Losiewicz, B., Stepien, A., Gierlot, D. and Budniok, A. (1999) Composite Layers in Ni-P System Containing TiO2 and PTFE. Thin Solid Films, 349, 43-50.
http://dx.doi.org/10.1016/S0040-6090(99)00175-3

has been cited by the following article:

• TITLE: Design and Characterization of a Horizontal Double Impinging Jet Cell: Determination of Flow Modes at the Surface of a Flat Electrode

  AUTHORS: Désiré M. K. Abro, Pierre Dable, Fernando Cortez-Salazar, Véronique Amstutz, Edith Kouassi Kwa-Koffi, Hubert Girault

  KEYWORDS: Impinging Jet Cell, Hydrodynamic, Flow Regimes, Electrocodeposition

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.4 No.8, August 26, 2016

  ABSTRACT: An electrochemical cell consisting of a double horizontal Impinging Jet Cell (IJC) has been conceived and characterized. The purpose of this system is the simultaneous electrodeposition of a composite metal/particle coating on both surfaces of a metal sheet. The silica particles imprint in the nickel matrix has allowed to distinguish four different flow areas onto the electrode namely the stagnation area, the radial flow area characterized by a higher flow speed, the return flow area that involves gravity effect, and the drainage area with a constant draining speed. Based on the limiting current evolution as a function of the Reynolds number, three flow modes were extracted: the Laminar Low Flow (LLF), the Laminar High Flow (LHF) and the Disturbance. The IJC investigated ensures a laminar flow for a large range of flow rate from a nozzle-to-sample distance of 19 mm and creates an laminar flow ovoid plan merged with the sample for the high flows.