[1] De Munck, J., Van Landuyt, K., Peumans, M., Poitevin, A., Lambrechts, P., Braem, M. and Van Meerbeek, B. (2005) A critical review of the durability of adhesion to tooth tissue: Methods and results. Journal of Dental Research, 84, 118-132. doi:10.1177/154405910508400204

has been cited by the following article:

• TITLE: Surface preparation and isotropic shear bond strength properties of superficial bovine dentin

  AUTHORS: Camila Sabatini, Sebastiano Andreana, Zhe Wu

  KEYWORDS: Resin Composite; Dentin Adhesion; Bond Strength; Isotropic; Surface Preparation; Failure Mode

  JOURNAL NAME: Open Journal of Stomatology, Vol.3 No.4, July 22, 2013

  ABSTRACT: The effect of different types of surface preparation with SiC abrasive paper on the shear bond strength (SBS) of superficial bovine dentin obtained from the incisal, middle and cervical thirds were evaluated. Dentin substrates were obtained with twenty specimens for each locationgrit combination. Superficial dentin was exposed and prepared to 120-, 320-, or 600-grit SiC; the dentin surfaces were treated with Optibond Solo Plus (Kerr) and polymerized for 20 s. The specimens were placed in a jig, filled with resin composite Z100 (3M-ESPE), polymerized for 40 s according to manufacturer’s instructions, and stored for 24 h at 37℃ and 100% humidity. After 24 h, SBS was measured using a loading testing machine (Ul-tradent) and expressed in megapascals. A two-way ANOVA and Tukey test were used for data analysis. No statistically significant effect of the location (P = 0.254) or interaction grit-location (P = 0.629) were observed on SBS. Statistically significant effect of the grit on the SBS was detected (P