Nakajima, K., Hogari, K., Zhou, J., Tajima, K. and Sankawa, I. (2003) Hole Assisted Fiber Design for Small Bending and Splice Losses. IEEE Photonics Technology Letters, 15, 1737-1739.
http://dx.doi.org/10.1109/LPT.2003.819723

has been cited by the following article:

• TITLE: Optimization of Macrobending Loss in Small and Large Mode Area Photonic Crystal Fibers

  AUTHORS: Faramarz E. Seraji, Samira Kasiri

  KEYWORDS: Optimization, Macrobending Loss, Photonic Crystal Fibers

  JOURNAL NAME: Open Access Library Journal, Vol.2 No.12, December 18, 2015

  ABSTRACT: Use of low bend loss optical fibers in fiber-to-the-home (FTTH) networks becomes unavoidable to improve the optical networks performance. One of the candidates is photonic crystal fibers (PCFs) for their low bend loss properties. This paper presents procedures for optimization of the bend loss of PCFs with small and large mode areas by using solvers Softwares Rsoft and Optifiber. The optimizations are performed with respect to bend radius, core radius, photonic crystal pitch and the ratio of air-filling factor. The lowest bend loss of 1 dB/cm was obtained at bend radius of 56 mm and core diameter of 22 micrometer.