Depth Sensing Indentation of Oxidized Plasma Sprayed CoNiCrAlY Coatings ()
Abstract
The aim of the present work is to analyze the evolution of microstructural and mechanical properties of Air Plasma Sprayed (APS) CoNiCrAlY coatings after early stage high-temperature oxidation. Phase analysis and oxide scale characterization were performed by using X-Ray Diffraction (XRD). The microstructural features of CoNiCrAlY coat- ings were analyzed by Scanning Electron Microscopy (SEM), while Nanoindentation (NI) technique was employed to study the evolution of the mechanical properties.
Share and Cite:
M. Alfano, G. Girolamo, L. Pagnotta, J. Zekonyte and R. Wood, "Depth Sensing Indentation of Oxidized Plasma Sprayed CoNiCrAlY Coatings,"
Soft Nanoscience Letters, Vol. 1 No. 2, 2011, pp. 51-53. doi:
10.4236/snl.2011.12009.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
M.P. Taylor, “An Oxidation Study of an MCrAlY Overlay Coating,” Materials at High Temperature, Vol. 22,2005, pp.433-436. doi:10.3184/096034005782744173
|
|
[2]
|
S. Saeidi, K.T. Voisey and D. G. McCartney, “The Effect of Heat Treatment on the Oxidation Behavior of HVOF and VPS CoNiCrAlY Coatings,” Journal of Thermal Spray Technology, Vol. 18, No. 2, 2009, pp. 209-216.
doi:10.1007/s11666-009-9311-8
|
|
[3]
|
G. Di Girolamo, M. Alfano, L. Pagnotta, J. Zekonyte and R. J. K.Wood, “Microstructure and Mechanical Properties of APS CoNiCrAlY Coatings after Early Stage Isothermal Oxidation,” submitted for publication.
|
|
[4]
|
M. Alfano, G. Di Girolamo, L. Pagnotta, D. Sun, J. Zekonyte and R. J. K. Wood, “The Influence of High Temperature Sintering on Microstructure and Mechanical Properties of Free Standing APS CeO2-Y2O3-ZrO2 Coatings,” Journal of Materials Science, Vol. 45, No. 10, 2010, pp. 2662-2669. doi:10.1007/s10853-010-4245-6
|
|
[5]
|
J. Y. Kwon, J. H. Lee, Y. G. Jung and U. Paik, “Effect of Bond Coat Nature and Thickness on Mechanical Properties and Contact Damage of Zirconia Based Tthermal Barrier Coatings,” Surface and Coatings Technology, Vol. 201, No. 6, 2006, pp. 3483-3490.
doi:10.1016/j.surfcoat.2006.07.240
|