Corrosion-Wear of ST60-Mn Steel in Cassava Juice

Abstract

Steels are used widely for production of machine components due to their versatility, low cost, ease of production and modification of their properties through heat-treatment. ST60Mn Steel is one of the common high strength steel produced in Nigeria and utilized for machine building purposes. Components made from this materials failed by wear, corrosion or both mechanism. The aim of this paper is to determine the influence of austempering heat-treatment on the corrosion-wear resistance of ST60Mn steel in cassava juice. The heat-treatment was performed by varying the austenitizing temperature, austempering temperature and time. The corrosion wear resistance was investigated under an instrumented pin-on-disc wear testing machine with the steel samples dipped in the cassava juice. The results obtained showed that the austempered ST60Mn steel has a wear rate of 3.0μg/cycle. While, the un-heat-treatment sample possess 70.1μg/cycle. This is a tremendous improvement in corrosion wear rate through the austempering heat treatment.

Share and Cite:

M. Bodude, W. Ayoola, D. Esezobor and A. Agbeleye, "Corrosion-Wear of ST60-Mn Steel in Cassava Juice," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 2, 2012, pp. 153-158. doi: 10.4236/jmmce.2012.112012.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Zum-Gahr K. H., (1982): Relation between abrasive wear rate and the microstructure of metals, proceedings of the International Conference on wear of Materials, Reston.
[2] Kaleten, A. Y; Lyzhkov, A. G. (2007): Alloying and heat treatment of steels with baintic structure. Metal Science and Heat-treatment. Vol. November 10 pp. 731 – 735.
[3] Umorus, L.E.; A. O. Akinola and M. O. Adeoye (2006): Corrosion-wear. Journal of Applied Sciences Research Vol. 2. No. 9 pp. 529 – 532.
[4] Williams, K. (2000): Plant Engineering Hardbook 2nd ed. McGraw – Hill Book Copy pp. 5 – 44.
[5] Institution of Metallurgists (1984): Development for future foundry property. The metallurgists and Materials Technologists, Vol. 16 No. 9 pp. 433.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.