Application of FVM Analysis for Elastic Characteristics on Cutting Process of a Composited Coating Iron

Jaegwi Go¹, Je-Hyun Lee²

¹Department of Mathematics, Changwon National University, Changwon, Korea.
²School of Nano and Advanced Materials Engineering, Changwon National University, Changwon, Korea.

DOI: 10.4236/am.2014.518274                

Abstract

A composite material as a work piece is taken into account to investigate the elastic characteristics displaying during the cutting process. The magnitude of the elastic behaviors such as displacements and stresses reacts sensitively to the cutting angle and the vertical force increase, and the magnitude increases along the increments of the cutting angle and the vertical force increase. The buffering mechanism at the bond coat is described well by the fluctuation phenomenon for the horizontal displacement distribution profiles at the substrate. The variation of cutting angle under high vertical force yields profound influence on the behaviors of the longitudinal stress and the shear stress.

Keywords

Composite Material, Cutting Angle, Finite Volume Method, Thermoelastic Characteristics, Vertical Force

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Davim, J.P. (2010) Surface Integrity in Machining. Springer, London. http://dx.doi.org/10.1007/978-1-84882-874-2
[2]	Denkena, B., Köhler, J. and Mengesha, M.S. (2012) Influence of the Cutting Edge Rounding on the Chip Formation Process: Part 1. Investigation of Material Flow, Process Forces, and Cutting Temperature. Production Engineering, 6, 329-338. http://dx.doi.org/10.1007/s11740-012-0366-x
[3]	Hosseinkhani, K. and Ng, E. (2013) Analysis of the Cutting Mechanics under the Influence of Worn Tool Geometry. Procedia CIRP., 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), 8, 117-122.
[4]	Rodríguez, J., Arrazola, P., Cante, J., Kortabarria, A. and Oliver, J. (2013) A Sensibility Analysis to Geometric and Cutting Conditions Using the Particle Finite Element Method (PFEM). Procedia CIRP., 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), 8, 105-110.
[5]	de Agustina, B., Bernal, C., Camacho, A.M. and Rubio, E.M. (2013) Experimental Analysis of the Cutting Forces Obtained in Dry Turning Processes of UNS A97075 Aluminium Alloys. Procedia Engineering, 63, 694-699. http://dx.doi.org/10.1016/j.proeng.2013.08.248
[6]	Wallbank, J. (1979) Structure of Built-Up Edge Formed in Metal Cutting. Metals Technology, 6, 143-153. http://dx.doi.org/10.1179/030716979803276426
[7]	Kümmel, J., Gibmeier, J., Müller, E., Schneider, R., Schulze, V. and Wanner, A. (2014) Detailed Analysis of Microstructure of Intentionally Formed Built-Up Edges for Improving Wear Behaviour in Dry Metal Cutting Process of Steel. Wear, 311, 21-30.
[8]	Kim, S., Go, J., Jung, Y.-G. and Paik, U. (2011) Numerical Approach to Microstructural Characterizations for Dense and Porous Thermal Barrier Coatings. Journal of the Korean Society for Industrial and Applied Mathematics, 15, 223- 231.