Effect of Varying Corn Cob and Rice Husk Ashes on Properties of Moulding Sand

Sunday Aribo

doi:10.4236/jmmce.2011.1015112

Home > Journals > Chemistry & Materials Science | Engineering > JMMCE

JMMCE> Vol.10 No.15, December 2011

Share This Article:

Effect of Varying Corn Cob and Rice Husk Ashes on Properties of Moulding Sand ()

Abstract Full-Text HTML

Download as PDF (Size:80KB) PP. 1449-1455

DOI: 10.4236/jmmce.2011.1015112 4,829 Downloads 7,176 Views Citations

Author(s) Leave a comment

Sunday Aribo

Affiliation(s)

Department of Metallurgical and Materials Engineering Federal University of Technology, PMB 704, Akure, Nigeria.

ABSTRACT

The use of rice husk and corn cob ashes as aggregates for foundry moulding sand has been studied. 5-12.5 weight percent of rice husk and corn cob ashes were added to the sand mixture and the sand properties determined. A mixture of equal proportion of rice husk and corn cob ashes was also used. In each case, four weight percent water and clay were added to the sand mixture. Some of the properties of the sand tested are: permeability, green compression strength, dry compression strength, green shear strength, dry shear strength, moisture content and permeability. The results showed that the green compression strength, green shear strength, moisture content and permeability decrease with increase in the additives (rice husk ash, corn cob ash, and (50% rice husk and 50% corn cob ashes). While dry compression strength and dry shear strength increase with increase in weight percent of the additives.

KEYWORDS

moulding sand, rice husk, corn cob, ashes, sand properties.

Cite this paper

S. Aribo, "Effect of Varying Corn Cob and Rice Husk Ashes on Properties of Moulding Sand," Journal of Minerals and Materials Characterization and Engineering, Vol. 10 No. 15, 2011, pp. 1449-1455. doi: 10.4236/jmmce.2011.1015112.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Plain P.L. (2000). Principle of Foundry Technology, McGraw –Hill publishing Limited, New Delhi. Pp 100-125

[2]	Aribo S., Folorunso D.O., Olaniran O., and Oladele I.O. (2009). Optimizing the Green Compression Strength and Permeability of Green Sand Made from Epe Silica Sand International Journal of Engineering , India .Vol.3, No 1,.Pp119-126.

[3]	Oladeji, J.T. (2010). Fuel Characterization of Briquettes Produced from Corncob and Rice Husk Resides. Pacific Journal of Science and Technology, 11(1):101-106.

[4]	Mohamed A. Elsayed and Taher M. El Samni (2006). Physical and Chemical Properties of Rice Husk Straw Ash and its Effects on Cement Paste Produced from Different Cement Types. J. King Saud University, Volume 19, Eng Sci(1) Pp 21-30.

[5]	AigedionV.S, Hassan S.B. Olajide S.O, Agunsoye O.J, Abdulrahaman A.S. Okafor G.E. (2008).The Use of Rice Husk Ash as an Aggregate for Foundry Sand Mould Production, Proceeding of the 25th NMS Conference, Nigeria.

[6]	Roa P.N. (2001). Manufacturing Technology, Foundry, Forming, and Welding, Tata, McGraw Hill, New Delhi India. Pp97-106.