[1]
|
NALCO brocher (2008) “A profile on National Aluminium Company” Bhubaneswar.
|
[2]
|
Rao R. Bhima., Swain Ranjita., Prasad A. R., Prakash S., Rao K.K., Das S.K., Das B., Reddy P.S.R., Mishra C.R and Pani B.S. (2006) “Utilization of partially laterised khondalite rocks for refractory applications” 60th NMD-ATM, pp 6-7.
|
[3]
|
T/MPET/515/July/ (2005) Collaborative project report of IMMT and NALCO, Bhubaneswar “Studies on production of value added materials from partially laterized khondalite” Phase I.
|
[4]
|
T/MPET/554/April/ (2006) Collaborative project report of IMMT and NALCO, Bhubaneswar “Studies on production of value added materials from partially laterized khondalite” Phase II.
|
[5]
|
T/MPD/598/March/ (2007) Collaborative project report of IMMT and NALCO, Bhubaneswar “Studies on production of value added materials from partially laterized khondalite” Phase III.
|
[6]
|
Csoke B., Hatvani Zoltan., Papanastassiou D., and Solymar Karoly. (2004) “Investigation of grindiability of diosporic bauxites in dry, aqueous and alkaline media as well as after high pressure crushing” Int. J. Miner. Process 74S, pp 123-128.
|
[7]
|
Ozkahraman T and Sirin M (1998) “The use of brittleness test in determination of grindiability and crushing resistance of rocks and marbles” Innovations in mineral and coal processing, pp 33-36.
|
[8]
|
Ozkahraman H. T. (2005) “A meaningful expression between bond work index, grindiability index and friability value” Mineral Engineering 18, pp 1057-1059.
|
[9]
|
Sener S. and Ozbayoglu (1998) “Effect of heat treatment on grindiability of ulexite” Innovative in Mineral and Coal processing, pp 29-31.
|
[10]
|
Bond F. C. (1954) “Crushing and Grinding Calculations” CIM Bulletin, Vol. 47, No 507, pp. 466-472.
|
[11]
|
Bond, F.C, (1961) “Crushing and Grinding Calculations” Part I, Br. Chem. Eng? Vol. 6, No. 6, s. 378-385,.
|
[12]
|
Safonav A. I., Suss A. G., Panov A. V., Luk’yanov I. V., Kuznestova N. V. and Damaskin, A. A. (2009) “Effect of process parameters on the grindability and Bond index of bauxites and alumina-bearing ore” Metallurgist, Vol. 53, Nos. 1-2, p 57.
|
[13]
|
Mucsi Gabor. (2008) “Fast test method for the determination of the grindability of fine materials” Chemical engineering research and design, Vol. 86, No. 4, pp 395-400.
|
[14]
|
Magdalinovic N. (2003) “Abbreviated test for quick determination of Bond’s work index” journal of Mining and Metallurgy A: Mining, p 1.
|
[15]
|
Taylor and Francis Group (2007) “Powder handling and operations part - 1” LLC, pp 3-4, p7& p10.
|
[16]
|
Yin Wanzhong., Han Yuexin., Wei Xinachao., Yuan Zhitao and Yu Fujia. (2004) “Research on selective grinding behaviours of bauxite” Mining science and technology, pp 577-581.
|
[17]
|
Levin J. (1989) “Observations on the Bond standard grindiability test, and a proposal for a standard grindiability test for fine materials” J. S. Afr. Min. Metall., Vol. 89, no. 1, pp 13-21.
|
[18]
|
Haese U., Scheffler P and Fasbander H. (1975) ZEMENT-Kalk-Gips 8, pp 316-324.
|
[19]
|
Hower James. C. (1990) “Hardgrove grindability index and petrology used as an enhanced predictor of coal feed rate” CAER – University of Kentucky, Center for Applied Energy research, Vol. 1, No. 6, pp 1-2.
|
[20]
|
ACARP “Hardgrove grindability index” Unit 1, pp 1-6.
|
[21]
|
Altindag R. (2003) “Correlation of specific energy with rock brittleness concepts on rock cutting” The J. of the south African Institute of Mining and Mettalurgy, pp 163-172.
|
[22]
|
Tamrock. (1984) “Handbook on surface drilling and blasting” Painofaktorit, Finland, pp 308.
|
[23]
|
Prasher C. L. (1987) “Crushing and grinding process handbook” John Wiley & Sons Ltd.,New York, p 474.
|
[24]
|
Tichanek Frantisek. (2008) “Contribution to determination of coal grindability using Hardgrove method” Volume LIV, No. 1, pp 27-32.
|
[25]
|
McIntyre, A and Plitt, L.R. (1980) “The interrelationship between Bond and Hardgrove grindabilities” CIM Bulletin, pp 149-155.
|
[26]
|
Hower, J.C., Barton, L.S and Moshier, S.O, (1992) “Application of the Hardgrove grindability index in carbonate characterization. Minerals and Metallurgical Processing”, pp 146-150.
|