Share This Article:

On Designing of the Main Elements of a Hybrid-Electric Vehicle Driving System

Abstract Full-Text HTML Download Download as PDF (Size:323KB) PP. 103-112
DOI: 10.4236/jpee.2014.24016    2,805 Downloads   3,611 Views  

ABSTRACT

The paper deals with the designing of an electric drive system used for hybrid electric vehicles. The driving system is realized with an induction motor and a voltage source inverter. Specifically, the application is for a series hybrid vehicle powered by electric storage batteries charged by solar batteries. In the first part of the paper the designing of the electric storage batteries and of the photoelectric system is presented. In the second part of the paper some aspects regarding the designing of the induction motor are presented. Then some aspects concerning the voltage source inverter designing are exposed.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Nicolae, P. , Nicolae, I. and Smărăndescu, I. (2014) On Designing of the Main Elements of a Hybrid-Electric Vehicle Driving System. Journal of Power and Energy Engineering, 2, 103-112. doi: 10.4236/jpee.2014.24016.

References

[1] EIA (2012) Short Term Energy Outlook March 2012. U.S. Energy Information Administration.
[2] IEA (2010) World Energy Outlook 2010. International Energy Agency, Paris.
[3] Klass, L.D. (1998) Biomass for Renewable Energy, Fuels and Chemicals. Elsevier Inc., Philadelphia.
[4] BP (2011) BP Statistical Review of World Energy June 2011.
[5] IEA (2011) Key World Energy Statistcs 2011. International Energy Agency, Paris.
[6] Brown, S., Pykea, D. and Steenhof, P. (2010) Electric Vehicles: The Role and Importance of Standards in an Emerging Market. Energy Policy, 38, 3797-3806. http://dx.doi.org/10.1016/j.enpol.2010.02.059
[7] Woods, L.R. and Lawrance, K.L. (2013) U.S. Department of Energy—Energy Efficiency and Renewable Energy. http://www1.eere.energy.gov
[8] Hori, Y. (2004) Future Vehicle Driven by Electricity and Control-Research on Four-Wheel-Motored UOT Electric March II. IEEE Transactions on Industrial Electronics, 51, 954-962. http://dx.doi.org/10.1109/TIE.2004.834944
[9] Chan, C. (2002) The State of the Art of Electric and Hybrid Electric. Proceedings of the IEEE, 90.
[10] Naito, S., Mutoh, N., Takagi, T. and Kouchi, Y. (1995) AC Drive Systems for Electric Vehicles. Hitachi Review, 77.
[11] Yamamura, H., Masaki, R., Koizumi, O., Naoi, K. and Naito, S. (1992) Development of Powertrain System for Nissan FEV. Proceedings of the 11th Electric Vehicle Symposium, Florence.
[12] Katrasnik, T. (2007) Hybridization of Powertrain and Downsizing of IC Engine—A Way to Reduce Fuel Consumption and Pollutant Emissions—Part 1. Energy Conversion and Management, 48, 1411-1423. http://dx.doi.org/10.1016/j.enconman.2006.12.004
[13] Clondescu, Gh. and Tomuta, O.D. (1977) Electric Accumulators, Maintenance and Repair (Acumulatoare Electrice, Intretinere si Reparare In Romanian). Universitatea Tehnica de Constructii Bucuresti.
[14] Corrigan, D., Menjak, I. and Dhar, S. (2000) Nickel-Metal Hydride Batteries for ZEV-Range Hybrid Electric Vehicle. PNGV Future Truck Technical Report, University of California.
[15] Noreus, D. (2000) Substitution of Rechargeable NiCd Batteries, a Background Document to Evaluate the Possibilities of Finding Alternatives to NiCd Batteries. Arrhenius Laboratory, Stockholm University.
[16] Campeanu, A., Vlad, I. and Enache, S. (2011) Aided Design of Electrical Machines (Proiectarea Asistata a Masinilor Electrice In Romanian). Universitaria, Craiova.
[17] Buja, G., Casadei, D. and Serra, G. (1998) Direct Stator Flux and Torque Control of an Induction Motor: Theorethical Analysis and Experimental Results. Conference of IEEE Industrial Electronics Society, IECON'98, 50-64.
[18] Choi, B. (2007) Analysis of Input Filter Interactions in Switching Power Converters. IEEE Transactions On Power Electronics, 22, 452-460. http://dx.doi.org/10.1109/TPEL.2006.889925
[19] http://www.semikron.com/
[20] http://www.semikron.com/products/data/cur/assets/SKM900GA12E4_22892130.pdf
[21] Pou, J., Osorno, D., Zaragoza, J., Ceballos, S. and Jaen, C. (2011) Power Losses Calculation Methodology to Evaluate Inverter Efficiency in Electrical Vehicles. Proceedings of the 7th International Conference opn Workshop Compatibility and Power Electronics, CPE, Article No. 5942269, 404-409.
[22] http://iota.ee.tuiasi.ro

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.