Jiang, J., Chiew, S.P., Lee, C.K. and Tiong, P.L.Y. (2017) A Numerical Study on Residual Stress of High Strength Steel Box Column. Journal of Constructional Steel Research, 128, 440-450.
https://doi.org/10.1016/j.jcsr.2016.09.015

has been cited by the following article:

• TITLE: Effect of PWHT with Sheet-Type Ceramic Heater on Compressive Behaviors of Non-Stiffened Welded Steel Box Columns

  AUTHORS: May Phyo Aung, Mikihito Hirohata

  KEYWORDS: Residual Stress, Out-of-Plane Deformation, PWHT, Sheet-Type Ceramic Heater, Welded Box Column

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.6 No.1, January 24, 2018

  ABSTRACT: A series of fundamental experimental investigation was conducted in order to examine the effect of PWHT by sheet-type ceramic heater on the residual stress, deformation and compressive behavior of non-stiffened welded box columns. The sheet-type ceramic heater was able to control the required temperature history for PWHT with high accuracy. The welding-induced tensile and compressive residual stresses of the specimens were reduced by 90% and 76% respectively with PWHT. Besides, PWHT could reduce the welding-induced out-of-plane deformation by 22%. It was revealed that the PWHT specimens had a slight higher stiffness than the As-welded specimens when applying monotonic static compressive load on both As-welded and PWHT specimens. They could also enhance the ultimate compressive load capacity about 32% of that of the As-welded specimens. The effectiveness of PWHT with the sheet-type ceramic heater could be confirmed.