The Design of an Intelligent Security Access Control System Based on Fingerprint Sensor FPC1011C

.
DOI: 10.4236/cs.2010.11005   PDF   HTML     9,786 Downloads   18,876 Views   Citations

Abstract

This paper deals with the design of an intelligent access control system based on the fingerprint sensor FPC- 1011C. The design uses the S3C2410 and TMS320VC5510A as the system processor. A fingerprint acquisition module and a wireless alarm module were designed by using the fingerprint sensor FPC1011C and GPRS module SIM100 respectively. The whole system was implemented wireless alarm through messages and GPRS-Internet in the GSM/GPRS web. In order to achieve the simple and high Real-time system, the μC-Linux system migration was also implemented.

Share and Cite:

Y. Wang, H. Liu and J. Feng, "The Design of an Intelligent Security Access Control System Based on Fingerprint Sensor FPC1011C," Circuits and Systems, Vol. 1 No. 1, 2010, pp. 30-33. doi: 10.4236/cs.2010.11005.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] K. L. Zhou and Z. X. Lu, “Design of Vehicle Locks Based on DSP and Fingerprint Identification System,” Journal of Shanxi University of Science & Technology, Vol. 27, No. 5, 2009, pp. 103105.
[2] C. G. Xie, “ARMBased Automatic Fingerprint Identifica-tion System,” Microcomputer Information, Vol. 25, No. 14, 2009, pp. 292294.
[3] H. Guo, Y. S. Guo and Y. Chen, “The Implementation of Remote Meter Reading System Based on Linux and GPRS,” Application of Electronic Technique, Vol. 34, No. 11, 2008, pp. 8284.
[4] F. Ding, “ARMBased Fingerprint Identification System Research and Implementation of [D],” South China Uni-versity of Technology, Guangzhou, 2007.
[5] Z. M. Ma and Y. H. Xu, “ARM Based Embedded Pro-cessor Architecture and Application,” Beijing University of Aeronautics and Astronautics Press, Beijing, 2002.
[6] J.M. Nam, S.M. Jung, D.H. Yang and M.K. Lee, “Design and Implementation of 160 × 192 Pixel Array Capaciti-veType Fingerprint Sensor,” Circuits, Systems & Signal Processing, Vol. 24, No. 4, 2005, pp. 401413.
[7] L. Zhang, “Based on DSP and RF Card Embedded Fin-gerprint Identification System Design and Implementation of [D],” University of Electronic Science and Technology of China, Chengdu, 2009.
[8] K. AlBegain, I. Awan and D. D. Kouvatsos, “Analysis of GSM/GPRS Cell with Multiple Data Service Classes,” Wireless Personal Communications, Vol. 25, No. 1, 2003, pp. 4157.
[9] Y. Li, “ΜCLinux Based on ARM Embedded System Theory and Application,” Tsinghua University Press, Beijing, 2009.
[10] J. K. Zhang and X. Q. Zhang, “Embedded Linux System Development Technology Xiangjie―Based on ARM,” Posts & Telecom Press, Beijing, 2006.
[11] M. F. Du, “Development of Ethernet Interface for Smart Entry Controller Based on ARM & Linux Architecture,” Computer Engineering, Vol. 33, No. 16, 2007, pp. 234 236.
[12] C. J. Zhang, “System of Defending to Rob by Tailing Behind of Double Gate by Chip Microcomputer Control,” Computer Engineering and Applications, Vol. 43, No. 5, 2007, pp. 7981.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.