Flexible Manufacturing of Continuous Process Enterprises with Large Scale and Multiple Products

Abstract

Compared with modularized enterprises, continuous Process (CP) enterprises exhibit differing characteristics in manufacturing flexibility. Relative to the vast literature on the flexibility of modularized enterprises, the manufacturing flexibility of CP enterprises has aroused little attention in current literature. In this paper, we develop a new theory to give a reasonable explanation for the flexible manufacturing problem of CP enterprises with multiple products. Based on the analysis of flexible manufacturing process of Jiahua enterprise, we find that CP enterprises can create product diversity through component flexibility, control flexibility and mixed flexibility. The discussion on the permutoid, arising from the product production transformation process of CP enterprises, further reveals the possibility of cost reduction in production transformation and thus efficiency enhancement of manufacturing flexibility. The cost-efficient flexibility of CP enterprises is realized by properly scheduling the production process, shortening the continuous transforming time of the permutoid and reverse development of the permutoid, with exploiting the characteristics of compatibility, continuity and reversibility of the permutoid. Finally, we conclude that the study on the manufacturing flexibility of CP enterprises will contribute to the flexible production transformation in the industries with CP.

Share and Cite:

Y. Xu, Y. Du, Y. Zeng and S. Li, "Flexible Manufacturing of Continuous Process Enterprises with Large Scale and Multiple Products," Technology and Investment, Vol. 4 No. 1, 2013, pp. 45-56. doi: 10.4236/ti.2013.41006.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] J. PineⅡ, “Mass Customization: New Frontier of Enterprise Competition,” China Renmin UP, 2000.
[2] W. Christopher and L. Hart, “Mass Customization: Conceptual Underpinnings, Opportunities and Limits,” International Journal of Service Industry Management, Vol. 6, No. 2, 1995, pp. 36-45. doi:10.1108/09564239510084932
[3] K.-X. Dai and H.-X. Guo, “The Study of Core Competence of MC Enterprise,” Modern Management Science, Vol. 25, No. 3, 2006, pp. 66-67.
[4] A. K. Sethi and S. P. Sethi, “Flexibility in Manufacturing: A Survey,” International Journal of Flexible Manufacturing Systems, Vol. 2, No. 4, 1990, pp. 289-328. doi:10.1007/BF00186471
[5] M. ko Aoki and A. Haruhiko, “Modularization Times—The Essence of New Industry Structure,” Shanghai Far East Press, Shanghai, 2003.
[6] G. U. Xin-jian, Q. I. Guo-ning, “Quantitative Analysis Method of Mass Customization,” China Mechanical Engineering, Vol. 12, No. 6, 2001, pp. 312-31.5
[7] Y.-H. Zhang, “Mass Customization Strategy for Customer Requirement,” Tsinghua University Press, Beijing, 2010.
[8] D. M. Anderson and J. PineⅡ, “New Frontier for Business Competition in the 21st Century—Agile Product Development under MC,” China Machine Press, Beijing, 1999.
[9] C. Y. Baldwin and K. B.Clark, “Managing in an Age of Modularity,” Harvard Business Review, Vol. 75, No. 5, 1997, pp. 84-93.
[10] C. Y. Baldwin and B. Kim “Clark Design Rules: The Power of Modularity,” MIT Press, Cambridge, 2000.
[11] J. Wang, “Production Operation Management,” Tsinghua University Press, Beijing, 2011.
[12] T.-Q. Zan, “Systems Economy: The Essence of New Economy—On the Theory of Modularity,” China Industrial Economy, Vol. 20, No. 9, 2003, pp. 23-29.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.