[1]
|
M.M Thwe., K Liao. (2003) Comp. Sci. Tech,, 63 ,375
|
[2]
|
M.S Sreekala., J.George, M.G Kumaran., S. Thomas (2002) Comp. Sci. Technol. 62 339.
|
[3]
|
James R. Reeder. K. Song, P. Chunchu, D. R. Ambur, “Postbukling and growth of delamination in composite plates subjected to axial compression.” AIAA journal, 2002.
|
[4]
|
James R. Reeder and John R. Crews. “Mixed Mode Bending Method for Delamination Testing.” Published in AIAA Journal, vol 28, 1990, pages 1270-1276
|
[5]
|
L. P. Borrego , F. V. Antunes, Fatigue Crack Growth Behaviour Under Mixed-Mode Loading, anales de mecánica de la fractura vol. 22 (2005).
|
[6]
|
M.G.D. Geers a,b, R. de Borst , T. Peijs, Mixed numerical-experimental investigations of non-local characteristics of random-fiber-reinforced composites, Composites Science and Technology 59 (1999) 1569-1578.
|
[7]
|
P. Naghipour, M. Bartsch, Effect of fiber angle orientation and stacking sequence on mixed mode fracture toughness of carbon fiber reinforced plastics: Numerical and experimental investigations, Journal of Materials Science and Engineering (2009).
|
[8]
|
M. Nikbakht, and N. Choupani, Numerical Investigation of Delamination in Carbon-Epoxy Composite using Arcan Specimen, International Journal of Mechanical, Industrial and Aerospace Engineering 2(4) 259-266, 2008.
|
[9]
|
Robert Zemcik & Vladislav Las, Numerical and Experimental Analyses of the Delamination of Cross-Ply Laminates, Journal of Materials and technology 42 (4), (2008) 171–174.
|
[10]
|
Hossein Saidpour, Mehdi Barikani, and Mutlu Sezen, Mode-II Interlaminar Fracture Toughness of Carbon/Epoxy Laminates, Iranian Polymer Journal 12 (5), 2003, 389-400.
|
[11]
|
Autar K.Kaw, “Mechanics of Composite Materials”, 2nd Edition, Taylor & Francis Group Publications, New York, 1999.
|
[12]
|
M.M.Schwartz, Composite Materials Handbook, McGraw – Hill book Company,New York, 1983.
|
[13]
|
ASTM Standards, “ASTM D3039: Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials,” ASTM, West Conshohohoken, PA, 1995, pp. 99-109.
|
[14]
|
ASTM D 5045-99 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release rate of Plastic Materials.
|
[15]
|
ASTM 1820-05 Standard Test for Measurements of Fracture Toughness.
|
[16]
|
F. Dharmawan, G. Simpson, I. Herszberg, S. John. “Mixed mode fracture toughness of GFRP composites.” Composite Structures,2006.
|
[17]
|
ANSYS - V10 User manual.
|
[18]
|
ASTM D 5045-99 “Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release rate of Plastic Materials”
|
[19]
|
ASTM 1820-05 ”Standard Test Method for Measurement of Fracture toughness”.
|