The Effect of Curative Concentration on Thermal and Mechanical Properties of Flexible Epoxy Coated Jute Fabric Reinforced Polyamide 6 Composites

DOI: 10.4236/ojcm.2012.24016   PDF   HTML     4,146 Downloads   7,927 Views   Citations


Many researchers have shown interest in the reinforcement of commodity thermoplastic with natural fibers. However, the drawback of natural fibers is their low thermal processing temperatures, that border around 200℃. In this investigation, we tried to improve the thermal stability of natural fibers with the use of flexible epoxy surface coating that could facilitate processing with engineering thermoplastics. Jute fabric and Polyamide 6 (PA6) composites were prepared by compression molding. The thermal decomposition characteristics of the jute fabric were evaluated by using thermo gravimetric analysis (TGA). Mechanical analysis was conducted to evaluate tensile test and three point bending test of composite. It was found that thermal degradation resistance of jute fabric was improved by coating with flexible epoxy resin. Moreover, the flexural modulus improved with increasing curative concentration. The interfacial interaction between the epoxy and PA6 was clearly indicated by the photo micrographs of the polished cross sections of the coated and uncoated jute fabric/PA6 composites.

Share and Cite:

S. Thitithanasarn, K. Yamada, U. Ishiaku and H. Hamada, "The Effect of Curative Concentration on Thermal and Mechanical Properties of Flexible Epoxy Coated Jute Fabric Reinforced Polyamide 6 Composites," Open Journal of Composite Materials, Vol. 2 No. 4, 2012, pp. 133-138. doi: 10.4236/ojcm.2012.24016.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] K. Mohanty, M. Misra, and G. Hinrichsen, “Biofibres, Biodegradable Polymers and Biocomposites: An Overview,” Macromolecular Materials and Engineering, Vol. 276/277, No.1, 2000, pp. 1-24. doi:10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W
[2] D. N. Saheb and J. P. Jog, “Natural Fiber Polymer Composites: A Review,” Advances in Polymer Technology, Vol. 18, No. 4, 1999, pp. 351-363. doi:10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X
[3] C. B. Vick, and E. A. Okkonen, “Structurally Durable Epoxy Bonds to Aircraft Woods,” Forest Products Journal, Vol. 47, No. 3, 1997, pp. 71–77.
[4] M. M. Sain, and B. V. Kokta, “Toughened Thermoplastic Composite I Cross-Linkable Phenol Formaldehyde and Epoxy Resins-Coated Cellulosic-Filled Polypropylene Composites,” Journal of Applied Polymer Science, Vol. 48, No. 12, 1993, pp. 2181–2196. doi:10.1002/app.1993.070481212
[5] C. B. Vick, E. A. Okkonen, A. Christiansen, “Reactivity of Hydroxymethylated Resorcinol Coupling Agent as it Affects Durability of Epoxy Bonds to Douglas-fir,” Wood and Fiber Science, Vol. 30, No.3, 1998, pp. 312–322.
[6] K. Oksman, M. Skrifvars, and J-F. Selin, “Natural Fibres as Reinforcement in Polylactic Acid (PLA) Composites,” Composites Science and Technology, Vol. 63, No. 9 2003, pp 1317-1324. doi:10.1016/S0266-3538(03)00103-9
[7] R. G. Raj, B. V. Kokta, and C. J. Deneault, “Wood Flour as A Low-Cost Reinforcing Filler for Polyethylene: Studies on Mechanical Properties,” Journal of Materials Science, Vol. 25, No. 3, 1990, pp. 1851–1855 doi:10.1007/BF01045396
[8] S. S. Tripathy, G. Levita, and L. D. Landro, “Interfacial Adhesion in Jute-Polyolefin Composites,” Polymer Composites, Vol. 22, No. 6, 2001, pp. 815-822. doi:org/10.1002/pc.10583
[9] D. Maldas, B. V. Kokta, R. G. Raj, and C. Daneault, “Improvement of The Mechanical Properties of Sawdust Wood Fibre—Polystyrene Composites by Chemical Treatment,” Polymer, Vol. 29, No. 7, 1988, pp. 1255–1265. doi:10.1016/0032-3861(88)90053-5
[10] L. M. Matuana, C. B. Park, and J. J. Balatinecz, “Processing and Cell Morphology Relationship for Microcellular Foamed PVC/Wood-Fiber Composites,” Polymer Engineering & Science, Vol. 37, No. 7, 1997, pp. 1137–1147. doi:10.1002/pen.11758
[11] R. G. Raj, B. V. Kokta, D. Maldas, and C. Daneault, “Use of Wood Fibers in Thermoplastic Composites: VI. Isocyanate as A Bonding Agent for Polyethylene–Wood Fiber Composites,” Polymer Composites, Vol. 9, No. 6, 1988, pp. 404–411. doi:10.1002/pc.750090606
[12] M. A. Khan, G. Hinrichsen and L. T. Drzal, “Influence of Novel Coupling Agents on Mechanical of Jute Reinforced Polypropylene Composite,” Journal of Materials Science Letters, Vol. 20, No. 18, 2001, pp. 1711-1713. doi:10.1023/A:1012489823103
[13] F. M. B. Coutinho, T. H. S. Costa, and D. L. Carvalho, “Polypropylene–Wood Fiber Composites: Effect of Treatment and Mixing Conditions on Mechanical Properties,” Journal of Applied Polymer Science, Vol. 65, No. 6, 1997, pp. 1227–1235 doi:10.1002/(SICI)1097-4628(19970808)65:6<1227::AID-APP18>3.0.CO;2-Q
[14] C. B. Vick, K. Ritcher, and B. River, “Hydroxymethylated Resorcinol Coupling Agent for Enhanced Durability of Bisphenol-A Epoxy Bonds to Sitka Spruce,” Wood and Fiber Science, Vol. 27, No.1, 1995, pp. 2–12.
[15] J. George, M.S. Sreekala, and S. Thomas, “A review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites,” Polymer Engineering & Science, Vol. 41, No.9, 2001, pp. 1471-1485. doi:10.1002/pen.10846
[16] L. Y. Mwaikambo, M. P. Ansell, “Chemical Modification of Hemp, Sisal, Jute, and Kapok Fibers by Alkalization,” Journal of Applied Polymer Science, Vol. 84, No. 12, 2001, pp. 2222-2234. doi:10.1002/app.10460
[17] H.M.M.A. Rashed, M. A. Islam, and F.B. Rizvi. “Effect of Process Parameters on Tensile Strength of Jute Fiber Reinforced Thermoplastic Composites,” Journal of Naval Architecture and Marine Engineering, Vol. 3, No. 1 2006, pp 1-6.
[18] Y.Cao, S. Shibata, and I. Fukumoto. “Mechanical Properties of Biodegradable Composites Reinforced With Bagasse Fibre Before and After Alkali Treatments,” Composite A, Vol. 37, No. 3, 2006, pp 423-429. doi:10.1016/j.compositesa.2005.05.045
[19] J. Gassan and A. K. Bledzki, “Thermal Degradation of Flax and Jute Fibers,” Journal of Applied Polymer Science, Vol. 82, No. 6, 2001, pp. 1417-1422. doi:10.1002/app.1979
[20] K. Goda, Y. Cao, “Research and Development of Fully Green Composites Reinforced With Natural Fiber,” Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 3, 2007, pp. 1073-1084. doi:10.1299/jmmp.1.1073
[21] S. C. Jana, and A. Prieto, “On the Development of Natural Fiber Composites of HighTemperature Thermoplastic Polymers,” Journal of Applied Polymer Science, Vol. 86, No. 9, 2002, pp. 2159-2167. doi:10.1002/app.11073
[22] S. C. Jana, and A. Prieto, “Natural Fiber Composites of High-Temperature Thermoplastic Polymers: Effects of Coupling Agents,” Journal of Applied Polymer Science, Vol. 86, No. 9, 2002, pp. 2168-2173. doi:10.1002/app.11072
[23] S. Thitithanasarn, K. Yamada, U. S. Ishiaku, H. Hamada, “Jute Fabric Reinforced Engineering Thermoplastic Sandwich Composites. I. The Effect of Molding Time,” Journal of Applied Polymer Science, Early review, 2012. doi:10.1002/app.37962

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.