Jia, L.-C., Yan, D.-X., Cui, C.-H., et al. (2015) Electrically Conductive and Electromagnetic Interference Shielding of Polyethylene Composites with Devisable Carbon Nanotube Networks. Journal of Materials Chemistry C, 3, 9369-9378.
https://doi.org/10.1039/C5TC01822F

has been cited by the following article:

• TITLE: Enhancing the Mechanical Strength for a Microwave Absorption Composite Based on Graphene Nanoplatelet/Epoxy with Carbon Fibers

  AUTHORS: Maryam Jahan, Richard Osuemeshi Inakpenu, Kuo Li, Guanglin Zhao

  KEYWORDS: Microwave Absorption, Mechanical Strength, Graphene Nanoplatelet/Epoxy/Carbon Fiber Composite, Multifunctional Composite

  JOURNAL NAME: Open Journal of Composite Materials, Vol.9 No.2, April 29, 2019

  ABSTRACT: Microwave absorption (MWA) materials such as graphene nanoplatelet (GNP)/epoxy are mostly used as coatings on existing structures without considering mechanical properties. In this work, we aim to enhance the mechanical strength of the composite for multifunctional potentials. We used carbon fiber (four layers) to reinforce GNP/epoxy composite (2 mm thick) and investigated their multifunctional properties with GNP loading from 3 to 7 wt%. We measured the tensile strength, hardness, and MW absorption (26.5 - 40 GHz) of composite samples. Our results showed an increase in tensile strength to 109.1 ± 7.9 MPa with 7 wt% GNP in the composite from 15.3 MPa for pure epoxy. The hardness of the composites was also substantially enhanced with GNP loading up to 7 wt%. A MW absorption ratio of 72% was attained for the sample with 7 wt% GNP loading near 40 GHz. The homogenous dispersion of GNPs in the matrix reduces the stress concentration and minimizes the influence of the defects. The high MW absorption and large transmission loss together with enhanced mechanical strength provides a novel multifunctional material for potential applications.