Barrier, Adsorptive, and Mechanical Properties of Containers Molded from PET/PP Blends for Use in Pharmaceutical Solutions

DOI: 10.4236/msa.2013.410072   PDF   HTML     4,141 Downloads   5,919 Views   Citations

Abstract

In this study, the adsorptive properties of L-menthol, moisture vapor transmission rate, and mechanical properties of poly (ethylene terephthalate) (PET), polypropylene (PP), and their blends were evaluated in containers fabricated by injection molding without a compatibilizing agent. These containers intended to hold pharmaceutical solutions containing lipophilic chemicals such as L-menthol. By the addition of a small amount of PP, the moisture barrier properties of PET were effectively improved, but its anti-adsorptive property was reduced. The strength of the PET/PP blends was reduced, but some PET/PP blends were still able to bear the experimental load required for application in eye-drop containers. PET/PP = 9/1 and PET/PP = 8/2 were found to be most applicable for using in the fabrication of containers for medicinal solutions.

Share and Cite:

T. Otsuka, A. Kurosawa, M. Maeda, K. Yamada, M. Murakami and H. Hamada, "Barrier, Adsorptive, and Mechanical Properties of Containers Molded from PET/PP Blends for Use in Pharmaceutical Solutions," Materials Sciences and Applications, Vol. 4 No. 10, 2013, pp. 589-594. doi: 10.4236/msa.2013.410072.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] X. L. Xu, N. N. Yu, Z. Z. Bai, Y. B. Xun, D. Jin, Z. J. Li and H. Cui, “Effect of Menthol on Ocular Drug Delivery,” Graefe’s Archive for Clinical and Experimental Ophthalmology, Vol. 249, No. 10, 2011, pp. 1503-1510. http://dx.doi.org/10.1007/s00417-011-1703-z
[2] M. G. Sajilata, K. Savitha, R. S. Singhal and V. R. Kanetkar, “Scalping of Flavors in Packaged Foods,” Comprehensive Reviews in Food Science and Food Safety, Vol. 6, No. 1, 2007, pp. 17-35. http://dx.doi.org/10.1111/j.1541-4337.2007.00014.x
[3] C.-S. Deng, H. E. Assender, F. Dinelli, O. V. Kolosov, G. A. D. Briggs, T. Miyamoto and Y. Tsukahara, “Nucleation and Growth of Gas Barrier Aluminium Oxide on Surfaces of Poly(Ethylene Terephthalate) and Polypropylene: Effects of the Polymer Surface Properties,” Journal of Polymer Science Part B: Polymer Physics, Vol. 38, No. 23, 2000, pp. 3151-3162. http://dx.doi.org/10.1002/1099-0488(20001201)38:23<3151::AID-POLB150>3.0.CO;2-Q
[4] “Pharmaceutical Development Q8(R2),” International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use, ICH Harmonised Tripartite Guideline Current Step 4 Version, 2009. http://www.ich.org/fileadmin/Public_Web_Site/ICH_Products/Guidelines/Quality/Q8_R1/Step4/Q8_R2_Guideline.pdf
[5] T. Kamako, M. Oya and T. Nishihata, “Prediction of Water Loss from Plastic Container for Eye-Drop in Various Storage Conditions,” PDA Journal of GMP and Validation in Japan, Vol. 3, No. 2, 2001, pp. 97-103. http://dx.doi.org/10.11347/pda.3.97
[6] M. K. Cheung and D. Chan, “Mechanical and Rheological Properties of Poly(Ethylene Terephthalate)/Polypropylene Blends,” Polymer International, Vol. 43, No. 3, 1997, pp. 281-287. http://dx.doi.org/10.1002/(SICI)1097-0126(199707)43:3<281::AID-PI800>3.0.CO;2-Q
[7] M. Akbari, A. Zadhoush and M. Haghighat, “PET/PP Blending by Using PP-g-MA Synthesized by Solid Phase,” Journal of Applied Polymer Science, Vol. 104, No. 6, 2007, pp. 3986-3993. http://dx.doi.org/10.1002/app.26253
[8] C. Papadopoulou and N. Kalfoglou, “Comparison of Compatibilizer Effectiveness for PET/PP Blends: Their Mechanical, Thermal and Morphology Characterization,” Polymer, Vol. 41, No. 7, 2000, pp. 2543-2555. http://dx.doi.org/10.1016/S0032-3861(99)00442-5
[9] M. Pracella and D. Chionna, “Reactive Compatibilization of Blends of PET and PP Modified by GMA Grafting,” Macromolecular Symposia, Vol. 198, No. 1, 2003, pp. 161-172. http://dx.doi.org/10.1002/masy.200350814
[10] M. Xanthos, M. W. Young and J. A. Biesenberger, “Polypropylene/Polyethylene Terephthalate Blends Compatibilized through Functionalization,” Polymer Engineering & Science, Vol. 30, No. 6, 1990, pp. 355-365. http://dx.doi.org/10.1002/pen.760300607
[11] Y. X. Panga, D. M. Jiaa, H. J. Hua, D. J. Hourstonb and M. Songb, “Effects of a Compatibilizing Agent on the Morphology, Interface and Mechanical Behaviour of Polypropylene/Poly(Ethylene Terephthalate) Blends,” Polymer, Vol. 41, No. 1, 2000, pp. 357-365. http://dx.doi.org/10.1002/pen.760300607

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.