The Influence of Matrix Content on the Properties of Friction Material

Abstract

The effects of modified inorganic water-based matrix content on the properties of friction material was studied in the present paper, the regular pattern of the influence of friction material’s friction coefficient and wear rate on matrix content have been got. It provides technical support for the study of cold forming friction material, and provides the basis for the development and production of the green pollution-free friction material.

Share and Cite:

Q. Qu, T. Sun, S. Wang and H. Yu, "The Influence of Matrix Content on the Properties of Friction Material," Engineering, Vol. 4 No. 4, 2012, pp. 198-201. doi: 10.4236/eng.2012.44026.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] S. W. Zhang, “Development State of British Friction Material without Asbestos and Its Test Specimen [C],” Proceedings of Friction Material, Vol. 10, 1999, pp. 29-38.
[2] R. Q. Xu and Q. Hu, “Study on the Friction and Wear of Cold Pressed Disk Brake Pad,” Tribology, Vol. 3, No. 9, 1998, pp. 259-262.
[3] J. L. Ye, “Preliminary Discussion the Ten Year’s Practice of Cold-press One-Step Forming Technology,” China Asbestos Specimens, Vol. 3, 2001, pp. 22-25.
[4] Y. J. Zhang and Y. Q. Hu, “Property Comparison between Cold-Press and Hot-Press Clutch Friction Material,” Non-Metallic Mines, Vol. 28, No. 2, 2005, pp. 51-53.
[5] R. J. Lu and Y. Q. Hu, “Cold-Press Process of Friction Materials with Two-Component Resin,” Materials for Mechanical Engineering, Vol. 27, No. 8, 2003, pp. 34-37.
[6] Y. Yu and Y. Q. Hu, “Warm-Press Process of Brake Friction Materials,” Non-Metallic Mines, Vol. 28, No. 1, 2005, pp. 50-52.
[7] T. Zhu and Y. Q. Hu, “Research on Warm-press Process of Clutch Friction Material,” Non-Metallic Mines, Vol. 2, No. 3, 2006, pp. 58-60.
[8] J. F. Wei and Y. Q. Hu, “Preparation of Drum Brake Friction Materials by Warm-Press Process,” Non-Metallic Mines, Vol. 2, No. 3, 2007, pp. 59-61.
[9] Q. W. Qu, J. X. Wan and L. J. Fu, “Research on the New Type of Heat-Fading-Resistance Friction Materials,” Lubrication Engineering, Vol. 33, No. 2, 2008, pp. 104-105.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.