Optimum Calcium Carbonate Filler Concentration for Flexible Polyurethane Foam Composite

DOI: 10.4236/jmmce.2012.113023   PDF   HTML     10,328 Downloads   15,176 Views   Citations


The production cost of flexible polyurethane foam is significantly dependent on the cost of polyol, which constitute the largest percentage of materials used in foam production with the characteracterics to induce superior mechanical properties. Suitable fillers that are relatively cheap can be introduced in the foam matrix as replacement for polyol. However, certain compositions of filler have deleterious effect on some relevant mechanical properties of the foam. This paper investigates the effect of CaCO3 filler in flexible polyurethane foam matrix for the dual purposes of achieving sustained mechanical properties and reduction in production cost. The optimum CaCO3 composition was found to be 20 wt % representing a concomitant 18.54% reduction in cost of production.

Share and Cite:

M. Usman, S. Adeosun and G. Osifeso, "Optimum Calcium Carbonate Filler Concentration for Flexible Polyurethane Foam Composite," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 3, 2012, pp. 311-320. doi: 10.4236/jmmce.2012.113023.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Woods G. The ICI Polyurethanes Book. 2 ed. New York: Wiley; 1990.
[2] Avar G. Polyurethanes (PU). Kunststoffe International. 2008; (10): 123-127.
[3] Saliba CC, Oréfice RL, Carneiro JRG, Duarte AK, Schneider WT, Fernandes MRF. Effect of the incorporation of a novel natural inorganic I3 438 Sant’Anna et al. Materials Research short fiber on the properties of polyurethane composites. Polym. Test. 2005; 24(7): 819-824.
[4] Bartczak Z, Argon AS, Cohen RE, Weinberg M. Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles. Polymer 1999; 40(9): 2347-2365.
[5] Callister WD. Materials Science and Engineering: An Introduction. 5 ed. New York: John Wiley & Sons; 2000.
[6] Nunes RCR, Fonseca JLC, Pereira MR. Polymer-filler interactions and mechanical properties of a polyurethane elastomer. Polym. Test. 2000; 19(1): 93-103.
[7] Mothé CG, Araújo CR, Oliveira MA, Yoshida MI. Thermal decomposition kinetics of polyurethane-composites with bagasse of sugar cane. J. Therm. Anal. Calorim. 2002; 67(2): 305-312.
[8] Mothé CG, Araújo CR. Properties of polyurethane elastomers and composites by thermal analysis. Thermochim. Acta. 2000; 357-358(14): 321-325.
[9] Vilar W. Química e Tecnologia de Poliuretanos. 2 ed. Rio de Janeiro: Vilar Consultoria; 1998.
[10] International Organization for Standardization. ISO document 3386-1. Polymeric materials, cellular flexible: Determination of stress-strain characteristics in compression. Part 1, Low-density materials. Geneva; 1986.
[11] Latinwo G.K. The Predictive Effects of Filler Materials on the Mechanical Properties of Flexible Polyurethane Foam. Ph.D Thesis, University of Lagos, Nigeria, 2009.
[12] Latinwo, G.K., Aribike, D.S., Oyekunle, L.O., Susu, A. A., Kareem, S.A, Effects of Calcium Carbonate of Different Compositions and Particle Size Distribution on the Mechanical Properties of Flexible Polyurethane Foam, Nature and Science, 2010, 8(9), 92-101.
[13] Niemeyer T., Patel M., and Geiger E. A Further Examination of Soy-Based Polyols in Polyurethane Systems. Alliance for the Polyurethane Industry Technical Conference. Salt Lake City, UT, 2006
[14] Sabrina Sá e Sant’Annaa, Denilson Arlindo de Souzaa, Danielle Marques de Araujoa, Cornélio de Freitas Carvalhob, Maria Irene Yoshidaa, Physico-chemical Analysis of Flexible Polyurethane Foams Containing Commercial Calcium Carbonate, Material Research, 2008, 11(4), 433 – 438.
[15] Ganiyu Kayode Latinwo, David Stan Aribike, Alfred Akpoveta Susu, Semiu Adebayo Kareem, Effects of Different Filler Treatments on the Morphology and Mechanical Properties of Flexible Polyurethane Foam Composites, Nature and Science, 2010, 8(6), 23-31.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.