SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.

 

Contact Us >>

Article citations

More>>

Arena, U. and Mastellone, M.L., (2006) Fluidized bed pyrolysis of plastic wastes. In: Scheirs, J. and Kaminsky, W., Eds., Feedstock Recycling and Pyrolysis of Plastic Wastes: Converting Waste Plastics into Diesel and Other Fuels, John Wiley & Sons, Chichester. doi:10.1002/0470021543.ch16

has been cited by the following article:

  • TITLE: Gasification of plastic waste as waste-to-energy or waste-to-syngas recovery route

    AUTHORS: Anke Brems, Raf Dewil, Jan Baeyens, Rui Zhang

    KEYWORDS: Plastic Waste; Re-Use; Gasification; Syngas; Char; Sustainability; Reaction Rate

    JOURNAL NAME: Natural Science, Vol.5 No.6, June 13, 2013

    ABSTRACT: The disposal of plastic solid waste (PSW) has become a major worldwide environmental problem. New sustainable processes have emerged, i.e. either advanced mechanical recycling of PSW as virgin or second grade plastic feedstock, or thermal treatments to recycle the waste as virgin monomer, as synthetic fuel gas, or as heat source (incineration with energy recovery). These processes avoid land filling, where the non-biodegradable plastics remain a lasting environmental burden. Within the thermal treatments, gasification and pyrolysis gain increased interest. Gasification has been widely studied and applied for biomass and coal, with results reported and published in literature. The application to the treatment of PSW is less documented. Gasification is commonly operated at high temperatures (> 600℃ to 800℃) in an air-lean environment (or oxygen-deficient in some applications): the air factor is generally between 20% and 40% of the amount of air needed for the combustion of the PSW. Gasification produces mostly a gas phase and a solid residue (char and ashes). The use of air introduces N2 in the product gases, thus considerably reducing the calorific value of the syngas, because of the dilution. The paper will review the existing literature data on PSW gasification, both as the result of laboratory and pilot-scale research. Processes developed in the past will be illustrated. Recently, the use of a sequential gasification and combustion system (at very high temperatures) has been applied to various plastic-containing wastes, with atmospheric emissions shown to be invariably below the legal limits. Operating results and conditions will be reviewed in the paper, and completed with recent own lab-scale experimental results. These results demonstrate that gasification of PSW can be considered as a first order reaction, with values of the activation energy in the order of 187 to 289 kJ/mol as a function of the PSW nature.