Share This Article:

Gas-phase Synthesis of Carbon Nanostructures and Composites

Abstract Full-Text HTML Download Download as PDF (Size:1594KB) PP. 1-4
DOI: 10.4236/ojm.2013.33B001    3,462 Downloads   4,785 Views   Citations


CVD synthesis of carbon nanotubes was carried out using ethanol paralysis in tubular quartz reactor at atmospheric pressure of hydrogen. Ni, Co and Fe catalyst were used for CNT deposition. The CNT samples obtained under various experimental conditions were studied by scanning electron microscopy (SEM), X-ray fluorescent microanalysis and Raman spectroscopy. The ratio of ID/IG of D (~1360 cm-1) and G (~1580 cm-1) Raman peaks was monitored to estimate the crystalline of graphite-like material. The optimal conditions for synthesis of CNTs on the Si-substrates and on the SiO2-based fiberglass were determined. MWNT were produced with 25-30 nm diameters, up to 30 microns in length and with crystallite size La from 2.7 nm to 7 nm. DC electrical properties of carbon composites MWNT/SiO2-fiberglass were examined. Specific resistance was about 10 cm and more depending on CNT content. It was found that the resistivity of the carbon composites MWNT/SiO2 is sensitive to external pressure. Processing of composite with binding polymer significantly improves stability and repeatability of its voltage-current characteristics.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

K. A. Abdullin, D. G. Batryshev, Y. V. Chikhray, M. T. Gabdullin, D. V. Ismailov and A. K. Togambaeva, "Gas-phase Synthesis of Carbon Nanostructures and Composites," Open Journal of Microphysics, Vol. 3 No. 3B, 2013, pp. 1-4. doi: 10.4236/ojm.2013.33B001.


[1] A. V. Eletskii, “Carbon Nanotubes,” UFN 167, 1997, pp. 945-972. doi:10.3367/UFNr.0167.199709b.0945
[2] R. Saito, G. Dresselhaus, et al., “Physical Properties of Carbon Nanotubes,” Singapore, World Scientific Publishing Co. Pte. Ltd, 1998.
[3] F. F. Komarov and A. M. Mironov, “Carbon Nanotubes: Present and Future,” Physics and Chemistry of Solid State, Vol. 5, No. 3, 2004, pp. 411-429.
[4] M. S. Dresselhaus, G. Dresselhaus, J. C. Charlier and E. Hernandez, “Electronic, Thermal and Mechanical Properties of Carbon Nanotubes,” Philo-sophical Transactions of the Royal Society A, Vol. 362, 2004, pp. 2065-2098. doi:10.1098/rsta.2004.1430
[5] P. N. Diachkov, “Carbon Nanotubes,” The Structure, Properties and Applications, Persistence, Laboratory of Knowledge, 2006, p. 296.
[6] H. Qian, E. S. Greenhalgh, M. S. P. Shaffer and A. Bismarck, “Carbon Nanotube-based Hierarchical Composites: a Review,” Journal of Materials Chemistry, Vol. 20, 2010, pp. 4751-4762. doi:10.1039/c000041h
[7] Y. Wang and J. T. W. Yeow, “A Review of Carbon Nanotubes-Based Gas Sensors,” Journal of Sensors 2009, 2009, pp. 1-24, doi:10.1155/2009/493904
[8] M. Kumar and Y. Ando, “Chemical Vapor Deposition of Carbon Nanotubes: A Review on Growth Mechanism and Mass Production,” Journal of Nanoscience and Nanotechnology Vol. 10, 2010, pp. 3739-3758. doi:10.1166/jnn.2010.2939
[9] F. Tuinstra and J. L. Koening, “Raman Spectrum of Graphite,” Journal of Chemical Physics, Vol. 53, No. 3, 1970, p. 1126. doi:10.1063/1.1674108

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.