[1]
|
J. N. Coleman, U. Khan, W. J. Blau and Y. K. Gun’ko, “Small but Strong: A Review of the Mechanical Properties of Carbon Nanotube-Polymer Composites,” Carbon, Vol. 44, No. 9, 2006, pp. 1624-1652.
http://dx.doi.org/10.1016/j.carbon.2006.02.038
|
[2]
|
P. Raju Mantena, Alexander H. D. Cheng, Ahmed Al-Ostaz and A. M. Rajendran, “Blast and Impact Resistant Composite Structures for Navy Ships Composite Structures and Nano-Engineering Research” Proceedings of the 2008 ONR Solid Mechanics Program—Marine Composites and Sandwich Structures, University of Maryland, Adelphi, 2009, pp. 417-426.
|
[3]
|
H. Kolsky, “An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading,” Proceedings of the Royal Society of London, London, B62, 1949, pp. 676-700
|
[4]
|
P. Jindal, S. Pande, P. Sharma, V. Mangla, A. Chaudhury, Deepak Patel, B. P. Singh, R. B. Mathur and M. Goyal, “High Strain Rate Behavior of Multi-Walled Carbon Nanotubes-Polycarbonate Composites,” Composites Part B: Engineering, Vol. 45, No. 1, 2013, pp. 417-422.
http://dx.doi.org/10.1016/j.compositesb.2012.06.018
|
[5]
|
N. K. Naik and Y. Perla, “Mechanical Behaviour of Acrylic under High Strain Rate Tensile Loading,” Polymer Testing, Vol. 27, No. 4, 2008, pp. 504-512.
http://dx.doi.org/10.1016/j.polymertesting.2008.02.005
|
[6]
|
A. Jadhav, E. Woldesenbet and S.-S. Pang, “High Strain Rate Properties of Balanced Angle-Ply Graphite/Epoxy Composites,” Composites: Part B, Vol. 34, No. 4, 2003, pp. 339-346.
http://dx.doi.org/10.1016/S1359-8368(03)00003-9
|
[7]
|
W. Chen, F. Lu and M. Cheng, “Tension and Compression Tests of Two Polymers under Quasistatic and Dynamic Loading,” Polymer Testing, Vol. 21, No. 2, 2002, pp. 113-121. http://dx.doi.org/10.1016/S0142-9418(01)00055-1
|
[8]
|
R. B. Mathur, S. Pande, B. P. Singh and T. L. Dhami, “Electrical and Mechanical Properties of Multi-Walled Carbon Nanotubes Reinforced PMMA and PS Composites,” Polymer Composites, Vol. 29, No. 7, 2008, pp. 717-727.
http://dx.doi.org/10.1002/pc.20449
|
[9]
|
Y. H. Xu, Q. F. Li, D. Sun, W. N. Zhang and G.-X. Chen, “A Strategy to Functionalize the Carbon Nanotubes and the Nanocomposites Based on Poly(L-lactide),” Industrial & Engineering Chemistry Research, Vol. 51, No. 42, 2012, pp. 13648-13654.
http://dx.doi.org/10.1021/ie300989w
|
[10]
|
J. Malzbender, G. de With and J. M. J. den Toonder, “Elastic Modulus, Indentation Pressure and Fracture Toughness of Hybrid Coatings on Glass,” Thin Solid Films, Vol. 366, No. 1-2, 2000, pp. 139-149.
http://dx.doi.org/10.1016/S0040-6090(00)00656-8
|
[11]
|
J. Malzbender and G. de With, “Energy Dissipation, Fracture Toughness and the Indentation Load-Displacement Curve for Coated Materials,” Surface and Coatings Technology, Vol. 135, No. 1, 2000, pp. 60-68.
http://dx.doi.org/10.1016/S0257-8972(00)00906-3
|
[12]
|
R. S. Ruoff, D. Qian and W. K. Liu, “Mechanical Properties of Carbon Nanotubes: Theoretical Predictions and Experimental Measurements,” C. R. Physique, Vol. 4, No. 9, 2003, pp. 993-1008.
http://dx.doi.org/10.1016/j.crhy.2003.08.001
|
[13]
|
A. Sears and R. C. Batra, “Macroscopic Properties of Carbon Nanotubes from Molecular-Mechanics Simulations,” Physical Review B, Vol. 69, 2004, Article ID: 235406.
|
[14]
|
Ma, A. Lu, J. Yang, S. H. Ka and M. Ng, “Quantitative Non-Covalent Functionalization of Carbon Nanotubes,” Journal of Cluster Science, Vol. 17, No. 4, 2006, pp. 599-608. http://dx.doi.org/10.1007/s10876-006-0076-7
|
[15]
|
Mostafa Shazly, David Nathenson and Vikas Prakash, “Modelling of High Strain Rate Deformation, Fracture and Impact Behavior of Advances Gas Turbine Engine Materials at Low and Elevated Temperatures,” 2003, NASA CR-2003-212194.
|