Experimental Strain Investigation of Bolt Torque Effect in Mechanically Fastened Joints

Abstract Full-Text HTML XML Download Download as PDF (Size:842KB) PP. 359-367
DOI: 10.4236/eng.2012.47047    4,778 Downloads   8,283 Views   Citations
Author(s)    Leave a comment

ABSTRACT

In this study, a different issue of mechanical engineering interests is determined for threaded fastened joints. A series of photoelastic experiments were performed to determine the maximum strains for the holes in a tensile flat plate subjected to bolt-nut loads. Pertinent strain distributions were examined to determine the roll of the torques on the bolts in mini mizing the strain; hence stress concentration. The experimental determination of maximum strains is needed as a way to validate future theoretical and numerical results, and provide a valuable aid to their application. The emphasis of this paper is on deformation. The results indicate that strains can decrease significantly with the increase of the bolt's pre-load.

Cite this paper

N. Younis, "Experimental Strain Investigation of Bolt Torque Effect in Mechanically Fastened Joints," Engineering, Vol. 4 No. 7, 2012, pp. 359-367. doi: 10.4236/eng.2012.47047.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] N. T. Younis, “Bolt Preload Effects on Stresses around Circular Holes,” Proceedings of the 7th Jordanian International Mechanical Engineering Conference, Amman, Jordan, 2010.
[2] K. T. Chen, K. Ting and W. S. Yang, “Analysis of Stress Concentration Due to Irregular Ligaments in an Infinite Domain Containing a Row of Circular Holes,” Mechanics of Structures and Machines, Vol. 28, No. 1, 2000, pp. 65-84. doi:10.1081/SME-100100612
[3] S. A. Meguid and S. X. Gong, “Stress Concentration around Interacting Circular Holes: A Comparison between Theory and Experiments,” Engineering Fracture Mechanics, Vol. 44, No. 2, 2003, pp.247-256. doi:10.1016/0013-7944(93)90049-X
[4] N. T. Younis, “Assembly Stress for the Reduction of Stress Concentration,” Mechanics Research Communications, Vol. 33, No. 6, 2006, pp. 837-845. doi:10.1016/j.mechrescom.2006.03.007
[5] S. J. Guo, “Stress Concentration and Buckling Behavior of Shear Loaded Composite Panels with Reinforced Cutouts,” Composite Structures, Vol. 80, No. 1, 2007, pp. 1-9. doi:10.1016/j.compstruct.2006.02.034
[6] W. Liqing and G. Bingzheng, “Numerical Computation of Stress Intensity Factors for Bolt-Hole Corner Crack in Mechanical Joints,” Chinese Journal of Aeronautics, Vol. 21, No. 5, 2008, pp. 411-416. doi:10.1016/S1000-9361(08)60053-9
[7] E. Dragoni and D. Castagenetti, “Concentration of Shear Stresses in Shallow Periodic Notches,” The Journal of Strain Analysis for Engineering Design, Vol. 46, No. 6, 2011, pp. 397-404. doi:10.1177/0309324711412152
[8] D. Rees and B. Taylor, “Stress Concentrations for Slotted Plates in Bi-Axial Stress,” Engineering, Vol. 4, No. 2, 2012, pp. 69-75. doi:10.4236/eng.2012.42009
[9] D. W. A. Rees, “Mechanics of Solids and Structures,” Imperial College Press, World Scientific, 2000.
[10] I. R. Grosse and L. D. Mitchell, “Nonlinear Axial Stiffness Characteristics of Axisymmetric Bolted Joints,” ASME Journal of Mechanical Design, Vol. 112, No. 3, 1990, pp. 442-449. doi:10.1115/1.2912628
[11] T. F. Lehnhoff, K. Ko and M. L. McKay, “Member Stiffness and Contact Pressure Distribution of Bolted Joints,” Journal of Mechanical Design, Vol. 116, No. 2, 1994, pp. 550-557. doi:10.1115/1.2919413
[12] T. F. Lehnhoff and B. A. Bunyard, “Bolt Thread and Head Fillet Stress Concentration Factors,” Journal of Pressure Vessel Technology, Vol. 122, No. 2, 2000, pp. 180-185. doi:10.1115/1.556168
[13] R. T. Barrett, “Stress Concentration Factors for Fasteners and Fastener Joints,” American Fastener Journal, Vol. 22, 2005, pp. 60-61.
[14] S. Venkatesan and G. L. Kinzel, “Reduction of Stress Concentration in Bolt-Nut Connectors,” Journal of Mechanical Design, Vol. 128, No. 6, 2006, pp. 1337-1342. doi:10.1115/1.2336254
[15] G. J. Turvey and P. Wang, “An FE Analysis of the Stresses in Pultruded GRP Single-Bolt Tension Joints and Their Implications for Joint Design,” Computers and Structures, Vol. 86, No. 9, 2008, pp. 1014-1021. doi:10.1016/j.compstruc.2007.04.026
[16] F. Gao and H. Kang, “Effect of Pre-Tensioned Rock Bolts on Stress Redistribution around a Roadway,” Journal of China University of Mining and Technology, Vol. 18, No. 4, 2008, pp. 509-515. doi:10.1016/S1006-1266(08)60285-0
[17] K. Iyer, “Solutions for Contact in Pinned Connections,” International Journal of Solids Structure, Vol. 38, No. 50-51, 2001, pp. 9133-9148. doi:10.1016/S0020-7683(01)00054-3
[18] R. Li, D. Kellyand and A. Crosky, “A Strength Improvement by Fiber Steering around a Pin Loaded Hole,” Composite Structure, Vol. 57, No. 1-4, 2002, pp. 377-383. doi:10.1016/S0263-8223(02)00105-8
[19] B. Okutan, “The Effect of Geometric Parameters on the Failure Strength for Pin-Loaded Multi-Directional Fiber- Glass Reinforced Epoxy Laminate,” Composites, Vol. 33, No. 8, 2002, pp. 567-578. doi:10.1016/S1359-8368(02)00054-9
[20] C. T. McCarthy, M. A. McCarthy and V. P. Lawlor, “Progressive Damage Analysis of Multi-Bolt Composite Joints with Variable Hole Clearance,” Composites, Vol. 36, No. 4, 2005, pp. 290-305. doi:10.1016/j.compositesb.2004.11.003
[21] V. Yavari, I. Rajabi, F. Daneshavar and M. H. Kadivar, “On the Stress Distribution around the Hole in Mechanically Fastened Joints,” Mechanics Research Communications, Vol. 36, No. 4, 2009, pp. 373-380. doi:10.1016/j.mechrescom.2008.10.005
[22] M. H. Seleem, I. A. Sharaky and H. E. Sallam, “Flexural Behavior of Steel Beams Strengthened by Carbon Fiber Reinforced Polymer Plates-Three Dimensional Finite Element Simulation,” Materials and Design, Vol. 31, No. 3, 2010, pp. 1317-1324. doi:10.1016/j.matdes.2009.09.010
[23] K. Narmashiri, M. Z. Jumaat and N. H. Sulong, “Investigation on End Anchoring of CFRP Strengthened Steel I-Beams,” International Journal of the Physical Sciences, Vol. 5, No. 9, 2010, pp. 1360-1371.
[24] K. Narmashiri and M. Z. Jumaat, “Reinforced Steel I-Beams: A Comparison Between 2D and 3D Simulation,” Simulation Modeling Practice and Theory, Vol. 19, No. 1, 2011, pp.564-585. doi:10.1016/j.simpat.2010.08.012
[25] J. W. Dally and W. F. Riley, “Experimental Stress Analysis,” Third Edition, McGraw Hill, 1991.
[26] N. T. Younis and L. W. Zachary, “A New Technique for the Determination of Stress-Optical Constants Using the Shadow Spot Method,” Experimental Mechanics, Vol. 29, No. 1, 1989, pp. 75-79. doi:10.1007/BF02327785
[27] Vishay Measurements Group Inc., “Calibration of Photoelastic Coatings,” Technical Note TN-701, 1977.
[28] J. P. Holman, “Experimental Methods for Engineers,” McGraw Hill, 2001.
[29] N. T. Younis, “Designing an Optical Force Transducer,” Optical Engineering, Vol. 42, No. 1, 2003, pp. 151-158. doi:10.1117/1.1526472
[30] I. Alfirevic, F. Matejicek and Z. Vnucec, “Numerical Examination of the Strain Gradient Effect on Accuracy of Birefringent Coating Method,” Transactions on FAMENA, Vol. 24, 2000, pp. 11-20.
[31] Vishay Measurements Group Inc., “Corrections to Photoelastic Coatings Fringe-Order Measurements,” Technical Note TN-706, 2005.
[32] N. T. Younis, “Visualized Photoelastic Images for Stress Concentration Instruction” The 2010 Annual ASEE Conference, Louisville.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.