SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

Article citations


Anjang, A., Chevali, V., Lattimer, B., Case, S., Feih, S. and Mouritz, A. (2015) Post-Fire Mechanical Properties of Sandwich Composite Structures. Composite Structures, 132, 1019-1028.

has been cited by the following article:

  • TITLE: Sandwich Structure Composite with Expandable Graphite Filled or Coated: Evaluation of Flame Retardancy and Mechanical Performances

    AUTHORS: Chenkai Zhu, Jingjing Li, Fanhao Ji, Xiaosu Yi, Chris Rudd, Xiaoling Liu

    KEYWORDS: Expandable Graphite, Sandwich, Honeycomb, Fire Resistance, Mechanical Performance

    JOURNAL NAME: Open Journal of Safety Science and Technology, Vol.9 No.1, February 14, 2019

    ABSTRACT: Sandwich composites are increasingly used in high-performance application due to their high specific stiffness, strength and thermal insulation. The sandwich composites were developed using honeycomb and carbon fibre reinforced composite face sheet in this study. Expandable graphite (EG) weighting 5 wt% and 10 wt% were filled in honeycomb or coated on face sheet to improve the fireproof performance. The vertical burning test, cone calorimetry test, thermal insulation analysis, scanning electron microscopy and mechanical test were taken into account. With the increase of EG in the sandwich composites, a significant improvement on flame retardancy with better thermal insulation, lower values of peak heat release rate and MAHRE were confirmed for sandwich composite with EG both coated and filled. In addition, the sandwich with EG coated on face sheet presented better fire resistivity and thermal insulation properties when compared to that with EG filled in honeycomb. However, more total smoke release was also observed for EG coated composites due to partial combustion of resin within sufficient heat and oxygen. Furthermore, no significant effect on the mechanical properties of composites was confirmed from both fireproof approaches.