SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.

 

Contact Us >>

Article citations

More>>

Huang, Y.B. and Huo, Q.Y. (2006) The Application of Isocyanates Adhesive in Timber Industry. Journal of Heilongjiang Ecological Engineering Vocational College, No. 6, 34-35.

has been cited by the following article:

  • TITLE: Factor Affecting Gel Time/Process-Ability of Urea Formaldehyde Resin Based Wood Adhesives

    AUTHORS: Ravindra V. Gadhave, Prakash A. Mahanwar, Pradeep T. Gadekar

    KEYWORDS: Urea Formaldehyde Resins, Catalysts, Gel Time, Wood, pH, Polyvinyl Acetate, Composite

    JOURNAL NAME: Open Journal of Polymer Chemistry, Vol.7 No.2, May 31, 2017

    ABSTRACT: Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergoes cross-linking reaction and the formation of three dimensional cross linked structures takes place and bonding of wood particles in a hot press [1]. UF powder resins show high reactivity and good performance in the production and by their low price; however they lack in water resistance of the hardened resin [2]. Urea-formaldehyde (UF) resins are the most important type of adhesive resins for the production of wood based panels but process-ability and curing behavior of urea formaldehyde resin depended on various factors related to resin properties, types of wood and their properties, amount & type of catalyst, types and amount of polymers addition and environmental conditions [3]. This factor decides the process-ability of UF resin based composite during manufacturing of plywood, particle board and fiberboard. In this review paper, various factors affecting gel time and process-ability of UF resin based wood composite are reviewed.