Fast Determination of Vitamin B2 Based on Molecularly Imprinted Electrochemical Sensor

DOI: 10.4236/eng.2012.410B034   PDF   HTML     2,870 Downloads   4,194 Views   Citations


Under the condition of weak acidity of pH 5.2, a sensitive vitamin B2 electrochemical sensor based on molecularly imprinted nonconducting polymer of o-aminophenol by potentiostatic polymerization in the presence of template(vitamin B2) on a glassy carbon electrode was prepared, and its performance was studied. The sensor exhibited good sensitivity and selectivity to VB2. The detection limit went down to 2.3851nM, and a linear relationship between the current incremental and the concentration was found in the range of 10~120nM. And the sensor could use in detection of VB2 real sample for a long time and show good reproducibility. The average recovery rate to VB2 was 98.41%.

Share and Cite:

P. Xu, C. Qiao, S. Yang, L. Liu, M. Wang and J. Zhang, "Fast Determination of Vitamin B2 Based on Molecularly Imprinted Electrochemical Sensor," Engineering, Vol. 4 No. 10B, 2012, pp. 129-134. doi: 10.4236/eng.2012.410B034.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] [1] A. Niazi, A. Yazdanipour, J. Ghasemi and A. Abbasi, “Determination of riboflavin in human plasma by excitation-emission matrix fluorescence and multi-way analysis,” J. Chin. Chem Soc., vol. 53, pp. 503-510, 2006.
[2] L. Hu, “Determination of riboflavin by capillary electrophoresis with in-column optical fiber laser-induced fluorescence detection and study on a new reflction detection for capillary electrophoresis,”. Chengdu: college of chemistry, Sichuan University, 2007.
[3] M. Wang, L. X. Zhao, M.L.Liu, J.M. Lin, “Determination of fiboflavin by enhancing the chemiluminescence intensity of peroxomonosulfate-cobalt(Ⅱ) system”, Spectrochimica Acta Part A, vol. 66, pp. 1222-1227. 2007.
[4] Q.Y. Li, H. Li, “Determination of vitamin B2 based on Luminol-Cu(Ⅱ) system,” Chinese Journal of Spectroscopy Laboratory, vol. 28, No. 4, pp. 1986-1989, July 2011.
[5] L.J. Yuan, D.B. Chen, “Determination of vitamin B1, vitamin B2 in four vitamin glucose calcium particles for children by HPLC,” Journal of Yichun College, vol. 30, No. 4, pp. 89-90, August 2008.
[6] X. Y. Bi, Z. L. Zhao, N. H. Fu, X. M. Li, L. Li, G. P. Zhang, “HPLC determination of the content of the water-soluble vitamins in ferrous sulfate and vitamin sustained-release tablets,” Pharm. J Chin. PLA, vol. 23, No. 5, pp. 389-391, October 2007.
[7] A. Gliszczynska-Swiglo, A. Kozio?owa, “Chromatographic determination of riboflavin and its derivatives in food”, Journal of Chromatography A, vol. 881, pp. 285-297, 2000.
[8] R. M. Kotkasr, P. B. Desai, A. K. Srivastava, “Behavior of riboflavin on plain carbon paste and aza macrocycles based chemically modified electrodes,” Sensors and Acuators B, vol. 124, pp. 90-98, 2007.
[9] S. L. Bhattar, G. B. Kolekar, S. R. Patil, “Fluorescence resonance energy transfer between perylene and riboflavin in micellar solution and analytical application on determination of vitamin B2,” Journal of Luminescence, vol. 128, pp. 306-310, 2008.
[10] Y. Y Su, X. H. Li, “Indirect determination of riboflavin in pharmaceuticals by flame atomic absorption spectrometry,” Chemical Research and Application, vol. 23, No. 3, pp. 364-366, March 2011.
[11] A. K. Su, C. H. Lin, “Determination of riboflavin in urine by capillary electrophoresis-blue light emitting diode-induced fluorescence detection combined with a stacking technique,” Journal of Chromatography B, vol. 785, pp. 39-46, 2003.
[12] M. Z. ángel Ríos, “Supercritical fluid extraction as on-line clean-up technique for determination of riboflavin vitamins in food samples by capillary electrophoresis with fluorimetric detection,” Electrophoresis, vol. 29, pp. 3213-3219, 2008.
[13] M. Aranda, G. Morlock, “Simultaneous determination of riboflavin, pyridoxine, nicotinamide, caffeine and taurine in energy drinks by planar chromatography-multiple detection with confirmation by electrospray ionization mass spectrometry,” Journal of Chromatography A, vol. 1131, pp. 253-260, 2006.
[14] S. Pradhan, M. Boopathi, O. Kumar, A. Baghel, P. Pandey, T.H. Mahato, B. Singh, R. Vijayaraghavan, “Molecularly imprinted nanopatterns for the recognition of biological warfare agent ricin,” Biosensors and Bioelectronics, vol. 25, pp. 592-598, 2009.
[15] D. W. Pan, J. H. Chen, S. Z. Yao, W. Y. Tao, and L. H. Nie, “An amperometric glucose biosensor based on glucose oxidase immobilized in electropolymerized poly(o-aminophenol) and carbon nanotubes composite film on a gold electrod,” Analytical Science, vol. 21, pp. 367-371, April 2005.
[16] D. Hu, C. Peng, and G.Z. Chen, “Electrodeposition of nonconducting polymers: roles of carbon nanotubes in the process and products,” ACS NANO, vol. 4, No. 7, pp. 4274-4282. 2010.
[17] Y.Q. Miao, J.R. Chen, X.H. Wu, “Using electropolymerized non-conducting polymers to develop enzyme amperometric biosensors,” Trends in Biotechnology, vol. 22, issue. 5, pp. 227-231, May 2004.
[18] W. A. Wu, Z. F. Yin, J. R. Wei, M. D. Guo, “A sensitive mitoxantrone sensor based on molecularly imprinted electropolymer of o-aminophenol,” Journal of Analytical Science, vol. 24, No. 6, pp. 681-684, December 2008.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.