Kim, M.J., Heo, H.W., Suh, Y.K. and Song, C.K. (2011) Morphology Control of TIPS-Pentacene Grains with Inert Gas Injection and Effects on the Performance of OTFTs. Organic Electronics, 12, 1170-1176.
https://doi.org/10.1016/j.orgel.2011.03.034

has been cited by the following article:

• TITLE: Optimization of 6,13Bis(triisopropylsilylethynyl)pentacene (TIPS-Pentacene) Organic Field Effect Transistor: Annealing Temperature and Solvent Effects

  AUTHORS: Diallo Abdoul Kadri, Diallo Abdou Karim, Mané Seck, Kobor Diouma, Pasquinelli Marcel

  KEYWORDS: Tips-Pentacene, Transistor, Solvent, Annealing Temperature

  JOURNAL NAME: Materials Sciences and Applications, Vol.9 No.11, October 30, 2018

  ABSTRACT: In this contribution, we report on the effect of solvents with different boiling points and annealing temperature on the performance of TIPS-pentacene transistors. Several solvents have been used for TIPS-pentacene thin film processing: toluene, chlorobenzene and tetrahy-drofuran. To study the influence of solvent and temperature; the electrical parameters of TIPS-pentacene field effect transistor were measured. The highest values of mobilities were 7.1 × 10-3 cm2·V-1·s-1, 4.5 × 10-3cm2·V-1·s-1 and 1.43 × 10-3 cm2·V-1·s-1 respectively for TIPS-pentacene field effect transistor using chlorobenzene, toluene and tetrahydrofuran and annealed respectively at 120°C, 150°C and 120°C. We have correlated these electrical performances with AFM images in order to point out the role of morphological properties. It is found that the grain size, and roughness highly affect the electrical parameters.