Strength Characterization of E-glass Fiber Reinforced Epoxy Composites with Filler Materials

Abstract

In this research work, an investigation was made on the mechanical properties of E-glass fiber reinforced epoxy composites filled by various filler materials. Composites filled with varying concentrations of fly ash, aluminum oxide (Al2O3), magnesium hydroxide (Mg(OH)2) and hematite powder were fabricated by standard method and the mechanical properties such as ultimate tensile strength, impact strength and hardness of the fabricated composites were studied. The test results show that composites filled by 10% volume Mg(OH)2 exhibited maximum ultimate tensile strength and hardness. Fly ash filled composites exhibited maximum impact strength.

Share and Cite:

Devendra, K. and Rangaswamy, T. (2013) Strength Characterization of E-glass Fiber Reinforced Epoxy Composites with Filler Materials. Journal of Minerals and Materials Characterization and Engineering, 1, 353-357. doi: 10.4236/jmmce.2013.16054.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] A. Yasmin and I. M. Daniel, “Mechanical and Thermal Properties of Graphite Platelet/Epoxy Composites,” Polymer, Vol. 45, No. 24, 2004, pp. 8211-8219.
http://dx.doi.org/10.1016/j.polymer.2004.09.054
[2] N. Hameed, P. A. Sreekumar, B. Francis, W. Yang and S. Thomas, “Morphology, Dynamic Mechanical and Thermal Studies on Poly(styrene-co-acrylonitrile) Modified Epoxy Resin/Glass Fibre Composites,” Composites Part A, Vol. 38, No. 12, 2007, pp. 2422-2432.
http://dx.doi.org/10.1016/j.compositesa.2007.08.009
[3] R. N. Rothon, “Mineral Fillers in Thermoplastics: Filler Manufacture and Characterization,” Advances in Polymer Science, Vol. 139, 1999, pp. 67-107.
[4] Cs. Varga, N. Miskolczi, L. Bartha and G. Lipoczi, “Improving the Mechanical Properties of Glass-Fibre-Reinforced Polyester Composites by Modification of Fibre Surface,” Materials and Design, Vol. 31, 2010, pp. 185-193.
[5] M. Single and V. Chawla, “Mechanical Properties of Epoxy Resin-Fly Ash Composite,” Journal of Minerals and Materials Characterization and Engineering, Vol. 9, No. 3, 2010, pp. 199-210.
[6] R. K. Goyal, A. N. Tiwari and Y. S. Negi, “Micro Hardness of PEEK/Ceramic Micro- and Nano Composites: Correlation with Halpin-Tsai Model,” Materials Science and Engineering, Vol. 491, No. 1-2, 2008, pp. 230-236.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.