Duenas, S., Castan, H., Garcia, H., De Castro, A. and Bailon, L. (2006) Influence of Single and Double Deposition Temperatures on the Interface Quality of Atomic Layer Deposited Al2O3 Dielectric Thin Films on Silicon. Journal of Applied Physics, 99, Article ID: 054902.
http://dx.doi.org/10.1063/1.2177383

has been cited by the following article:

• TITLE: Densification of Thin Aluminum Oxide Films by Thermal Treatments

  AUTHORS: V. Cimalla, M. Baeumler, L. Kirste, M. Prescher, B. Christian, T. Passow, F. Benkhelifa, F. Bernhardt, G. Eichapfel, M. Himmerlich, S. Krischok, J. Pezoldt

  KEYWORDS: Atomic Layer Deposition, Crystallization, Thermal Treatment, Aluminum Oxide

  JOURNAL NAME: Materials Sciences and Applications, Vol.5 No.8, June 30, 2014

  ABSTRACT: Thin AlOx films were grown on 4H-SiC by plasma-assisted atomic layer deposition (ALD) and plasma assisted electron-beam evaporation at 300°C. After deposition, the films were annealed in nitrogen at temperatures between 500°C and 1050°C. The films were analyzed by X-ray reflectivity (XRR) and atomic force microscopy (AFM) in order to determine film thickness, surface roughness and density of the AlOx layer. No differences were found in the behavior of AlOx films upon annealing for the two different employed deposition techniques. Annealing results in film densification, which is most prominent above the crystallization temperature (800°C). In addition to the increasing density, a mass loss of ~5% was determined and attributed to the presence of aluminum oxyhydroxide in as deposited films. All changes in film properties after high temperature annealing appear to be independent of the deposition technique.