Study of Alkali Metal Corrosion on Heating Surfaces and Bed Material Agglomerate in Biomass-fired Fluidized Bed Boiler

DOI: 10.4236/epe.2013.54B002   PDF   HTML     4,175 Downloads   5,326 Views   Citations


The bed material agglomeration and heating surface high-temperature Corrosion Problems of biomass-fired boiler in South China were studied in this work. The inner and outer surfaces of the corrosion sample were investigated by scanning electron microscope (SEM) with Bruker EDX and XRD. Results showed that the outer side of the corrosion sample was mainly composed of alkali chloride deposited ash, sulphide and a small amount of eutectoid; while the inner side of the corrosion sample was still mainly made up of the composition of SUS316, but added with alkali metal, oxygen, chlorine and sulphur elements, appearing as the corrosion products and eutectoid. It was thought that alkali chloride deposit and the reaction with pipe metal to generate low melting point eutectoid on the outer surfaces, or the corrosion reaction through the alkali metal sulphatization process was the main reasons leading to the damage of metal surface oxide film. Chlorine plays a role as haptoreaction in the corrosion process, and transports metal material as the form of chloride from the inner side to the outer side of the pipe surfaces by diffusion, accelerating the corrosion process. Meanwhile, the slag was studied by scanning electron microscope (SEM) with Bruker EDX, and the transformation process of slage was computationally analyzed by FACTSAGE. Results showed that the amount of alkali metal in the agglomerates was little, however, caused a great impact on severe agglomerates. The increase of temperature enhanced the conversion process of alkali metal to molten oxide, especially when the temperature was higher than760℃, the amount of molten product increased sharply. Thus, the temperature control of fluidized bed plays an important role in solving the problem of alkali metal agglomerates; it also reliefs the volatile of alkali metal into gas phase, benefiting the control of heating surface corrosion.

Share and Cite:

T. Chen, Y. Liao, S. Wu, X. Ma and J. Song, "Study of Alkali Metal Corrosion on Heating Surfaces and Bed Material Agglomerate in Biomass-fired Fluidized Bed Boiler," Energy and Power Engineering, Vol. 5 No. 4B, 2013, pp. 6-14. doi: 10.4236/epe.2013.54B002.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] I. Obernbergr, R. Biedermann, W. Widmann and R. Riedl, “Concentrations of Inorganic Elements in Biomass Fuels and Recovery in the Different Ash Fractions,” Biomass and Bioenergy, Vol. 12, No. 3, 1997, pp. 211-224. doi:10.1016/S0961-9534(96)00051-7
[2] K. Salo, W. Mojtahedi, “Fate of Alkalis and Trace Metals in Biomass Gasification,” Biomass and Bioenergy, Vol. 15, No. 3, 1998, pp. 263- 267 doi:10.1016/S0961-9534(98)00019-1
[3] F. Lang, X. Q. Ma, J. J. Wang, “Study on the Ash Characteristics of Stalks,” Renewable Energy Resources, Vol. 25, No. 4, 2007, pp. 25-28. doi:10.3969/j.issn.1671-5292.2007.04.008
[4] J. Xu, “Experimental Research on Alkali Release from Biomass Combustion,” Master’s thesis, Zhejiang University, Hangzhou, 2006.
[5] H. P. Nielsena, F. J. Frandsena, K. Dam-Johansena, L. L. Baxter, “The Implications of Chlorine-associated Corrosion on the Operation of Biomass-fired Boilers,” Progress in Energy and Combustion Science, Vol. 26, No. 3, 2000, pp. 283-298. doi:10.1016/S0360-1285(00)00003-4
[6] H. J. Grabke, E. Reese and M. Spiegel, “The Effects of Chlorides, Hydrogen Chloride, and Sulfur Dioxide in the Oxidation of Steels below Deposits,” Corrosion Science, Vol. 37, No. 7, 1995, pp. 1023-1043. doi:10.1016/0010-938X(95)00011-8
[7] M. Z. Shi, “Research on Sample Treatment of Chlorine Content in Solid Biofuel,” Goal Quality and Technology, No. 6, 2009, pp. 36-42. doi:10.3969/j.issn.1007-7677.2009.06.012
[8] M. L. Ye, Q. H. Shi and Y. Q. Wang, “Sample Pretreatment Technology of Ion Chromatography,” Modern Scientific Instruments, No. 2, 2004, pp. 49-53. doi:10.3969/j.issn.1003-8892.2004.02.011
[9] H. Marschner, “Mineral Nutrition of Higher Plants,” 2th Edition, Academic Press, London, 2002.
[10] W. Wei, F. Huang, C. J. Yu and M. X. Fang,“Primary Investigation of High-temperature Corrosion Problems in Biomass Combustion Equipment,” Energy Engineering, No. 2, 2011, pp. 23-28. doi:10.3969/j.issn.1004-3950.2011.02.007
[11] O. H. Larsen, N. Henriksen and S. Inselmann, “The Influence of Boiler Design and Process Conditions on Fouling and Corrosion in Straw and Coal / strawfired Ultra Supercritical Power Plants,” Ninth European Bioenergy Conference,Copenhagen, Denmark, 1996, p. 50.
[12] M. Aho and E. Ferrer, “Importance of Coal Ash Composition in Protecting the Boiler against Chlorine Deposition during Combustion of Chlorine-rich Biomass,” Fuel, Vol. 84, No. 2-3, 2005, pp. 201-212. doi:10.1016/j.fuel.2004.08.022
[13] M. Zevenhoven-Onderwater, M. Ohman, B. J. Skrifvars, R. Backman, A. Nordin and M. Hupa, “Bed Agglomeration Characteristics of Wood-Derived Fuels in FBC,” Energy & Fuels, Vol. 20, No. 2, 2006, pp. 818-824. doi:10.1021/ef050349d

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.