Magnetic Nano Cobalt Ferrite Catalyzed Synthesis of 4H-Pyrano[3,2-h]quinoline Derivatives under Microwave Irradiation

Abstract

A microwave irradiated magnetically separable nano cobalt ferrite catalyzed green method for the synthesis of 4-phenyl-4H-pyrano[3,2-h]quinolin-2-amine and 2-amino-4-phenyl-4H-pyrano[3,2-h] quinoline-3-carbonitrile derivatives through cyclization of aromatic aldehyde, acetonitrile/malononitrile and 8-hydoxyquinoline is developed and presented in this paper. The cubic magnetic cobalt ferrite nano particles were synthesized by sol-gel citrate precursor method and characterized by FT-IR, XRD, SEM and TEM techniques and the structures of the synthesized pyranoquinoline derivatives were assigned by IR, MASS and 1H NMR techniques. The reaction is carried out in a domestic microwave oven with a heat-resistant microwave safe glass container with a lid.

Share and Cite:

Bandaru, S. , Majji, R. , Bassa, S. , Chilla, P. , Yellapragada, R. , Vasamsetty, S. , Jeldi, R. , Korupolu, R. and Sanasi, P. (2016) Magnetic Nano Cobalt Ferrite Catalyzed Synthesis of 4H-Pyrano[3,2-h]quinoline Derivatives under Microwave Irradiation. Green and Sustainable Chemistry, 6, 101-109. doi: 10.4236/gsc.2016.62009.

Received 1 April 2016; accepted 8 May 2016; published 11 May 2016

1. Introduction

Microwave irradiation is a powerful tool and efficient method for the synthesis of biological active compounds due to selective absorption of microwave energy by polar molecules [1] . The wide applications of microwave irradiation are to enhance the rate of the reaction and usage of non-conventional energy source for product synthesis [2] .

Most of the multicomponent reactions (MCRs) proceed through convergent reaction pathway, in which two or more starting materials react to form a single product in one-pot manner without any intermediate formation [3] . Multicomponent reactions play an important role in organic chemistry due to their excellent yields, ideal atom efficiency, convergence, exploratory power leading to the straight forward synthesis of some heterocyclic compounds [4] and also they have wide applications in combinatorial synthesis [5] - [7] . Pyranoquinolines are the important moieties in natural products [8] - [10] and these compounds have shown antimalarial [11] , HIV inhibitors [12] , pharmaceuticals [13] , antischistosomal agents [14] , antimicrobial [15] [16] and antitumor activity [17] .

According to literature survey, several methods have been reported for the synthesis of pyranoquinoline derivatives such as Lanthanide chloride [18] , Potassium fluoride-alumina [19] , Triethylamine [20] , Imino Diels- Alder reactions catalyzed by Antimony (III) sulfate [21] , Molten tetra-n-butylphosphonium bromide under solvent-free conditions [22] , Piperdine [23] , Iodine [24] , Phosphorous oxy chloride [25] , Ultrasound assisted green synthesis [26] , Sodium acetate [27] , Ethanol:pyridine (1:1) [13] , Egg shell [28] , Trifluoroborane-silica [29] , 1,4-diazabicyclo[2,2,2]octane [30] and Indium chloride [31] . Even though these methods have their own merits but some limitations are observed like longer reaction times [33] , usage of toxic reagents [23] and difficulty of separation of catalyst [20] . The main disadvantage of these procedures involves that the catalysts are destroyed during the course of the reaction and cannot be recovered [20] [23] - [25] [27] . Our progressing research on development and application of magnetic nano ferrite catalysts for organic transformations involve green procedures, short reaction time, low temperature reaction conditions, higher yields, easy separation of catalyst and economically desirable processes. Previously, synthesis, characterization and catalytic application of nano copper and cobalt ferrite catalysts was reported by us for the one-pot synthesis of 2,4,5,-trisubstitued imidazoles [36] , nano copper ferrite catalyzed one-pot synthesis of tri and tetra substituted imidazoles under ultrasonication [37] , microwave assisted nickel cobalt ferrite catalyzed one-pot synthesis of β-acetamido ketones [38] and nano copper ferrite catalyzed improved procedure for one-pot synthesis of poly substituted pyridine derivatives [39] .

Here we are reporting an efficient improved procedure for one-pot multi-component synthesis of 4H-pyrano [3,2-h]quinoline derivatives through aromatic aldehyde, malononitrile/acetonitrile and 8-hydroxyquinoline in presence of magnetically separable nano cobalt ferrite catalyst under microwave irradiation (Scheme 1).

2. Experimental

2.1. Chemicals and Apparatus

Chemicals used in this procedure are of AR grade without further purification. The calcined as-synthesized nano cobalt ferrite was characterized by XRD, SEM, FT-IR, BET and TEM. The XRD spectra were recorded on PANalytical-Xpertpro diffractometer and the average crystallite size was determined from the corresponding XRD data. The microstructural morphology was studied with a Scanning Electron Microscope (SEM) model JEOL-

Scheme 1. Synthesis of 4H-pyrano[3,2-h]quinoline derivatives catalyzed by nano CoFe2O4.

JSM 6610 LV. FTIR spectra were recorded on BRUKER ALPHA FT-IR with Opus 6.1 version. Specific surface area (SBET) of sample was determined by BET surface area analyzer (Nova 2000 series, Quanta chrome Instruments, UK). KORYO microwave oven (model-KMS1911) with a power output-700W and microwave frequency-2450 MHz was used. The synthesized pyranoquinoline derivatives were characterized by IR, MASS and 1H NMR. IR spectra recorded on a (Perkin Elmer Spectra-880) spectrophotometer by using KBr pellets in the region 400 - 4500 cm−1 and 1H NMR spectra was characterized by 400 MHz-(Bruker Avance) in CDCl3/ DMSO-d6 solvent and Mass spectra was recorded at 70 eV (MASPEC low resolution mass spectrometer).

2.2. Catalyst Preparation and Characterization

The nano cobalt ferrite has been synthesized by citrate precursor sol-gel method and characterized by FT-IR, SEM, TEM, XRD and particle size analysis as reported earlier by us [37] .

2.3. General Procedure for the Synthesis of 4H-Pyrano[3,2-h]quinoline Derivatives

About 0.5 g of the catalyst was taken and activated at 500˚C for 2 hours and cooled to room temperature before the experiment. Equimolar quantities of aromatic aldehyde (10 mmol), acetonitrile/malononitrile (10 mmol) and 8-hydoxyquinoline (10 mmol) were mixed together in a microwave dish and dissolved in 5 mL of ethanol and the catalyst added homogenised. The reaction mixture was irradiated in microwave oven in 2 minute intervals at Defrost mode (40% power output) as higher power levels of the microwave oven resulted in evaporation of the solvent and reactants even before the products are formed). The progress and completion of the reaction was monitored by TLC using mobile phase (n-Hexane:ethyl acetate 3:1), the formed product mixture was cooled to room temperature and ethyl alcohol added until the product was dissolved. The products were isolated by removing the catalyst magnetically from the reaction mixture and the formed products were characterized and compared by IR, 1H NMR and MASS spectral techniques (Table 1).

3. Results and Discussion

3.1. Catalytic Study

The procedure involves multi-component one pot cyclization reaction between aromatic aldehyde, acetonitrile/malononitrile and 8-hydoxyquinoline is described as a model reaction shown in Scheme 1. The feasibility of formation of pyranoquinoline derivatives and the reaction conditions are tabulated in Table 2.

3.1.1. Effect of Catalyst Loading on Synthesis of 4H-Pyrano[3,2-h]quinoline Derivatives

Investigation of the amount of catalyst loading was tested in this reaction procedure and the results are shown in Table 2. From this study, 500 mg of nano CoFe2O4 catalyst was sufficient to synthesize 92% isolated yields of pyranoquinoline derivatives (Entry 4, Table 2). From these experimental studies low concentration of catalyst is not enough to synthesize higher yields of pyranoquinoline derivatives (Entry 2, Table 2), while high concentration of nano CoFe2O4 catalyst loading did not produce considerable changes in the percentage of product yields (Entry 5, 6, Table 2). Hence, 500 mg of nano CoFe2O4 catalyst is sufficient to synthesize 4H-pyrano[3,2-h] quinoline derivatives.

3.1.2. Comparative Study of Nano Cobalt Ferrite Catalyst with Other Catalysts for the Synthesis of 4H-Pyrano[3,2-h]quinoline Derivatives

Reaction times for the formation of pyranoquinoline derivatives with various catalysts are presented in Table 3. It is observed that with other catalysts and particularly under reflux conditions the reactions times are very much higher. Under microwave conditions, synthesis of 4H-pyrano[3,2-h]uinoline derivatives catalyzed by InCl3 [32] has been reported with shorter reaction times, the present method offers a comparatively very low cost and easily producible nano cobalt ferrite for effective results.

3.1.3. Plausible Mechanism for the Synthesis of 4H-Pyrano[3,2-h]quinoline Derivatives Catalyzed by Nano CoFe2O4

Initially acetonitrile/malononitrile undergo deprotanation in the presence of Lewis base (O2−) of nano CoFe2O4

Table 1. Reactants and spectral data of pyranoquinoline derivatives.

Table 2. Effect of catalyst loading.

Table 3. Comparative study of nano CoFe2O4 catalyst with other catalysts.

catalyst to form carbanion which further react with aromatic aldehyde leads condensation reaction in the presence of Lewis acid (Fe3+) to form an intermediate arylidenemalononitrile (1-Knovenagel product). This intermediate undergo Michael addition with 8-hydroxyquinoline, leads to cyclization followed by rearrangement reaction produce 4H-pyrano[3,2-h]quinoline derivatives shown in Scheme 2.

4. Recycling of the Catalyst

Catalyst reusability is of major concern in heterogeneous catalysis. Catalyst recycling was achieved by fixing the catalyst magnetically at the bottom of the microwave dish with a strong Neodymium magnet, after which the solution containing the product was taken off with a pipette, the catalyst washed thrice with ethyl acetate, dried and the fresh reactants dissolved in ethyl alcohol was introduced into the microwave dish, followed by microwave irradiation, allowing the reaction to proceed for the next run. The catalyst was consecutively reused for five times without any noticeable loss of its catalytic activity.

5. Conclusion

In this present study, we report an efficient method for the synthesis of pyranoquinoline derivatives using nano cobalt ferrite as heterogeneous catalyst. This method has several advantages like improved yield of products, microwave assisted reaction, less reaction times, easy separation of the catalyst by strong Neodymium magnet, recyclability and reusability of the catalyst.

Scheme 2. Plausible mechanism for the synthesis of 4H-pyrano[3,2-h]quino- line derivatives catalyzed by nano CoFe2O4.

Acknowledgements

The authors wish to thank the UGC for the all the facilities received through the Major Research Project No. F. 41-371/2012 (SR) to Paul Douglas Sanasi, Satyanarayana Bassa, UGC-SRF to Swathi Bandaru and CSIR-SRF to Ravi Kumar Majji.

NOTES

*Corresponding author.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Gedye, R.N. and Wei, J.B. (1998) The Rapid Synthesis of Organic Compounds in Microwave Ovens. Canadian Journal of Chemistry, 76, 525-527.
Varma, R.S. (1999) Solvent-Free Organic Synthesis. Using Supported Reagents and Microwave Irradiation. Green Chemistry, 1, 43-55.
http://dx.doi.org/10.1039/a808223e
[2] Ravichandran, S. and Karthikeyan, E. (2011) Microwave Synthesis—A Potential Tool for Green Chemistry. International Journal of ChemTech Research, 3, 466-470.
[3] Domling, A. and Ugi, I. (2000) Multicomponent Reactions with Isocyanides. Angewandte Chemie International Edition, 39, 3168-3210.
http://dx.doi.org/10.1002/1521-3773(20000915)39:18<3168::AID-ANIE3168>3.0.CO;2-U
Ugi, I.K., Ebert, B. and Horl, W. (2001) Formation of 1,10-Iminodicarboxylic Acid Derivatives, 2,6-Diketo-piperazine and Dibenzodiazocine-2,6-dione by Variations of Multicomponent Reactions. Chemosphere, 43, 75-81.
http://dx.doi.org/10.1016/S0045-6535(00)00326-X
[4] Nair, V., Rajesh, C., Vinod, A.U., Bindu, S., Sreekanth, A.R., Mathen, J.S. and Balagopal, L. (2003) Strategies for Heterocyclic Construction via Novel Multicomponent Reactions Based on Isocyanides and Nucleophilic Carbenes. Accounts of Chemical Research, 36, 899-907.
[5] Zhu, J. and Beinayme, H. (2005) In Multicomponent Reactions. Wiley-VCH, Weinheim.
http://dx.doi.org/10.1002/3527605118
[6] Domling, A. (1998) High through Put Screen. Combinatorial Chemistry, 1, 1-22.
[7] Beinayme, H., Hulme, C., Oddon, G. and Schmitt, P. (2000) Maximising Synthetic Efficiency: Multy Component Transformations Lead the Why. Chemistry—A European Journal, 6, 3321-3329.
http://dx.doi.org/10.1002/1521-3765(20000915)6:18<3321::AID-CHEM3321>3.0.CO;2-A
[8] Chen, I.S., Tsai, I.W., Teng, C.M., Chen, J.J., Chang, Y.L., Ko, F.N., Lu, M.C. and Pezzuto, J.M. (1997) Pyranoquinoline Alkaloids from Zanthoxylum Simulans. Phytochemistry, 46, 525-529.
http://dx.doi.org/10.1016/S0031-9422(97)00280-X
[9] Wabo, H.K., Tane, P., Connolly, J.D., Okunji, C.C., Schuster, B.M. and Iwu, M.M. (2005) Tabouensinium Chloride, a Novel Quaternary Pyranoquinoline Alkaloids from Araliopsis tabouensis. Natural Product Research, 19, 591-595.
http://dx.doi.org/10.1080/14786410412331280078
[10] Michael, J.P. (2002) Quinoline, Quinazoline and Acridone Alkaloids. Natural Product Reports, 19,742-760.
http://dx.doi.org/10.1039/b104971m
Michael, J.P. (2003) Quinoline, Quinazoline and Acridone Alkaloids. Natural Product Report, 20, 476-493.
http://dx.doi.org/10.1039/b208140g
Micheal, J.P. (2004) Quinoline, Quinazoline and Acridone Alkaloids. Natural Product Report, 21, 650-668.
http://dx.doi.org/10.1039/b310691h
Micheal, J.P. (2005) Quinoline, Quinazoline and Acridone Alkaloids. Natural Product Report, 22, 627-646.
http://dx.doi.org/10.1039/b413750g
[11] Abdel-Wahab, B.F., Khidre, R.E., Farahat, A.A. and El-Ahl, A.S. (2012) 2-Chloroquinoline-3-aldehyde: Synthesis, Reactions and Applications. Arkivoc, 1, 211-276.
[12] Tois, J., Vahermo, M. and Koskinen, A. (2005) Novel and Convenient Synthesis of 4(1H) Quinolines. Tetrahedron Letter, 46, 735-737.
http://dx.doi.org/10.1016/j.tetlet.2004.12.046
[13] El-Taweel, F.M.A. (2011) Novel and Facile Synthesis of Thiophene, 2H-Pyran-2-one, Benzimidazol[1,2-a]pyridine and Pyridine Derivative. Phosphorus, Sulfur, and Silicon and the Related Elements, 179, 1276-1277.
[14] Abdelkhalik, M.M., Eltoukhy, A.M., Agamey, S.M. and Elnagdi, M.H. (2004) Enaminones as Building Blocks in Heterocyclic Synthesis of Nicotinic Acid: New Synthesis of Nicotinic Acid and Thienopyridine Derivatives. Journal of Heterocyclic Chemistry, 41, 431-435.
http://dx.doi.org/10.1002/jhet.5570410321
[15] E. Abd El-Rady, E. and El-Azab, I.H. (2012) Reactivity of β-Enamino Ester of Benzo[f] Chromene: One Pot Synthesis of Isolated Heterocyclic-Fused Derivatives of Benzo[f] Chromene. European Journal of Chemistry, 3, 81-86.
http://dx.doi.org/10.5155/eurjchem.3.1.81-86.507
[16] Mohamed, H.M., Abd El-Wahab, A.H.F., Ahmed, K.A., El-Agrody, A.M., Bedair, A.H., Eid, F.A. and Khafagy, M.M. (2012) Synthesis, Reactions and Antimicrobial Activities of 8-Ethoxycoumarin. Molecules, 17, 971-988.
http://dx.doi.org/10.3390/molecules17010971
[17] Ghorab, M.M. and Al-Said, M.S. (2012) Synthesis and Anti-Tumour Activity of Some Novel Hydrazide, 1,2-Dihy-dropyrdine, Chromene and Benzochromene Derivatives. Journal of Heterocyclic Chemistry, 49, 272-280.
http://dx.doi.org/10.1002/jhet.829
[18] Ma, Y., Qian., C.T., Xie, M.H. and Sun, J. (1999) Lanthanide Chloride Catalysed Imino Diels-Alder Reaction. One-Pot Synthesis of Pyrano[3,2-c] and Furo[3,2-c] Quinolines. The Journal of Organic Chemistry, 64, 6462-6467.
http://dx.doi.org/10.1021/jo982220p
[19] Wang, X.S., Zeng, Z.S., Shi, D.Q., Wei, X.Y. and Zong, Z.M. (2004) One-Pot Synthesis of 2-Amino-3-cyano-4-aryl-1, 4,5,6-tetrahydropyrano[3,2-c]quinoline-5-one Derivatives Using KF-Al2O3 as Catalyst. Synthetic Communications, 34, 3021-3027.
http://dx.doi.org/10.1081/SCC-200026662
[20] Igor, V.M., Madhuri, M., Marcia, A.O., Adriana, S.D., Snezna, R., Severine, V.S., Wim, F.A.S., Nikolai, M.E., Pavel, Y.U., Eerik M.E., et al. (2008) Structural Simplification of Bioactive Natural Products with Multicomponent Synthesis. 2. Antiproliferative and Antitubulin Activities of Pyrano[3,2-c]pyridines and Pyrano[3,2-c]quinolines. Journal of Medicinal Chemistry, 51, 2561-2570.
http://dx.doi.org/10.1021/jm701499n
[21] Goudara, M.A., Jayadevappab, H., Sudhakaraa, A. and Mahadevan, K.M. (2008) Imino Diels-Alder Reactions: Efficient Synthesis of Pyrano and Furanoquinolines Catalyzed by Antimony (III) Sulfate. Letters in Organic Chemistry, 5, 628-632.
http://dx.doi.org/10.2174/157017808786857462
[22] Salehi, J., Veisi, H., Khodaei, M.M. and Khosropour, A.R. (2011) One-Pot Synthesis of Pyrano and Furanoquinolines Catalyzed by Molten Tetra-n-Butylphosphonium Bromide under Solvent-Free Conditions. Journal of Heterocyclic Chemistry, 48, 484-488.
http://dx.doi.org/10.1002/jhet.583
[23] El-Agrody, A.M. and Al-Ghamdi, A.M. (2011) Synthesis of Certain Novel 4H-Pyrano[3,2-h]quinoline Derivatives. ARKIVOC, 2011, 134-146.
[24] Wang, W., Li, Y.-L. and Wang, X.-S. (2012) Highly Efficient Synthesis of 7-Aryl-Pyrano[3,4-c]pyrazolo[4,3-f]quinoline Derivatives Catalyzed by Iodine. ARKIVOC, 2012, 214-221.
[25] Ibrahim, M.A. and Hassanin, H.M. (2013) Hetero Annulated Pyrano Quinoline Diones: Part 1. An Efficient and Convenient Synthesis of the Novel Hetero Annulated Pyrano[3,2-c]quinoline-2,5(6H)-diones. ARKIVOC, 2013, 217-226.
[26] Gholizadeh, S. and Radmoghadam, K. (2013) Ultrasound-Assisted Three-Component Synthesis of Spiro[4H-pyrano[3, 2-c]quinolin-4,3’-indoline]-2’,5(6H)-diones in Water. Oriental Journal of Chemistry, 29, 1637-1641.
[27] Magdy, A.I., Hany, M.H., Yassin, A.A.G. and Youssef, A.S.A. (2010) Novel Heterocyclic Derivatives of Pyrano[3,2-c]quinolinone from 3-(1-Ethy1-4-hydroxy-2-oxo-2(1H)-quinolin-3-yl)-3-oxopropanoic Acid. European Journal of Chemistry, 1, 195-199.
http://dx.doi.org/10.5155/eurjchem.1.3.195-199.91
[28] Youseftabar-Miri, L., Akbari, F. and Ghraghsahar, F. (2014) Eggshell: A Green and Efficient Heterogeneous Catalyst for the Synthesis of Pyrano[3,2-c]Quinoline Derivatives. Iranian Journal of Catalysis, 4, 85-89.
[29] Akbari, A. and Azami-Sardooei, Z. (2014) Simple Method for the Synthesis and Antibacterial Activity of 2-Amino-3-cyano-1,4,5,6-tetrahydropyrano[3,2-c]quinolin-5-one Derivatives. Bulgarian Chemical Communications, 46, 757-763.
[30] Jadhav, S., Patil, R., Kumbhar, D., Patravale, A., Chandam, D. and Deshmukha, M. (2015) DABCO Promoted One Pot Efficient Synthesis and Antioxidant Activity of 2-Amino-4-phenyl-5-oxo-5,6dihydro-4H-pyrano[3,2-c]quinoline-3-carbonitrile Derivatives. International Journal of Pharmaceutical Sciences Review and Research, 35, 75-82.
[31] Senthil Kumar, G., Zeller, M., Frasso, M.A. and Rajendra Prasada, K.J. (2014) InCl3 Promoted Synthesis of Pyrano [3,2-h]quinolines via Microwave Irradiation. Journal of Heterocyclic Chemistry.
[32] Romdhane, A. and Ben Jannet, H. (2013) Synthesis of New Pyran and Pyranoquinoline Derivatives. Arabian Journal of Chemistry.
[33] Yao, M.-J., Guan, Z. and He, Y.-H. (2013) Simple, Catalyst-Free, One-Pot Procedure for the Synthesis of 2-Amino-3-cyano-1,4,5,6-tetrahydropyrano[3,2-c]quinoline-5-one Derivatives. Synthetic Communications, 43, 2073-2078.
http://dx.doi.org/10.1080/00397911.2012.686647
[34] Al-Bogami, A.S., Saleh, T.S. and Zayed, E.M. (2013) Divergent Reaction Pathways for One-Pot, Three-Component Synthesis of Novel 4H-Pyrano[3,2-h]quinolines under Ultrasound Irradiation. Ultrasonic Sonochemistry, 20, 1194-1202.
http://dx.doi.org/10.1016/j.ultsonch.2013.03.003
[35] Zhu, S.L., Wang, J., Xu, Z. and Li, J. (2012) An Efficient One-Pot Synthesis of Pyrano[3,2-c]quinolin-2,5-dione Derivatives Catalysed by L-Proline. Molecules, 17, 13856-13863.
http://dx.doi.org/10.3390/molecules171213856
[36] Sanasi, P.D., Santhipriya, D., Ramesh, Y., Ravi Kumar, M., Swathi, B. and Jaya Rao, K. (2014) Nano Copper and Cobalt Ferrites as Heterogeneous Catalyst for the One-Pot Synthesis of 2,4,5-Tri Substituted Imidazoles. Journal of Chemical Sciences, 126, 1715-1720.
http://dx.doi.org/10.1007/s12039-014-0729-2
[37] Sanasi, P.D., Majji, R.K., Bandaru, S., Bassa, S., Pinninti, S., Vasamsetty, S. and Korupolu, R.B. (2016) Nano Copper Ferrite Catalyzed Sonochemical, One-Pot Three and Four Component Synthesis of Poly Substituted Imidazoles. Modern Research in Catalysis, 5, 31-44.
http://dx.doi.org/10.4236/mrc.2016.51004
[38] Sanasi, P.D., Chilla, P.N., Ramesh, Y., Satyanarayana, B., Majji, R.K., Bandaru, S., Jeldi, R.K. and Vasamsetty, S. (2015) Microwave Assisted Nickel Cobalt Ferrite Catalyzed One-Pot Synthesis of β-Acetamido Ketones. International Journal of Engineering Science and Technology, 7, 418-425.
[39] Sanasi, P.D., Bandaru, S., Majji, R.K., Ramesh, Y., Jaya Rao, K., Satyanarayana, B. and Chilla, P.N. (2016) Nano Copper Ferrite Catalyzed Improved Procedure for One-Pot Synthesis of Poly Substituted Pyridine Derivatives. Chemical Science Transactions, 5, 325-334.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.