SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.

 

Contact Us >>

Article citations

More>>

Han, J., Gong, H.B., Yang, X.P., Qiu, Z.W., Zi, M., Qiu, X.F., Wang, H.Q. and Cao, B.Q. (2015) Indium-Free Cu/ Fluorine Doped ZnO Composite Transparent Conductive Electrodes with Stretchable and Flexible Performance on Poly(Ethylene Terephthalate) Substrate. Applied Surface Science, 332, 549-556.
http://dx.doi.org/10.1016/j.apsusc.2015.01.096

has been cited by the following article:

  • TITLE: Characteristics Improvement of PEDOT:PSS Transparent Conductive Film Prepared by Ink-Jet Printing

    AUTHORS: Atsushi Nitta, Kazuya Kawahara, Kohei Miyata

    KEYWORDS: PEDOT:PSS, Ink-Jet Printing, Transparent Conductive Film, Flexible Devices

    JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.6 No.8, August 4, 2016

    ABSTRACT: Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O3) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.