Studies of Preparation and Characteristics in Borosilicate Photosensitive Glass-Ceramics
Tao Zheng, Xin Xu, Jingsheng Pan, Shengchun Xiao, Jingwen Lv
DOI: 10.4236/msa.2012.32015   PDF    HTML     5,944 Downloads   9,984 Views   Citations


Photosensitive glass-ceramics have been extensively studied in recent years in that it is an attractive high diffraction efficiency grating materials. It is based on Stookey’s mixed fluoride sodium glass system for us to adopt, design prescriptions on the basis of SiO2-Na2O-Al2O3-ZnO for the glass main component and a series of glass doped with CeO2, AgNO3 and NaF etc. melted at about 1450?C, and the glass have good optical property (homogeneity, without bubble and stripe, high transparency). The borosilicate glass was exposed by ultraviolet light, and then after the heat treatment of the sample, the measurement of ultraviolet-visible-near infrared absorption spectrum and the X ray diffraction of exposure part was performed.

Share and Cite:

T. Zheng, X. Xu, J. Pan, S. Xiao and J. Lv, "Studies of Preparation and Characteristics in Borosilicate Photosensitive Glass-Ceramics," Materials Sciences and Applications, Vol. 3 No. 2, 2012, pp. 98-102. doi: 10.4236/msa.2012.32015.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] V. I. Sukhanov, D. N. Sitnik, I. V. Tunimanova and V. A. Tsekhomsky, “Photochromic Glasses as Hologram Recording Media,”Soviet Journal of Optical Technology, Vol. 37, No. 12, 1970, pp. 796-797.
[2] Y. Z. Xu, H. Y. Tam, S. Y. Liu and M. S. Demokan, “Pump-Induced Thermal Effects in Er-Yb Fiber Grating DBR Lasers,” IEEE Photonics Technology Letters, Vol. 10, No. 9, 1998, pp. 1253-1255. doi:10.1109/68.705607
[3] J. Lumeau, A. Sinitskii, L. Glebova, L. B. Glebov and E. D. Zanotto, “Method to Assess the Homogeneity of Partially Crystallized Glasses: Application to A Photo-Thermo-Refractive Glass,” Journal of Non-Crystalline Solids, Vol. 355, No. 34-36, 2009, pp. 1760-1768. doi:10.1016/j.jnoncrysol.2009.05.054
[4] J. W. Zhou and X. Q. Song, “Theory and Application of Photosensitive Glass,” University Chemistry, Vol. 10, No. 2, 1995, pp. 27-30.
[5] J. Lumeau, L. Glebova, V. Golubkov, E. D. Zanotto and L. B. Glebov, “Origin of Crystallization-Induced Refractive Index Changes in Photo-Thermo-Refractive Glass,” Optical Materials, Vol. 32, No. 1, 2009, pp. 139-143. doi:10.1016/j.optmat.2009.07.007
[6] M. Efimov, L. B. Glebov and H. P. Andre, “Measurement of the Induced Refractive Index in a Photo-Thermo-Refractive Glass by a Liquid-Cell Shearing Interferometer,” Applied Optics, Vol. 41, No. 10, 2002, pp. 1864-1871. doi:10.1364/AO.41.001864
[7] L. Glebova, J. Lumeau, M. Klimov, E. D. Zanotto and L. B. Glebov, “Role of Bromine on the Thermal and Optical Properties of Photo-Thermo-Refractive Glass,” Journal of Non-Crystalline Solids, Vol. 354, No. 2-9, 2008, pp. 456-461. doi:10.1016/j.jnoncrysol.2007.06.086
[8] S. Santran, M. M. Rosas, L. Canioni, L. Sarger, L. Glebova, A. Tirpak and L. Glebov, “Nonlinear Refractive In- dex of Photo-Thermo-Refractive Glass,” Optical Materials, Vol. 28, No. 4, 2006, pp. 401-407. doi:10.1016/j.optmat.2005.02.004
[9] G. H. Sigel and R. J. Ginther, “The Effect of Iron on the Ultraviolet Absorption of High Purity Soda-Silica Glass,” Glass Technology, Vol. 9, 1968, pp. 66-70.
[10] K. Sivaiah, K. N. Kumar, V. Naresh and S. Buddhudu, “Structural and Optical Properties of Li+: PVP & Ag+: PVP Polymer Films,” Materials Sciences and Applica- tions, Vol. 2, No. 11, 2011, pp. 1688-1696.
[11] F. H. ElBatal and M. A. Azooz, “Preparation and Characterization of Some Multicomponent Silicate Glasses and Their Glass-Ceramics Derivatives for Dental Applications,” Ceramics International, Vol. 35, No. 3, 2009, pp. 1211-1218. doi:10.1016/j.ceramint.2008.06.009
[12] M. Efimov, L. B. Glebov, L. N. Glebova, K. C. Richardson, and V. I. Smirnov, “High-Efficiency Bragg Gratings in Photo-Thermo-Refractive Glass,” Applied Optics, Vol. 38, No. 4, 1999, pp. 619-627. doi:10.1364/AO.38.000619
[13] H. J. Pan, C. Y. Lin, U. S. Mohanty and J. H. Chou, “Synthesis of Sn-3.5 Ag Alloy Nanosolder by Chemical Reduction Method,” Materials Sciences and Applications, Vol. 2, No. 10, 2011, pp. 1480-1484. doi:10.4236/msa.2011.210199

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.