Chen, C., Zhai, Y., Li, C. and Li, F. (2014) Improving the Efficiency of Cadmium Sulfide-Sensitized Titanium Dioxide/Indium Tin Oxide Glass Photoelectrodes Using Silver Sulfide as an Energy Barrier Layer and a Light Absorber. Nanoscale Research Letters, 9, Article No. 605.
https://doi.org/10.1186/1556-276X-9-605

has been cited by the following article:

• TITLE: Preparation of Multi-Wall Carbon Nanotubes/Graphene Composites with Cadmium Sulfide in Dye-Sensitized Solar Cells (DSSCs)

  AUTHORS: Entidhar Alkuam

  KEYWORDS: CdS, Multi-Wall Carbon Nanotubes/Graphene, Dye-Sensitized Solar Cell

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.11 No.6, June 29, 2021

  ABSTRACT: In the present work, Dye Sensitized Solar Cells (DSSCs) have been fabricated by utilizing a dense layer of photoelctrode cadmium sulfide thin film (CdS) as n-type, which prepared by spray coating, while p-type electrode was multi-wall carbon nanotubes/graphene (MWNT-G) composites. The experimental results showed the higher energy conversion efficiency for CdS/MWNT-G was 0.056% in comparison with the others, which were CdS/MWNT with 0.044% and CdS/G with 0.037% respectively, which referred to improvement in the conductivity by using MWNT-G. The microstructure and nanostructure of CdS, MWNT, G, and MWNT-G nanocomposite were carried out by employing Scanning Electron Microscopy (SEM). X-Ray Diffraction (XRD) has been used to get crystal size of CdS, Raman scattering, and optical absorption also used for characterizations the samples. This study promised to increase and enhance the conversion efficiency of photovoltaic devices.