Uniaxial Modelling of Behavior of the Concrete in Fast Dynamics: Approach to Seismic Behavior

DOI: 10.4236/eng.2011.36066   PDF   HTML     4,613 Downloads   8,780 Views  


The advantages of the computer enable us to simulate of complex structures subjected to dynamic loading. To come up to the necessity to know the real behavior of such material, we exploit these advantages basing on experimental data available in the literature. Since the response of the material depends on stress velocity, so it is essential to provide a computational code with dynamic behavior. To perform such simulations, we have elaborated a behavior law governed by loading velocity effect on concrete and their attitudes cyclic non elastic, for an approach of seismic behavior. This paper shows the processes we have followed to formulate this viscous damage law whose aim is behavior prediction for concrete under dynamic stresses. Then, the model is validated with experimental results and simulations of some available tests on Hopkinson’s bar.

Share and Cite:

A. Baraka, M. Benmansour, Y. Abdelaziz and F. Djeddi, "Uniaxial Modelling of Behavior of the Concrete in Fast Dynamics: Approach to Seismic Behavior," Engineering, Vol. 3 No. 6, 2011, pp. 561-568. doi: 10.4236/eng.2011.36066.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] H. Reinhard, “Influence of Stress-Rate and Strain-Rate on Me-chanical Properties of Concrete,” CEB GTC, 14 Impact and Impulsive Loading of Concrete Structures, 1985.
[2] P. Bishoff and S. Perry, “Compressive Behaviour of Concrete at High Strain Rates,” Materials and Structures, Vol. 24, No. 6, 1991, pp. 425-450. doi:10.1007/BF02472016
[3] C. Denoual, “Probabilistic Ap-proach of the Impact Behavior of Silicon Carbide: Application to Shielding Means,” Thesis, Ecole Normale superieure, Ca-chan, France, 1998.
[4] A. Brara, “Experimental Study of the Dynamic Tension of Concrete by Spalling Thesis,” University of Metz, Metz, 1999.
[5] F. Camborde and C. Mariotti, “Study of Dynamic Behavior of Brittle Materials by Discrete Elements,” 14 Congress of Mechanics Toulouse, France, 1999.
[6] C. Laborderie, “Phenomena in Unilateral Material Damaged Modeling and Application to the Analysis of Con-crete Structures,” Thesis, University of Paris VI, France, 1991.
[7] M. Benmansour, “Modeling the Behavior of Cyclic Alternating BA under Various Static Tests of Poles,” Thesis, ENPC Ecole, Paris, France, 1997.
[8] J. F. Dubé, “Simplified Model Behavior and Visco-Da- maged Concrete Structures,” Thesis, Ecole Normale superieure, Cachan,France,1994.
[9] P. Perzyna, “Fundamental Problems in Viscoplasticity,” Advances in Applied Mechanics, 1966, Vol. 9, pp. 935- 950.
[10] J. C. Simo, T. Hughes, “Computational Inelasticity-In- terdiscipli-nary Applied Mathematics,” Springer-Verlag, New York, 1998.
[11] F. Gatuingt, “Predicting Fracture of Concrete Structures Sought in Fast Dynamic,” Thesis, Ecole Normale superieure, Cachan, France, 1999.
[12] A. Winnicki, C. J. Pearce and N. Bicanic, “Viscoplastic Hoffman Consistency Model for Concrete,” Computers & Structures, Vol. 79, No. 1, 2001, pp. 7-19. doi:10.1016/S0045-7949(00)00110-3
[13] C. Laborderie, “Strategies and Models for Calculations Concrete Structures,” Thesis, University of Pau, Paris, France, 2003.
[14] F. Barpi, “Impact Behavior of Concrete: Computational Approach,” Engineering Fracture Mechanics, Vol. 71, No. 15, 2004, pp. 2197-2213. doi:10.1016/j.engfracmech.2003.11.007
[15] A. Baraka, “Contribution to the Modeling of Cyclic Behavior of Concrete Alternate with the Damage Mechanics,” Thesis, University of Sciences and of Technology, Oran, Algeria, 2002.
[16] CEB-FIP, “CEB-FIP Model Code 1990,” Trowbridge, Wiltshire, UK, 1993.
[17] G. Gary, “Tests at High Speed on Concrete,” Specific problems GRECO Pub-lisher, Paris, 1990.
[18] D. Cotsovos, “Numerical Investigation of Structural Concrete under Dynamic (Earthquake and Impact) Loading,” Thesis, University of London, London, 2004.
[19] F. Toutlemonde, “Impact Resistance of Concrete Structures, the Behavior of the Material Costing,” Thesis, ENPC Ecole, Paris, France, 1995.
[20] F. Toutlemonde, J. Sercombe, J-M. Tor-renti and R. Adeline, “Development of a Container for the Storage of Nuclear Waste: Impact Resistance,” Edition Hermès, Revue fran?aise de génie civil, Vol. 3, 1999, pp. 729-756.
[21] T. D. Ngo, P.A. Mendis, D. Teo and G. Kusuma, “Behavior of High-Strength Concrete Columns Subjected to Blast Loading,” University of Melbourne, Melbourne, 2002.
[22] J. Mazars, “Recent Developments in Search for Models ‘Comprehensive’ Models ‘Simplified’ for Reinforced Concrete Structures under Severe Stress,” Numerical modeling and Engineering of Construction, Paris, 2005.
[23] A. Brara and J. R Klepaczko “New Experimental Study of Rupture of Concrete Spalling,” Communication Congress GEO, France, 1997.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.