The Influence of Tunable LED Lighting Systems on Consumer Food Label Perceptions

DOI: 10.4236/fns.2016.77058   PDF   HTML   XML   1,608 Downloads   2,326 Views   Citations

Abstract

A study was conducted in a grocery store simulation lab at a large Mid-Western university to measure consumer perceptions of meat package label design variations under different LED lighting conditions. A quasi-experimental approach using a multi-group between-within subjects’ post-test only design measured participants’ responses to the novel meat labels. Philip’s HUE consumer LED light bulbs were varied with different colors over beef steak package labels from 2700 K (RED) - 7000 K (BLUE). Goose neck lamps over the packages were used to create the display lighting simulations. The researchers determined that there was evidence of label and lighting interactions which influenced consumer perceptions of nutrition label information both between and within subject groups.

Share and Cite:

Clare, G. and Hancer, N. (2016) The Influence of Tunable LED Lighting Systems on Consumer Food Label Perceptions. Food and Nutrition Sciences, 7, 566-576. doi: 10.4236/fns.2016.77058.

Received 18 May 2016; accepted 14 June 2016; published 17 June 2016

1. Introduction

New-to-market Philip’s Hue LED lighting systems use network controls and modifiable lighting scenes which may offer differential advantages for retailers attempting to highlight important products or product information. Network controlled LED lights may interact with label design elements (e.g. text, graphics) when used in combination with label color variations that are distinct from black and white text common on meat labels. This study measured the effects of label design and light interactions on consumer perception of color and black and white label messages. The influence on consumers of perceived differences between labels under different LED lighting scenes may provide retailers with opportunities to increased attention to targeted label message components such as nutritional information for shoppers, locally produced brands, or food safety information. The effects on consumers of new-to-market LED lighting systems, such as Philips Hue light bulbs when controlled for Kelvin color temperature impact product, packaging, and labeling perceptions in simulated store environments, are not well understood.

2. Literature Review

Prior research has demonstrated the importance of label information to consumers evaluating meat products [1] . The role of colored label information compared to black text for influencing consumer decision making for meat purchases requires additional research pertaining to LED lighting. According to color theory, emotions can be influenced by certain colors, measured by wavelengths of visible light. The colors red and blue are posited to elicit specific emotional responses from consumers. Research has posited the emotional responses to color are stimulated by higher color saturation and lighter colors produce the opposite effect [2] [3] . Brand icon shape manipulations and red or blue color packaging variations have been demonstrated to influence consumer perceptions about brand personality and purchase intentions [4] [5] . Packaging variations incorporating angular versus rounded shapes have suggested greater consumer-perceived approachability of food items versus perceived confrontation [6] . Researchers have also found that visual cues such as large bulleted print, color, borders, and shapes are more likely to attract consumer attention [7] . The complex interplay of label information design, packaging, and the store environment or the system of meat retailing needs further study with the goal of understanding methods to increase consumer attention to product messages with the goal of influencing purchase intentions. Improving meat department lighting and labeling systems may offer differential advantages compared to relatively price inelastic commodities in grocery stores such as consumer packaged goods. To achieve this goal, researchers must better understand customers interpret the interplay LED lighting color variations and black and white versus colored label design components, and if color labels produce measurable effects on consumers.

Characteristics of light bulbs are described with various terminologies including: lumens, foot candles (LUX), color rendering index (CRI), and Kelvin color temperature. Lumens are defined as the amount of light that the human eye is able to see [8] . Foot candles are the measurement units indicating the amount of illumination produced by a source of one candle at a distance of one foot [9] . CRI describes the way objects appear under a given light source on a scale of 1 - 100. Low CRI light sources make objects illuminated by them appear unnatural and higher CRI light sources support a more natural appearance [10] . Color temperature (Kelvin) is defined as the measured temperature at which a black body emits light at a specific spectral distribution [11] . Low color temperature light sources make products illuminated by them appear warmer from the range of more yellow to red light emitted while higher color temperature sources appear colder from the blue to green light emitted from light bulbs.

For retailers, understanding how more energy efficient and economical light sources such as LEDs may favorably influence consumer opinion of products in retail environments is critical to top and bottom line financial performance. LED sources have higher efficacies to produce light than incandescent and fluorescent sources currently used by retailers to illuminate grocery stores. Environmental concerns and economic benefits are fueling the rapid growth and replacement of older lighting technologies. By 2020, according to the Energy Independence and Security Act [12] light bulbs are required to be 70% more efficient. Evolving technologies, such as LED bulbs, are more economical than incandescent bulbs when cost/lumen and lumens/watt are compared. Linking light bulbs to computers via network control for modified lighting effects, including packaging/label/light interactions, offers retailers the potential of A) Reducing operating costs, B) Educating consumers about key food safety concerns such as nutritional content, brand messages, and safe handling instructions, C) Improving the inventory turnover and sales revenues of targeted products. The potential of new-to-market network-controlled LED systems and packaging interactions have little empirical research related to consumer behavior and yet technology is increasingly more cost-effective for lighting retrofits for smaller food retailers. Cost-effective modifications to lighting systems used in combination with targeted packaging and labeling designs may offer several retailer benefits. Through optimal label and lighting designs, consumers could benefit in numerous ways including: profit optimization, brand selection, better nutritional choices, and greater attention to proper product handling instructions.

Much variation of in-store lighting is possible. Light bulb attributes may vary widely within and across grocery stores. New lighting systems, such as network-controlled LED variable bulbs need to be tested so that their appropriateness and influence on consumers may be revealed. Lighting system retrofits are substantial investments for stores, particularly in chain stores or within the fixed asset budget constraints of single location operations. A specific advantage of new-to-market network-controlled lighting systems is that they may be used to highlight specific products at the discretion of retail management, while not requiring high-cost lighting construction retrofits.

Packaging for the purpose of this study is described as the material which remains in constant contact with the meat products until it is removed for consumption. Packages serve many roles including: stabilizing, preserving, protecting, measuring, displaying and identifying retail products to consumers. The researchers propose that the packaging surrounding products influences attributions to the product within the package and differs from Underwood [16] who suggests that packaging is mutually exclusive to the ingredients. The appearance of products may interact with display lighting through reflection and absorption and reflection of visible light and the package. For the purposes of this study, white trays were used to maximize the reflective interaction of the LED light sources and the meat and label.

Labeling research has demonstrated that significant differences exist between label perceptions based on shopper socio-demographic factors [17] [18] . The role of colored label and lights effects among different groups of consumers is less clear. Optimal label and lighting designs with broad appeal among consumer groups is an important concern for the increasingly diverse U.S. grocery market. Labels using bold text and colored text, whole numbers, and calories are preferred by customers in general [19] . We wish to expand the research of consumer perceptions of label design variations more thoroughly by controlling for specific lighting interactions with targeted text design using colored labels [20] - [24] . Stimulus organism response (SOR) theory has been proposed as a means for measuring consumer attributions such as perceived brightness, usefulness, appeal, ease of understanding, information importance, concern for information, and need for information [25] [26] . The current researchers previously used SOR theory to explore consumer perceptions of ground beef packages [27] . A pilot study in 2013 with ground beef packaging found that (static) LED light sources (2800 K + 5000 K) influenced favorable packaging perceptions and purchase intentions compared to fluorescent (2700 K control) bulbs. Philip’s HUE consumer light bulbs and network control bridges offer researchers the opportunity to easily and quickly vary color temperature through a computer interface and network bridge. For this study, Kelvin color temperatures were varied from 2700 K (warm white) RED to 7000 K (cool white) BLUE to understand how consumers perceive the interaction of the lighting and label information.

3. Hypotheses

Color research has suggested that optimal background colors for meat departments are light blue or aqua with white meat trays and display fixtures to enhance the color of the meat while suggesting cleanliness and a cold (i.e. refrigerated/safe) environment [28] . Cool colors, i.e., blue, have been demonstrated to stimulate purchase intentions [29] . For purposes of this study, the label variations use a single variant of a red nutrition background (Label A) and blue nutrition background (Label B) in a novel label design to determine if consumers perceive the labels differently under the same control white LED light bulbs.

H1: Under the white light control, there will be no differences between label perceptions of: brightness, usefulness, appeal, ease of understanding, information importance, concern for information and need for information between the red and blue grounds of the nutrition portion of the label.

H2: Under red light, label variants with analogous harmonious colors in the nutrition panel (i.e. red, yellow, green-label B) will influence label design perceptions: brightness, usefulness, appeal, ease of understanding, information importance, concern for information and need for information.

H3: Under blue light, label variants with contrasting colors in the nutrition panel (i.e. red, yellow, green--label B) will influence label design perceptions: brightness, usefulness, and label appeal, ease of understanding, information importance, concern for information and need for information.

Beef and its color and appearance within standard Styrofoam deli packaging have been demonstrated to be the greatest factor in purchase behaviors [36] [37] . Product fit with the packaging design has been demonstrated with children who chose dark packaging for a dark chocolate candy bar and light packaging for a white chocolate candy; a statistically significant difference between the 1/3 of children who simply picked their favorite color to package the candy bar. Hershey has adopted the light/dark packaging scheme to simplify product selection for consumers [38] . Contrasting color label designs on meat packages may produce similar influences on consumers by adding product information cues interpreted differently than standard black and white meat labels.

Todorovic [39] suggests that the product, package, and its environment, including lighting, provide a unified experience for consumers considering alternatives. The researchers posit that consumers may select a steak according to the Gestalt of its presentation (i.e. display fixture color, package color, the product’s appearance and light source interaction within a complex system) influencing perception. For this reason, we measured effects of the lighting on consumer perceptions using stimulus-organism-response theory to test multiple meat label attributions simultaneously. Ampuero and Vila [40] found that high price/status orientation products require dark/ cold packaging such as black meat trays, utilitarian products require light/warm packaging and perceived safety was influenced by red packaging. Feelings about products, labels and packaging have been demonstrated to influence purchase intentions [41] . Similar results were found by Decre and Pras [42] in which warm color temperatures stimulated more positive reactions to retail environments and intention to buy compared to cooler color temperatures in simulated retail environments.

H4: Blue light will demonstrate a direct positive relationship to the white light control perceptions of label: brightness, usefulness, appeal, ease of understanding, information importance, concern for information and need for information.

H5: Red light will demonstrate a direct positive relationship to the control white light perceptions of label: brightness, usefulness, appeal, ease of understanding, information importance, concern for information and need for information.

H6: Red light will demonstrate a direct positive relationship to blue light perceptions of label: brightness, usefulness, appeal, ease of understanding, information importance, concern for information and need for information.

To create optimal lighting schemes for food labels based on existing store fixture infrastructure at retailers, we must better understand the differences between consumer perception of the food products based on labeling and lighting systems interactions.

4. Methods

This study was conducted at a large Midwestern university in Food and Agricultural Products Center (FAPC). The FAPC lab is a simulated grocery store environment including lighting and refrigerated display cases to provide our participants with a realistic meat department shopping experience. 156 subjects were recruited to participate in the study and received $20 financial compensation for their participation. Student participants were offered extra credit in the courses from which they are recruited. The characteristics of the sample are presented in Table 1.

Participants arrived at the food products lab, and completed paper informed consent documentation followed by a paper based pre-exposure survey including questions that assessed their label use when shopping. After completing the preliminary survey, participants we randomly assigned to one of the three experimental lighting conditions: red, white, or blue lighting. The Hue lights (3) illuminated the meat package labels in each color condition using gooseneck lamps presented 12 inches above the meat packages and attached to grocery store cases. Each lighting condition was isolated using opaque dividers to prevent cross-exposure between subjects. Mean light measurements from the surface of the meat package in LUX for the 7-day data collection period by lighting condition are presented in Table 2. The white light control package illuminance was approximately 1280 LUX. The red light package illuminance was approximately 583 LUX and the blue light package illuminance was 470 LUX. Illuminance variations were due to the targeted Kelvin ranges of 2800 to 7000 and limitations of the Hue bulbs. The label treatments were created using a Prima LX400 color label printer with reduced moisture labels to reduce ink bleeds from refrigerated case temperature variations (see Figure 1). Meat for the study and product packaging was purchased from a partnering meat department at a local grocery store. Upon

Table 1. Characteristics of the sample.

Figure 1. Meat package lighting and label interactions.

Table 2. Mean daily Lux readings.

arrival, participants completed informed consent documents, examined packages of meat, and completed a paper based survey with questions about the label stimuli prior to receiving participant incentives and exiting the lab.

5. Analysis

T-tests were utilized to test the hypotheses and theoretical assumptions in two phases followed by a repeated measures split plot ANOVA. A within and between subjects’ comparison tested the effect of the lighting treatments on consumer label perceptions. In the first analysis, within subject t-tests were used to compare label variants until the same lighting condition (red, blue, white) Figure 1. Significant differences were found in participant comparisons of package A and package B for the white light condition for brightness M = 2.96, SD = 1.02 and M = 4.47, SD = 0.749, t(52) = −9.52, p < 0.001, usefulness M = 4.13, SD = 0.708 and M = 4.51, SD = 0.541, t(52) = −4.18, p < 0.001, ease of understanding M = 4.28, SD = 0.904 and M = 4.55, SD = 0.695, t(52) = −2.94, p < 0.01, information importance M = 3.97, SD = 1.02 and M = 4.15, SD = 0.896, t(52) = −3.26, p < 0.01, and need for information M = 2.33, SD = 0.911 and M = 1.89, SD = 0.839, t(52) = 4.12, p < 0.001. Therefore, hypothesis 1 is not supported. This finding suggests that consumers may have reacted to the blue ground nutrition panel differently than the red ground nutrition panel which was varied in the control condition. This finding may support the findings of the effects of color contrasts on consumers [28] [29] , but require more research.

No significant differences were found in the red light condition indicating that analogous harmonies from the red light source and red label nutrition panel elements (i.e. red, yellow, green) did not influence consumer attention to label design variations. Hypothesis 2 is not supported. This finding suggests that under red light analogous harmonious colors presented in the serving information variations were not perceived differently than white fields in the nutrition panel. Red, green, yellow and orange colors under red light may be less effective for highlighting information on the nutrition label in favor of contrasting color label designs that differentiate product information for consumers through color contrasts or saturation effects to highlight product information.

The blue light treatment emphasized blue nutrition label background and red, yellow, green color contrasts (Table 2 and Table 3). Significant differences were found in the blue lighting condition for participant comparisons of package A and package B: brightness M = 3.13, SD = 1.26 and M = 4.55, SD = 0.567, t (52) = −7.87, p < 0.001, usefulness 4.26, SD = 6.55 and M = 4.49, t (52) = −3.26, p < 0.01 SD = 0.541, appeal M = 4.49, SD = 0.750 and M = 4.72, SD = 0.533, t (52) = −3.06, p < 0.01. Therefore, Hypothesis 3 is partially supported.

Next, the data was analyzed using independent samples t-tests to compare how participants evaluated label treatments (Labels A and B) under lighting treatment groups (Red, Blue, Control). Significant differences were found for package A between the blue and white lighting groups for appeal M = 3.47, SD = 0.97 and M = 3.41,

Table 3. Split plot repeated measures ANOVA comparing within subject’s effects by label variant and lighting treatment.

SD = 1.074, t (140) = 2.06, p < 05, indicating that package A under the white (control) light was more appealing. Significant differences were also found for ease of understanding between blue and white lighting conditions for package B, M = 4.72, SD = 0.533 and M = 4.43, SD = 0.797, t (140) = 2.15 p < 0.05. This finding indicates that package B was easier to understand under the blue lighting condition and was likely influenced by the contrasting colors on the nutrition label panel background panel which differed between Label A and Label B. This finding suggests that contrasting color elements in the label background of the nutrition facts panel may have made the label seem easier to understand. More research is needed to test the assumptions of effects of label color fields on consumer perception of label information. Therefore, hypothesis 4 is partially supported.

Comparisons of the red light condition to the white light control group were conducted and significant difference were found for package A in brightness M = 3.78, SD = 1.05 and M = 3.88, SD = 1.11, t (100) = 3.98, p < 0.001, usefulness M = 4.51, SD.649 and M = 4.51, SD = 0.649 t (100) = 2.80, p < 0.01, and appeal M = 3.86, SD = 0.913 and M = 4.04, SD .999, t (100) = 2.28 p < 0.05. These findings suggest that the label on package A under the red light was perceived as brighter, more useful, and appealing than the identical label under the control condition white light in spite of lower illuminance (1230 LUX vs 580 LUX). For package B significant differences were found between the red and white light conditions for perceived label brightness M = 2.96, SD = 1.02 and M = 4.47, SD = 0.749, t (100) = −3.19, p < 0.01, suggesting there were differences in how consumers perceived labels with analogous harmonious color interactions between red light and the red background color of the nutrition information panel compared to contrasting blue background nutritional label design. Therefore, hypothesis 5 is partially supported.

In the comparison of the blue and red lighting condition groups, significant differences were found for brightness for both packages A and B. Package A comparisons for perceived brightness M = 3.13, SD = 1.26 and M = 2.96, SD = 0.1.02 t (100) = −2.80, p < 0.01 suggest that participants considered the red lighting condition label was brighter than the blue lighting condition label. Similar results were found for Package A for label appeal under the red lighting condition M = 3.47, SD = 0.973 and M = 3.41, SD = 1.07, t (100) = −2.06, p < 0.05, suggesting that for package A, the red light and label content interaction was more appealing. For package B, a converse relationship was demonstrated for each lighting source M = 4.45, SD = 0.667 and M = 4.47, SD = 0.749, t(100) = 3.20, p < 0.01, suggesting that package B was perceived brighter, despite lower illuminance (580 vs. 470 LUX) under the blue lighting condition which may have been influenced the contrasting color fields in the background of nutrition facts panel compared to the analogous red color background panel present in package B. However, additional research is needed to verify this supposition. Similar results were found for package B in the concern for label information perceptions between the blue and red lighting conditions M = 4.47, SD = 0.772 and 4.15, SD = 0.886, t(100) = 2.51, p < 0.05, suggesting that participants were more concerned about the information presented under the blue lighting conditions for label B which contained a contrast red background nutrition facts panel. Therefore, hypothesis 6 is partially supported.

6. Conclusions

The purpose of this study was to examine the impact of new LED lighting systems on consumer perception of labels both within and between subject groups. Within subjects two label variants (A and B) were tested between subjects under different lighting conditions (white, red, and blue). Significant differences were found for brightness, usefulness, appeal, information importance, and need for information among the label variants. Red light produced no significant difference in the perceptions of the manipulated nutrition label design between labels A and B. However, subjects in the blue and white lighting conditions perceived the labels differently. Label B which included contrasting colors in the nutritional label field under blue light produced a positive effect on consumer perception of the label information. A similar effect was found for the blue nutrition field B under the white light condition, suggesting a consumer preference for the blue nutrition label background in general compared to the red background. This finding suggests that contrasting and analogous color may influence consumer perception of information conveyed within labels based on the display lighting design.

Between subject effects were also found when comparing label perceptions based on lighting conditions (white, red, and blue). Of particular note were the differences in perceived brightness within label designs A versus B for blue light versus red lighting conditions. Participants found label A brighter under red light and label B brighter under blue light, which suggested label elements’ interactions from contrasting colors introduced to label B under blue light produced measurable differences in consumer perception of the label. Under the control condition under which red and blue nutrition label backgrounds were compared, label B was perceived as offering additional information in spite of the only variability was the background color of the nutrition label. The use of blue display lighting in meat departments may influence consumer perceptions of food label elements through analogous and contrasting colored label elements and may be useful for differentiating meat products to shoppers. Packaging designers’ attention to the confluence of store lighting and packaging may provide a basis for product differentiation and revenue maximization in future store atmospherics and assortments. However, appearance of meat products in traditional deli packaging may not be enhanced under blue light for products such as beef steak and product appearance may more strongly influence purchase intentions than packaging designs. In enclosed packages such as cartons, the relationship of lighting design and label messages remain a key concern and highlight the need for additional research.

In addition to identifying label and lighting interaction effects found in this study, LED lights remain cool compared to thermal effects from older fluorescent and metal halide technologies while reducing energy costs. LED lighting systems with substantial color variability will increase in importance and use in retail store lighting designs in the future. Study of targeting LED lighting effects’ (e.g. red, green, blue) influence on consumer perception of retail products offers industry opportunities to improve health communications, safety concerns, or support other retailer marketing communications. However, this research area remains largely unexplored in the literature for the most important factor in human health, food products. This study provided some interesting preliminary evidence of effects from colored lights on label perceptions between and among consumers measuring a key source of information about food nutrition labels.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Rimal, A. (2005) Meat Labels: Consumer Attitude and Meat Consumption Pattern. International Journal of Consumer Studies, 29, 47-54.
http://dx.doi.org/10.1111/j.1470-6431.2005.00374.x
[2] Schauss, A.G. (1981) Application of Behavioral Photobiology to Human Aggression, Baker-Miller Pink. International Journal of Biosocial Research, 2, 1-9.
[3] Lichtlé, M.C. (2007) The Effect of an Advertisement’s Colour on Emotions Evoked by Attitude towards the Ad: The Moderating Role of the Optimal Stimulation Level. International Journal of Advertising, 26, 37-62.
[4] Labrecque, L.I., Patrick, V.M. and Milne, G.R. (2013) The Marketers’ Prismatic Palette: A Review of Color Research and Future Directions. Psychology & Marketing, 30, 187-202.
http://dx.doi.org/10.1002/mar.20597
[5] Labrecque, L.I. and Milne, G.R. (2012) Exciting Red and Competent Blue: The Importance of Color in Marketing. Journal of the Academy of Marketing Science, 40, 711-727.
http://dx.doi.org/10.1007/s11747-010-0245-y
[6] Becker, L., van Rompay, T.J., Schifferstein, H.N. and Galetzka, M. (2011) Tough Package, Strong Taste: The Influence of Packaging Design on Taste Impressions and Product Evaluations. Food Quality and Preference, 22, 17-23.
http://dx.doi.org/10.1016/j.foodqual.2010.06.007
[7] Wogalter, M.S., Conzola, V.C. and Smith-Jackson, T.L. (2002) Research-Based Guidelines for warning Design and Evaluation. Applied Ergonomics, 33, 219-230.
http://dx.doi.org/10.1016/S0003-6870(02)00009-1
[8] Lumen (n.d.) Dictionary.com Unabridged.
http://www.dictionary.com/browse/lumen
[9] Foot-Candle (n.d.) Dictionary.com Unabridged.
http://www.dictionary.com/browse/foot-candle
[10] Color Rendering Index. (n.d.) What Is Color Rending Index?
http://www.lrc.rpi.edu/programs/nlpip/lightinganswers/lightsources/whatisColorRenderingIndex.asp
[11] Kelvin (n.d.) The American Heritage® Science Dictionary.
http://www.dictionary.com/browse/kelvin
[12] United State Department of Energy (2009) Demonstration Assessment of Light-Emitting Diode (LED) Freezer Case Lighting.
http://apps1.eere.energy.gov/buildings/publications/pdfs/ssl/gateway_freezer-case.pdf
[13] Food Manufacturing Institute (2012) U.S. Grocery Shopper Trends.
http://www.icn-net.com/docs/12086_FMIN_Trends2012_v5.pdf
[14] Reicks, A.L., Brooks, J.C., Kelly, J.M., Kuecker, W.G., Boillot, K., Irion, R. and Miller, M.F. (2008) National Meat Case Study 2004: Product Labeling Information, Branding, and Packaging Trends. Journal of Animal Science, 86, 3593-3599.
http://dx.doi.org/10.2527/jas.2007-0680
[15] Beef Board (2014) Summary of Published Research on Consumer Beef Product Preference Rankings.
http://www.beefboard.org/search.asp?q=summary+of+published+research+on+
consumer+beef+product+preference+rankings&sa.x=14&sa.y=13&cof=FORID%3A11&cx=000951561
340430319383%3Aosws6nacbuw
[16] Underwood, R.L. and Klein, N.M. (2002) Packaging as Brand Communication: Effects of Product Pictures on Consumer Responses to the Package and Brand. Journal of Marketing, 10, 58-68.
http://dx.doi.org/10.1080/10696679.2002.11501926
[17] Nayga Jr., R.M. (1999) Toward an Understanding of Consumers’ Perceptions of Food Labels. The International Food and Agribusiness Management Review, 2, 29-45.
http://dx.doi.org/10.1016/S1096-7508(99)00011-7
[18] Drichoutis, A.C., Lazaridis, P. and Nayga, R.M. (2005) Nutrition Knowledge and Consumer Use of Nutritional Food Labels. European Review of Agricultural Economics, 32, 93-118.
http://dx.doi.org/10.1093/erae/jbi003
[19] Humphries, C. (1998) A Code of Practice for Food Labelling. Nutrition & Food Science, 98, 193-197.
http://dx.doi.org/10.1108/00346659810215307
[20] Wogalter, M.S., Forbes, R.M. and Barlow, T. (1993) Alternative Product Label Designs: Increasing the Surface Area and Print Size. Proceedings of Interface, 93, 181-186.
[21] Wogalter, M.S., Jarrard, S.W. and Simpson, S.N. (1994) Influence of Warning Label Signal Words on Perceived Hazard Level. Human Factors, 36, 547-556.
[22] Bzostek, J.A. and Wogalter, M.S. (1999) Measuring Visual Search Time for a Product Warning Label as a Function of Icon, Color, Column and Vertical Placement. Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Vol. 43, No. 16, SAGE Publications, Thousand Oaks, 888-892.
http://dx.doi.org/10.1177/154193129904301603
[23] McDougald, B.R. and Wogalter, M.S. (2013) Facilitating Pictorial Comprehension with Color Highlighting. Applied Ergonomics, 45, 1285-1290.
http://dx.doi.org/10.1016/j.apergo.2013.05.008
[24] Lesch, M.F., Powell, W.R., Horrey, W.J. and Wogalter, M.S. (2013) The Use of Contextual Cues to Improve Warning Symbol Comprehension: Making the Connection for Older Adults. Ergonomics, 56, 1264-1279.
http://dx.doi.org/10.1080/00140139.2013.802019
[25] Mehrabian, A. and Russell, J.A. (1974) The Basic Emotional Impact of Environments. Perceptual and Motor Skills, 38, 283-301.
http://dx.doi.org/10.2466/pms.1974.38.1.283
[26] Valdez, P. and Mehrabian, A. (1994) Effects of Color on Emotions. Journal of Experimental Psychology, 4, 394-409.
http://dx.doi.org/10.1037/0096-3445.123.4.394
[27] Clare, G., Hebert, P., Lee, H.J., Chung, L., Kang, M., Leong, J. and Slevitch, L. (2014) Seeing the Light: Consumer Perceptions of Ground Beef Packaging. Management, 4, 77-89.
[28] Mahnke, F.H. (1996) Color, Environment, and Human Response: An Interdisciplinary Understanding of Color and Its Use as a Beneficial Element in the Design of the Architectural Environment. Van Nostrand Reinhold, New York, 1-234.
[29] Babin, B.J., Hardesty, D.M., and Suter, T.A. (2003) Color and Shopping Intentions: The Intervening Effect of Price Fairness and Perceived Affect. Journal of Business Research, 56, 541-551.
http://dx.doi.org/10.1016/S0148-2963(01)00246-6
[30] Bellizzi, J.A., Crowley, A.E. and Hasty, R.W. (1983) The Effects of Color in Store Design. Journal of Retailing, 59, 21-45.
[31] Rebollar, R., Lidon, I., Serrano, A., Martin, J. and Fernandez, M.J. (2011) Influence of Chewing Gum Packaging Design on Consumer Expectation and Willingness to Buy. An Analysis of Functional, Sensory, and Experience Attributes. Food Quality and Preference, 24, 162-130.
http://dx.doi.org/10.1016/j.foodqual.2011.10.011
[32] Barbut, S. (2001) Effect of Illumination Source on the Appearance of Fresh Meat Cuts. Meat Science, 59, 187-191.
http://dx.doi.org/10.1016/S0309-1740(01)00069-9
[33] Barbut, S. (2004) Effect of Enhanced Fluorescent Light on Acceptability of Meat Cuts. Journal of Muscle Foods, 16, 77-86.
http://dx.doi.org/10.1111/j.1745-4573.2005.06603.x
[34] Singh, S. (2006) Impact of Color on Marketing. Management Decision, 44, 783-789.
http://dx.doi.org/10.1108/00251740610673332
[35] Mehta, R. and Zhu, R.J. (2009) Blue or Red? Exploring the Effect of Color on Cognitive Task Performances. Science, 323, 1226-1229.
http://dx.doi.org/10.1126/science.1169144
[36] Calkins, C.R., Goll, S.J. and Mandigo, R.W. (1986) Retail Display Lighting Type and Fresh Pork Color. Journal of Food Science, 51, 1141-1143.
http://dx.doi.org/10.1111/j.1365-2621.1986.tb13068.x
[37] Van Oekel, M.J., Warnants, N. and Bouque, C.H.V. (1999) Measurement and Prediction of Pork Color. Meat Science, 52, 347-354.
http://dx.doi.org/10.1016/S0309-1740(99)00012-1
[38] Gollety, M. and Guichard, N. (2011) The Dilemma of Flavor and Color in the Choice of Packaging by Children. Young Consumers, 12, 82-90.
http://dx.doi.org/10.1108/17473611111114803
[39] Todorovic, D. and Metzger, W. (2007) Laws of Seeing. Gestalt Theory, 28, 176-180.
[40] Ampuero, O. and Vila, N. (2006) Consumer Perceptions of Product Packaging. Journal of Consumer Marketing, 23, 100-112.
http://dx.doi.org/10.1108/07363760610655032
[41] Sadeghi, T. and Ghaemmaghami, K.T. (2011) The Correlation between Feelings and Brand Perception on Purchase Intention. World Applied Sciences Journal, 12, 697-705.
[42] Decre, G.B. and Pras, B. (2013) Simulating In-Store Lighting and Temperature with Visual Aids: Methodological Propositions and S-O-R Effects. The International Review of Retail, Distribution, and Consumer Research.
[43] Hebert, P., Clare, G., Chung, Y., Slevitch, L. and Leong, J. (2015) Effects of Experimental Conditions on Consumer Perceptions of Ground Beef: An Interdisciplinary Study. Journal of Social Sciences and Humanities, 1, 275-282.
[44] Marczyk, G.R., DeMatteo, D. and Festinger, D. (2005) Essentials of Research Design and Methodology. John Wiley & Sons, Hoboken.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.