Nashida, N., Hinata, Y., Horio, M., Yamada, R. and Ikeda, Y. (2014) All-SiC Power Module for Photovoltaic Power Conditioner System. IEEE 26th International Symposium of Power Semiconductor Devices & IC’s (ISPSD 2014), Waikoloa, HI, 15-19 June 2014, 342-345. https://doi.org/10.1109/ISPSD.2014.6856046

has been cited by the following article:

• TITLE: Comparison between SiC- and Si-Based Inverters for Photovoltaic Power Generation Systems

  AUTHORS: Yuji Ando, Yasuhiro Shirahata, Takeo Oku, Taisuke Matsumoto, Yuya Ohishi, Masashi Yasuda, Akio Shimono, Yoshikazu Takeda, Mikio Murozono

  KEYWORDS: Silicon Carbide, Solar Cell, Inverter, Photovoltaic Device, Maximum Power Point Tracking, Lithium-Ion Battery

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.5 No.1, January 13, 2017

  ABSTRACT: 100-W class power storage systems were developed, which comprised spherical Si solar cells, a maximum power point tracking charge control-ler, a lithium-ion battery, and one of two different types of direct current (DC)-alter- nating current (AC) converters. One inverter used SiC met-al-oxide-semicon-ductor field-effect transistors (MOSFETs) as switching devices while the other used Si MOSFETs. In these 100-W class inverters, the ON resistance was considered to have little influence on the efficiency. Nevertheless, the SiC-based inverter exhibited an approximately 3% higher DC-AC conversion efficiency than the Si-based inverter. Power loss analysis indicated that the higher efficiency resulted predominantly from lower switching and reverse recovery losses in the SiC MOSFETs compared with in the Si MOSFETs.