NDI of Rail Squats and Estimating Defect Size and Location Using Lock-In Thermography

Daren Peng, Rhys Jones

.
Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, Australia.

DOI: 10.4236/eng.2013.51005                

Abstract

Rail squats are a form of near surface rolling contact fatigue damage found in rail heads. Currently, the most popular method to detect the rail squats is utilizing ultrasonic techniques to determine their presence and measure their depths. This technique needs to be direct contact between the probe and the rail head, with a coupling fluid in at the interface. Other weaknesses of these ultrasonic techniques include false detections as well as missed detections. Infrared thermography is a relatively new non-destructive inspection technique used for a wide range of applications but is not used for rail squat detection. Lock-in thermography is a non-destructive inspection technique that can be used for the detection of near surface defects. It utilizes an infrared camera to detect the thermal waves and then produces a thermal image, which displays the local thermal wave variation in phase or amplitude. In inhomogeneous materials, the amplitude and phase of the thermal wave carries information related to both the local thermal properties and the nature of the structure being inspected. This comparison is then used to determine the phase angle difference (Δf) between the input and the thermal response of the object. The aim of this paper is to determine whether lock-in thermography can be used to firstly locate squats in rails, and secondly measure their depths. It has demonstrated the feasibility for using such a technique in generating thermal responses that could be adequately utilized for the purpose of defect characterization.

Keywords

Lock-In Thermography; Phase Contrast; Infrared Camera; Squat; Non-Destructive Inspection

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	M. Kerr, A. Wilson and S. Marich, “The Epidemiology of Squats and Related Rail Defects,” Proceedings of CORE 2008 Conference on Railway Engineering: Rail; The Core of Integrated Transport, Perth, 2008, pp. 83-96.
[2]	S. Marichand S. Mackie, “The Development of Squat Defects under High Axle Load Operations,” CORE 2002: Cost Efficient Railways through Engineering, Wollongong, 2002, pp. 17-26.
[3]	G. Zumpano and M. Meo, “A New Damage Detection Technique Based on Wave Propagation for Rails,” International Journal of Solids and Structures, Vol. 43, No. 5, 2005, pp. 1023-1047.
[4]	P. C. Johnson and S. Wise, “Significance of a Detection of Defects in Rails,” Non-Destructive Testing, Vol. 3, No. 2, 1970, pp. 111-116. doi:10.1016/0029-1021(70)90100-3
[5]	D. E. Bray and M. Najm, “Ultrasonic Angle-Beam Inspection through the Cold-Worked Layer in Railroad Rail,” NDT & E International, Vol. 18, No. 3, 1985, pp. 139-145. doi:10.1016/0308-9126(85)90198-1
[6]	R. Clark, “Rail Flaw Detection: Overview and Needs for Future Developments,” NDT & E International, Vol. 37, No. 2, 2004, pp. 111-119. doi:10.1016/j.ndteint.2003.06.002
[7]	D. Wu, G. Zenzinger, W. Karpen and G. Busse, “Nondestructive Inspection of Turbine Blades with Lock-In Thermography,” Materials Science Forum, Vol. 210-213, 1996, pp. 289-295. doi:10.4028/www.scientific.net/MSF.210-213.289
[8]	C. Meola, R. D. Maio, N. Roberti and G. M. Carlomagno, “Application of Infrared Thermography and Geophysical Methods for Defect Detection in Architectural Structures,” Engineering Failure Analysis, Vol. 12, No. 6, 2005, pp. 875-893. doi:10.1016/j.engfailanal.2004.12.030
[9]	C. Meola, G. M. Carlomagno, A. Squillace and A. Vitiello, “Non-Destructive Evaluation of Aerospace Materials with Lock-In Thermography,” Measurement Science and Technology, Vol. 13, No. 3, 2006, pp. 380-389.
[10]	D. Wu, A. Salerno, U. Malter, R. Aoki, R. Kochendorfer, P. K. Kachele, K. Woithe, K. Pfister and G. Busse, “Inspection of Aircraft Structural Components Using LockIn-Thermgraphy,” Quantitative Infrared Thermography, QIRT 96, Edizione ETS, Pisa, 1997.
[11]	C. Meola, G. M. Carlomagno, A. Squillace and G. Giorleo, “Non-Destructive Control of Industrial Materials by Means of Lock-In Thermography,” Measurement Science and Technology, Vol. 13, No. 10, 2002, pp. 1583-1590. doi:10.1088/0957-0233/13/10/311
[12]	A. Dillenz, T. Zweschper, G. Riegert and G. Busse, “Progress in Phase Angle Thermography,” Review of Scientific Instruments, Vol. 74, No. 1, 2003, pp. 417-421. doi:10.1063/1.1524010
[13]	W. Bai and B. S. Wong, “Photothermal Models for LockIn Thermographic Evaluation of Plates with Finite Thickness under Convection Conditions,” Journal of Applied Physics, Vol. 89, No. 6, 2001, pp. 3275-3283. doi:10.1063/1.1344916
[14]	G. Busse, D. Wu and W. Karpen, “Thermal Wave Imaging with Phase Sensitive Modulated Thermography,” Journal of Applied Physics, Vol. 71, No. 8, 1992, pp. 39623966. doi:10.1063/1.351366
[15]	C. D. Wallbrink, S. Wade and R. Jones, “The Effect of Size on the Quantitative Estimation of Defect Depth in Steel Structures Using Lock-In Thermography,” Journal of Applied Physics, Vol. 101, No. 10, 2007, Article ID: 104907. doi:10.1063/1.2732443
[16]	M. Kerr and A. Wilson, “Railcorp Squat Samples,” Railcorp Report, Australia, 2008.
[17]	NEiNastran User’s Manual, Version 10, Noran Engineering, Inc., California, 2010.
[18]	FEMAP, “Finite Element Modelling and Post Processing?,” Version 10.0.2, Structural Dynamics Research Corporation, Pennsylvania, 2009.