Balestra, S., Cozzi, M., Giacomelli, G., Giacomelli, R., Giorgini, M., Kumar, A., Mandrioli, G., Manzoor, S., Margiotta, A.R., Medinaceli, E., Partizii, L., Popa, V., Qureshi, I.E., Rana, M.A., Sirri, G., Spurio, M., Togo, V. and Valieri, C. (2007) Bulk Etch Rate Measurements and Calibrations of Plastic Nuclear Track Detectors. Nuclear Instruments and Methods in Physics Research, B254, 254-258. http://dx.doi.org/10.1016/j.nimb.2006.11.056

has been cited by the following article:

• TITLE: Measure the Bulk Etch Rate Using the Time-Diameter Method

  AUTHORS: Hussein A. Ahmed, Alan S. Said Ahmad, Ari A. Mohammed

  KEYWORDS: Bulk Etch Rate, CR-39, Diameter-Time Measurements, Nuclear Track Detector (NTD)

  JOURNAL NAME: Materials Sciences and Applications, Vol.6 No.4, March 31, 2015

  ABSTRACT: The present work measured the bulk etch rate (VB) of solid state nuclear track detector by taking the diameter time measurement of alpha particle in CR-39 detector. The values of the track diameter have been found by using TRACK-TEST program from Yu et al. function and Brun et al. function with different energies of alpha particles. The results showed that the time-diameter (t-d) method gave good results of the bulk etch rate (VB) and these values were (1.705 and 1.72) μm·hr-1. They showed good agreement with the values measured by using the other methods, and it was a simple method because it required getting diameters of the tracks in the detector with the etching time.