B. J. Mac Donald and M. S. J. Hashmi, “Three-Dimensional Finite Element Simulation of Bulge Forming Using a Solid Bulging Medium,” Finite Elements in Analysis and Design, Vol. 37, No. 2, 2001, pp. 107-116.
http://dx.doi.org/10.1016/S0168-874X(00)00023-8

has been cited by the following article:

• TITLE: Experimental and Numerical Investigation of Cold Bulge Forming of Titanium Alloy Ti55

  AUTHORS: S. M. R. Tabatabaei, M. Safari, R. Shahrokh Esfahani, A. Abolghasemian. Sichani, M. Nourjani Pour Moghadam

  KEYWORDS: Cold Bulge Forming; Titanium Alloy Ti55; Abaqus/Explicit

  JOURNAL NAME: World Journal of Mechanics, Vol.3 No.9, December 10, 2013

  ABSTRACT: In this paper, cold bulge forming of titanium alloy Ti55 was investigated. This process was done successfully and titanium alloy Ti55 was formed completely. Also, in the numerical work, this process has been investigated using Abaqus/ Explicit code. The results show that there is a good agreement between experimental and numerical results. Mechanical properties of Titanium alloy Ti55 have been investigated before and after bulge forming. The results show that mechanical properties of titanium alloy Ti55 have been improved during bulge forming. Also, hardness, and thickness variation tests of sheet metal before and after bulge forming were performed and the same results to mechanical properties were obtained.