Hong, C.K., Kim, M.J., Oh, S.H., Lee, Y.-S. and Nah, C. (2008) Effects of Polypropyl-ene-g-(maleic anhydride/styrene) Compatibilizer on Mechanical and Rheological Properties of Polypropylene/Clay Nanocomposites. Journal of Industrial and Engi-neering Chemistry, 36, 14.
https://doi.org/10.1016/j.jiec.2007.11.001

has been cited by the following article:

• TITLE: Effect of Residual Maleic Anhydride in PP-g-MAH on the Thermo-Oxidative Aging Properties of RGF-PP

  AUTHORS: Junjie Tang, Pengwei Shi, Hao Duan, Kwang-Yoon Kim, Minqi Xin

  KEYWORDS: Residual Maleic Anhydride, Maleic Anhydride Grafted Polypropylene, RGF-PP, Thermo-Oxidative Aging

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.5 No.7, July 13, 2017

  ABSTRACT: The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibilizers with different content of residual maleic anhydride (MAH). It was shown that PP-g-MAH compatibilizer could significantly improve the mechanical properties of RGF-PP, while from thermal and morphological analysis results, the content of residual MAH had negative influence on long term thermo- oxidative aging properties of RGF-PP with adding PP-g-MAH compatibilizer; the lower the residual content of MAH is, the better the thermo stability of the PP-g-MAH is, and also the better the thermo-oxidative aging properties was obtained.