Ivasishin, O.M., Semiatin, S.L., Markovsky, P.E., Shevchenko, S.V. and Ulshin, S.V. (2002) Grain Growth and Texture Evolution in Ti-6Al-4V during Beta Annealing under Continuous Heating Conditions. Materials Science and Engineering: A, 337, 88-96.
https://doi.org/10.1016/S0921-5093(01)01990-6

has been cited by the following article:

• TITLE: Microstructural Modeling of Thermally-Driven β Grain Growth, Lamellae & Martensite in Ti-6Al-4V

  AUTHORS: Matteo Villa, Jeffery W. Brooks, Richard P. Turner, Mark Ward

  KEYWORDS: Titanium, Welding, Rapid Heating, Phase, Alpha, Beta

  JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.10 No.3, July 17, 2020

  ABSTRACT: The microstructural kinetics of β grain growth in the β field of a Ti-6Al-4V alloy was studied by a series of controlled heat treatments at constant temperature rates. Heating rates of 5°C/s, 50°C/s and 500°C/s were considered, stopping at different peak temperatures. The thickness evolution of martensitic needles and lamellar α laths, formed on cooling, was also investigated, by soaking the material above its β-transus temperature and cooling down at 5°C/s, 50°C/s, 100°C/s and 300°C/s till ambient temperature. Quantitative microstructural analyses were used to measure the particle dimensions. The β grain growth kinetics was reasonably well described by a modified Avrami equation. The thickness of α lamellae was a function of the cooling rate and the β grain dimension in which they nucleated. The martensite needle thickness was shown to be a function of the cooling rate to which the material was subjected.