TITLE:
A Study on Mechanical Properties of PMMA/Hydroxyapatite Nanocomposite
AUTHORS:
S. M. Zebarjad, S. A Sajjadi, T. Ebrahimi Sdrabadi, S. A Sajjadi, A Yaghmaei, B Naderi
KEYWORDS:
PMMA, Nano Hydroxyapatite, Mechanical Properties
JOURNAL NAME:
Engineering,
Vol.3 No.8,
August
12,
2011
ABSTRACT: This study is focused on the role of nano hydroxyapatite particles on the mechanical properties of PMMA/HA nanocomposites. In order to achieve a proper and homogeneous distribution of HA particles in the polymer matrix, mixer milling process was applied. Wear, compression and three-point bending tests were conducted. It was observed that wear rate decreased by increasing in HA content in both atmosphere and artificial saliva. The results of compression tests showed that the addition of 2.5 percent HA to PMMA promoted ultimate compressive strength, yield strength and modulus while caused to decrease elongation at break. Also it was elucidated that addition of HA more than 2.5 wt.% caused a decrease in both ultimate compressive strength and compression yield strength and an increase in elongation at break. The results of three-point bending tests on the PMMA cements containing 2.5 percent HA demonstrated the maximum bending strength value and modulus among all the HA containing formulations. However there was no direct proportionality between the results of bending tests and the HA content and the addition of HA to PMMA (up to 10 wt.%) did not change the bending properties significantly.