Share This Article:

Study on the Properties of UHMW-PE Film

Abstract Full-Text HTML XML Download Download as PDF (Size:1983KB) PP. 337-343
DOI: 10.4236/ampc.2015.58033    3,673 Downloads   4,280 Views   Citations

ABSTRACT

Some physicochemical properties of UHMW-PE film such as gas permeability, tensile strength, and corrosion resistance in acid with different immersion time, various concentrations and various solutions and rattler testing were studied. The obtained results showed that the values of gas permeability, tensile strength, elongation at break, and the temperature of dissociation at weight loss 5% was 546.57 cm3·m﹣2·24 h·0.1 MPa, 37.22 MPa, 368.00%, 360°C, respectively. In different concentration acid, the surface resistance of film accumulated to some extent with immersion time increasing, together with that the higher acid concentration was, the lower the surface resistance of film was. Moreover, the contact angle of films gradually increased with the acid concentration decreasing and the increase of immersion time. After wear testing, the mass of UHMW-PE film did not nearly change, while the contact angle became larger with the number of turning increasing and the value was more than 90°.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Du, Z. , Wang, J. , Wen, S. , Wang, P. , Zhang, D. and Yin, C. (2015) Study on the Properties of UHMW-PE Film. Advances in Materials Physics and Chemistry, 5, 337-343. doi: 10.4236/ampc.2015.58033.

References

[1] Kozakiewicz, M., Elgalal, M., Walkowiak, B. and Stefanczyk, L. (2013) Technical Concept of Patient-Specific, Ultrahigh Molecular Weight Polyethylene Orbital Wall Implant. Journal of Cranio-Maxillofacial Surgery, 41, 282-290.
http://dx.doi.org/10.1016/j.jcms.2012.10.007
[2] Chen, Y.F., Qi, Y.Y., Tai, Z.X., Yan, X.B., Zhu, F.L. and Xue, Q.J. (2012) Preparation, Mechanical Properties and Biocompatibility of Graphene Oxide/Ultrahigh Molecular Weight Polyethylene Composites. European Polymer Journal, 48, 1026-1033.
http://dx.doi.org/10.1016/j.eurpolymj.2012.03.011
[3] Petrican, M., Duscher, B., Koch, T. and Archodoulaki, V.M. (2015) Tribological Investigations on Virgin and Accelerated Aged PE-UHMW. Tribology International, 87, 151-159.
http://dx.doi.org/10.1016/j.triboint.2015.02.024
[4] Nguyen, L.H., Ryan, S., Cimpoeru, S.J., Mouritz, A.P. and Orifici, A.C. (2015) The Effect of Target Thickness on the Ballistic Performance of Ultra High Molecular Weight Polyethylene Composite. International Journal of Impact Engineering, 75, 174-183.
http://dx.doi.org/10.1016/j.ijimpeng.2014.07.008
[5] Guedes, R.M., Pereira, C.M., Fonseca, C.A. and Oliveira, M.S.A. (2013) The Effect of Carbon Nanotubes on Viscoelastic Behaviour of Biomedical Grade Ultra-High Molecular Weight Polyethylene. Composite Structures, 105, 263-268.
http://dx.doi.org/10.1016/j.compstruct.2013.05.027
[6] Huang, Y.F., Xu, J.Z., Li, J.S., He, B.X., Xu, L. and Li, M.Z. (2014) Mechanical Properties and Biocompatibility of Melt Processed, Self-Reinforced Ultrahigh Molecular Weight Polyethylene. Biomaterials, 35, 6687-6697.
http://dx.doi.org/10.1016/j.biomaterials.2014.04.077
[7] Zheng, Z., Huang, X.C., Li, Y., Yang, N.C, Wang, X.L. and Shi, M.W. (2012) Influence Factors of Internal Structure and Interfacial Compatibility of UHMWPE Fiber/SEBS Resin Composites: Processing Parameters, Structure of Fiber and Nature of Resin. Composites Part B, 43, 1538-1544.
http://dx.doi.org/10.1016/j.compositesb.2011.11.011
[8] Zhang, W., Hu, Z.S., Zhang, Y.A., Lu, C.H. and Deng, Y.L. (2013) Gel-Spun Fibers from Magnesium Hydroxide Nanoparticles and UHMWPE Nanocomposite: The Physical and Flammability Properties. Composites Part B, 51, 276-281.
http://dx.doi.org/10.1016/j.compositesb.2013.03.014
[9] Collins, M.N., Dalton, E., Schaller, B., Leahy, J.J. and Colin, B. (2012) Crystal Morphology of Strained Ultra High Molecular Weight Polyethylenes. Polymer Testing, 31, 629-637.
http://dx.doi.org/10.1016/j.polymertesting.2012.03.009
[10] Senatov, F.S., Gorshenkov, M.V., Tcherdyntsev, V.V., Kaloshkin, S.D. and Sudarchikov, V.A. (2015) Fractographic Analysis of Composites Based on Ultra High Molecular Weight Polyethylene. Tribology International, 87, 151-159.
http://dx.doi.org/10.1016/j.compositesb.2013.08.083
[11] Wen, S.G., Shen, Y., Wang, J.H., Liu, H.B., Xu, Q. and Song, S.G. (2011) Surface Modification of the UHMW-PE Film Processing by Hot Compression Molding. Advanced Materials Research, 239, 703-706.
http://dx.doi.org/10.4028/www.scientific.net/AMR.239-242.703

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.