Share This Article:

Effect of 45S5 Bio-Glass Particles on Physical Properties and Corrosion Resistance of the Mg-5Zn Matrix Composite

DOI: 10.4236/ojmetal.2014.41001    3,975 Downloads   6,124 Views   Citations

ABSTRACT

The effect of bio-glass (45S5) addition on the physical properties of Mg-5Zn matrix composite has been investigated. Powder metallurgy method was used to fabricate the composite by mixing, compacting and followed by sintering. Mg-5 wt% Zn was reinforced with 5, 10, 15, 20, 25, and 30 wt% of bio-glass (BG). The physical properties such as density and porosity were determined using a pcynometer. Corrosion resistance was studied by immersion test. The results showed that porosity of the sintered sample decreased for the Mg-5 wt% Zn reinforced with 5 wt% of bio-glass. However, above 5 wt% of bio-glass, the porosity increased. The result also showed that corrosion resistance of Mg-5 wt% Zn increased as the amount of bio-glass increased.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Zaludin, M. , Jamaludin, S. , Idris, M. and Llah, N. (2014) Effect of 45S5 Bio-Glass Particles on Physical Properties and Corrosion Resistance of the Mg-5Zn Matrix Composite. Open Journal of Metal, 4, 1-8. doi: 10.4236/ojmetal.2014.41001.

References

[1] Mohammed, M.M.M., Elkady, O.A. and Abdelhameed, A.W. (2013) Effect of Alumina Particles Addition on Physico-Mechanical Properties of AL-Matrix Composites. Open Journal of Metal, 3, 72-79.
http://dx.doi.org/10.4236/ojmetal.2013.34011
[2] Gu, X., Zheng, Y., Cheng, Y., Zhong, S. and Xi, T. (2009) In Vitro Corrosion and Biocompatibility of Binary Magnesium Alloys. Biomaterials, 30, 484-498.
http://dx.doi.org/10.1016/j.biomaterials.2008.10.021
[3] Huan, Z.G., Leeflang, M.A., Zhou, J. and Duszczyk, J. (2011) ZK30-Bioactive Glass Composites for Orthopedic Application: A Comparative Study on Fabrication Method and Characteristics. Materials Science and Engineering B, 20, 1644-1652.
http://dx.doi.org/10.1016/j.mseb.2011.07.022
[4] Zainal Abidin, N.I., Martin, D. and Atrens, A. (2011) Corrosion of High Purity Mg, AZ91, ZE41 and Mg2Zn0.2Mn in Hank’s Solution at Room Temperature. Corrosion Science, 53, 862-872. http://dx.doi.org/10.1016/j.corsci.2010.10.008
[5] Zhang, X., Yuan, G., Mao, L., Niu, J. and Ding, W. (2012) Biocorrosion Properties of As-Extruded Mg-Nd-Zn-Zr Alloy Compared with Commercial AZ31 and WE43 Alloys. Materials Letters, 66, 209-211. http://dx.doi.org/10.1016/j.matlet.2011.08.079
[6] Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K.U., Willumeit, R. andFeyerabend, F. (2008) Degradable Biomaterials Based on Magnesium Corrosion. Current Opinion in Solid State and Materials Science, 12, 63-72.
http://dx.doi.org/10.1016/j.cossms.2009.04.001
[7] Song, G. (2007) Control of Biodegradation of Biocompatible Magnesium Alloys. Corrosion Science, 49, 1696-1701.
http://dx.doi.org/10.1016/j.corsci.2007.01.001
[8] Staiger, M.P., Pietak, A.M., Huadmai, J. and Dias, G. (2006) Magnesium and Its Alloys as Orthopedic Biomaterials: A Review. Biomaterials, 27, 1728-1734.
http://dx.doi.org/10.1016/j.biomaterials.2005.10.003
[9] Razavi, M., Fathi, M.H. and Meratian, M. (2010) Bio-Corrosion Behavior of Magnesium-Fluorapatite Nanocomposite for Biomedical Applications. Materials Letters, 64, 2487-2490.
http://dx.doi.org/10.1016/j.matlet.2010.07.079
[10] Jurczyk, M.U., Jurczyk, K., Miklaszewski, A. and Jurczyk, M. (2011) Nanostructured Titanium-45S5 Bioglass Scaffold Composites for Medical Applications. Materials and Design, 32, 4882-4889 http://dx.doi.org/10.1016/j.matdes.2011.06.005
[11] Jamaludin, S.B., Adzali, N.M.S. and Derman, M.N. (2014) Microstructure and In-Vitro Test Bioactivity Behavior of co-cr-mo (f-75)/Hydroxyapatite in Phosphate Buffered Saline Solution. Acta Metallurgica Slovaca, 20, 82-88.
[12] Rahimian, M., Ehsani, N., Parvin, N. and Baharvandi, H.R. (2009) The Effect of Particle Size, Sintering Temperature and Sintering Time on the Properties of Al-Al2O3 Composites, Made by Powder Metallurgy. Journal of Materials Processing Technology, 209, 5387-5393.
http://dx.doi.org/10.1016/j.jmatprotec.2009.04.007
[13] Varol, T. and Canakci, A. (2013) Effect of Particle Size and Ratio of B4C Reinforcement on Properties and Morphology of Nanocrystalline Al2024-B4C Composite Powders. Powder Technology, 246, 462-472.
http://dx.doi.org/10.1016/j.powtec.2013.05.048
[14] Xu, X., Huang, L., Liu, X. and Fu, X. (2002) Effects of α/β Ratio in Starting Powder on Microstructure and Mechanical Properties of Silicon Nitride Ceramics. Ceramics International, 28, 279-281.
http://dx.doi.org/10.1016/S0272-8842(01)00091-8
[15] Slipenyuk, A., Kuprin, V., Milman, Yu., Spowart, J.E. and Miracle, D.B. (2004) The Effect of Matrix to Reinforcement Particle Size Ratio (PSR) on the Microstructure and Mechanical Properties of a PM Processed AlCuMn/SiCp MMC. Materials Science and Engineering A, 381, 165-170.
http://dx.doi.org/10.1016/j.msea.2004.04.040
[16] de Fátima Ferreira Mariotto, S., Guido, V., Liu, Y.C., Soares, C.P. and Cardoso, K.R. (2011) Porous Stainless Steel for Biomedical Applications. Materials Research, 14, 146-154.
http://dx.doi.org/10.1590/S1516-14392011005000021
[17] ASTM B923 (2010) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry. Philadelphia: ASTM International. http://dx.doi.org/10.1520/B0923-10
[18] Askeland, D.R. and Phulé, P.P. (2008) The Science and Engineering of Materials. International Student Ed., Ohio: Cengage Learning.
[19] ASTM NACE TM0169/G31—12a (2012) Standard Guide for Laboratory Immersion Corrosion Testing of Metals. Philadelphia: ASTM International. http://dx.doi.org/10.1520/G0031-12A
[20] ASTM G1 (2011) Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens. Philadelphia: ASTM International. http://dx.doi.org/10.1520/G0001-03R11
[21] Razavi, M., Fathi, M.H. and Meratian, M. (2010) Fabrication and Characterization of Magnesium-Fluorapatite Nanocomposite for Biomedical Applications. Materials Characterization, 61, 1363-1370. http://dx.doi.org/10.1016/j.matchar.2010.09.008
[22] Ghali, E., Dietzel, W. and Kainer, K.U. (2004) General and Localized Corrosion of Magnesium Alloys: A Critical Review. Journal of Materials Engineering and Performance, 13, 7-23.
http://dx.doi.org/10.1361/10599490417533
[23] Poinern, G.E.J., Brundavanam, S. and Fawcett, D. (2012) Biomedical Magnesium Alloys: A Review of Material Properties, Surface Modifications and Potential as a Biodegradable Orthopaedic Implant. American Journal of Biomedical Engineering, 2, 218-240. http://dx.doi.org/10.5923/j.ajbe.20120206.02
[24] Capek, C. and Vojtěch, D. (2013) Properties of Porous Magnesium Prepared by Powder Metallurgy. Materials Science and Engineering C, 33, 564-569.
http://dx.doi.org/10.1016/j.msec.2012.10.002
[25] Li, Y.H., Rao, G.B., Rong, L.J., Li, Y.Y. and Ke, W. (2003) Effect of Pores on Corrosion Characteristics of Porous NiTi Alloy in Simulated Body Fluid. Materials Science and Engineering A, 363, 356-359.
http://dx.doi.org/10.1016/S0921-5093(03)00629-4
[26] Liu, C., Xin, Y., Tang, G. and Chu, P.K. (2007) Influence of Heat Treatment on Degradation Behavior of Bio-Degradable Die-Cast AZ63 Magnesium Alloy in Simulated Body Fluid. Materials Science and Engineering A, 456, 350-357.
http://dx.doi.org/10.1016/j.msea.2006.12.020
[27] Zhang, D., Hupa, M. and Hupa, L. (2008) In Situ pH within Particle Beds of Bioactive Glasses. Acta Biomaterialia, 4, 1498-1505.
http://dx.doi.org/10.1016/j.actbio.2008.04.007
[28] Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y. and Bian, Y. (2010) Research on an Mg-Zn Alloy as a Degradable Biomaterial. Acta Biomaterialia, 6, 626-640.
http://dx.doi.org/10.1016/j.actbio.2009.06.028

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.