SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

Article citations


Clark, C.R., Muntifering, B.R. and Jue, J.F. (2007) Production and Characterization of Atomized U-Mo Powder by the Rotating Electrode Process. Proceedings of the 28th International Meeting on Reduced Enrichment for Research and Test Reactor, Czech Republic, 29 October-23-27 November 2007.

has been cited by the following article:

  • TITLE: Atomization of UMo Particles under Nitrogen Atmosphere

    AUTHORS: Luis Olivares, Jaime Lisboa, Jorge Marin, Mario Barrera, Alberto Navarrete

    KEYWORDS: Atomization, UMo Particles, Dispersion, Nuclear Fuel

    JOURNAL NAME: World Journal of Nuclear Science and Technology, Vol.6 No.1, January 7, 2016

    ABSTRACT: Generally, the atomization of UMo particles is done under vacuum or argon atmosphere, and the surface modification of these UMo particles is, usually, carried on through a further process. The techniques for surface modification of atomized UMo particles, aimed to control the Fuel/Matrix interaction, involve, in some cases, complex methodologies and often with minor effect due to the limited solubility of third elements in solid UMo alloy. The atomization and surface conditioning, applied in separate stages, may affect the efficiency of powder production process. Then, the main goal of this study is to explore the surface modification of UMo particles in liquid state or during the solidification that follows the centrifugal atomization process. Through the change of atomization atmosphere, could be possible to promote liquid/gas reactions, with a higher solubility of the modifier element in micro drops of UMo alloy, before they become solid particles. This paper presents comparative results of centrifugal atomization of UMo particles, carried out under inert argon and reactive nitrogen atmospheres. Dissolved nitrogen contents, measured by SEM-EDS analyses, reached up to 7.57 wt% at the center of under nitrogen atomized particles, very higher than 0.84 wt% of nitrogen measured at the center of UMo particle atomized under argon. The presence of uranium nitride was partially verified by conventional XRD analysis. Nevertheless, Out-of-Pile interaction test result, reveals decreasing of aluminium contents into UMo particles atomized under nitrogen atmosphere; Just 3.77 wt% of Al was the maximum content detected in the center of these particles, very lower than 29.11 wt% of Al measured inside UMo particles atomized under argon. Finally, it is possible to conclude that the atomization under reactive atmosphere may modify the surface composition and the behavior of UMo fuel particles dispersed in aluminium, for dispersion type nuclear fuel application.