The Design of an Intelligent Security Access Control System Based on Fingerprint Sensor FPC1011C
Yan Wang, Hongli Liu, Jun Feng
DOI: 10.4236/cs.2010.11005   PDF    HTML     10,645 Downloads   20,571 Views   Citations


This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition module and a wireless alarm module were designed by using the fingerprint sensor FPC1011C and GPRS module SIM100 respectively. The whole system was implemented wireless alarm through messages and GPRS-Internet in the GSM/GPRS web. In order to achieve the simple and high Real-time system, the μC-Linux system migration was also implemented.

Share and Cite:

Wang, Y. , Liu, H. and Feng, J. (2010) The Design of an Intelligent Security Access Control System Based on Fingerprint Sensor FPC1011C. Circuits and Systems, 1, 30-33. doi: 10.4236/cs.2010.11005.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] K. L. Zhou and Z. X. Lu, “Design of Vehicle Locks Based on DSP and Fingerprint Identification System,” Journal of Shanxi University of Science & Technology, Vol. 27, No. 5, 2009, pp. 103105.
[2] C. G. Xie, “ARMBased Automatic Fingerprint Identifica-tion System,” Microcomputer Information, Vol. 25, No. 14, 2009, pp. 292294.
[3] H. Guo, Y. S. Guo and Y. Chen, “The Implementation of Remote Meter Reading System Based on Linux and GPRS,” Application of Electronic Technique, Vol. 34, No. 11, 2008, pp. 8284.
[4] F. Ding, “ARMBased Fingerprint Identification System Research and Implementation of [D],” South China Uni-versity of Technology, Guangzhou, 2007.
[5] Z. M. Ma and Y. H. Xu, “ARM Based Embedded Pro-cessor Architecture and Application,” Beijing University of Aeronautics and Astronautics Press, Beijing, 2002.
[6] J.M. Nam, S.M. Jung, D.H. Yang and M.K. Lee, “Design and Implementation of 160 × 192 Pixel Array Capaciti-veType Fingerprint Sensor,” Circuits, Systems & Signal Processing, Vol. 24, No. 4, 2005, pp. 401413.
[7] L. Zhang, “Based on DSP and RF Card Embedded Fin-gerprint Identification System Design and Implementation of [D],” University of Electronic Science and Technology of China, Chengdu, 2009.
[8] K. AlBegain, I. Awan and D. D. Kouvatsos, “Analysis of GSM/GPRS Cell with Multiple Data Service Classes,” Wireless Personal Communications, Vol. 25, No. 1, 2003, pp. 4157.
[9] Y. Li, “ΜCLinux Based on ARM Embedded System Theory and Application,” Tsinghua University Press, Beijing, 2009.
[10] J. K. Zhang and X. Q. Zhang, “Embedded Linux System Development Technology Xiangjie―Based on ARM,” Posts & Telecom Press, Beijing, 2006.
[11] M. F. Du, “Development of Ethernet Interface for Smart Entry Controller Based on ARM & Linux Architecture,” Computer Engineering, Vol. 33, No. 16, 2007, pp. 234 236.
[12] C. J. Zhang, “System of Defending to Rob by Tailing Behind of Double Gate by Chip Microcomputer Control,” Computer Engineering and Applications, Vol. 43, No. 5, 2007, pp. 7981.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.