Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites

DOI: 10.4236/ojcm.2012.22006   PDF   HTML     7,711 Downloads   16,961 Views   Citations


Short jute fiber (2 - 3 mm) reinforced polypropylene PP-based composites (20% fiber by weight) were fabricated using compression molding and the mechanical properties were evaluated. Tensile strength (TS), tensile modulus (TM), elongation at break (Eb%), flexural strength (FS), flexural modulus (FM), impact strength (IS), and hardness of the composites were found to be 32 MPa, 850 MPa, 12%, 38 MPa, 1685 MPa, 18 kJ/m2 and 96 shore-A, respectively. Then short E-glass fiber (2 - 3 mm) reinforced PP-based composites (20% fiber by weight) were fabricated and mechanical properties were compared with short jute-based composites. Short jute-based composites showed excellent mechanical properties and comparable to short E-glass-based composites. Soil degradation test of both types of composites indi-cated that jute/PP composites significantly lost much of its mechanical properties but E-glass/PP composites retained major portion of its original integrity. Interfaces of the degraded composites were investigated by scanning electron microscopy and supported the biodegradation properties of jute/PP composites.

Share and Cite:

M. Khan, J. Roy, N. Akter, H. Zaman, T. Islam and R. Khan, "Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites," Open Journal of Composite Materials, Vol. 2 No. 2, 2012, pp. 40-47. doi: 10.4236/ojcm.2012.22006.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] H.-Q. Xie, S. Zhang and D. Xie, “An Efficient Way to Improve the Mechanical Properties of Polypropylene/Short Glass Fiber Composites,” Journal of Applied Polymer Science, Vol. 96, No. 4, 2005, pp. 1414-1420. doi:10.1002/app.21575
[2] D. N. Saheb and J. P. Jog, “Natu-ral Fiber Polymer Composites: A Review,” Advances in Polymer Technology, Vol. 18, No. 4, 1999, pp. 351-363. doi:10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X
[3] S. S. Morye and R. P. Wool, “Mechanical Properties of Glass/Flax Hybrid Composites Based on a Novel Modified Soybeam Oil Matrix Material,” Polymer Composites, Vol. 26, No. 4, 2005, pp. 408-416. doi:10.1002/pc.20099
[4] M. T. Run, H. Z. Song, Y. P. Hao, X. M. Hu and C. G. Yao, “Preparation, Structure, and Properties of the PT- T/SGF Composites,” Polymer Composites, Vol. 30, No. 6, 2008, pp. 776-781. doi:10.1002/pc.20617
[5] M. A. Khan, M. Hossain and K. M. I. Ali, “Jute Composite with MMA by Gamma and UV Radiations in the Presence of Addi-tives,” Journal of Applied Polymer Science, Vol. 74, No. 4, 1999, pp. 900-906. doi:10.1002/(SICI)1097-4628(19991024)74:4<900::AID-APP16>3.0.CO;2-J
[6] R. A. Khan, M. E. Haque, M. A. Khan, H. U. Zaman, K. J. F. Mohamad and A. Ahmad, “Studies on the Relative Degradation and Interfacial Properties between Jute/Polypropylene and Jute/Natural Rubber Composites,” Journal of Thermoplastics Composite Materials, Vol. 25, No. 5, 2010, pp. 665-681.
[7] I. A. T. Razera and E. Frollini, “Composites Based on Jute Fibers and Phenolic Matrices: Properties of Fibers and Composites,” Journal of Applied Po-lymer Science, Vol. 91, No. 2, 2004, pp. 1077-1085. doi:10.1002/app.13224
[8] M. A. Khan, N. Haque, A. A. Kafi, M. N. Alam and M. Z. Abedin, “Jute Reinforced Polymer Composite by Gamma Radiation: Effect of Surface Treatment with UV Radiation,” Polymer Plastic Technology and Engi-neering, Vol. 45, No. 5, 2006, pp. 607-613.
[9] M. A. Khan and M. M. Hassan, “Effect of γ-aminopropyl Trimethoxy Silane on the Performance of Jute-Polycarbonate Composite,” Journal of Applied Polymer Science, Vol. 100, No. 6, 2006, pp. 4142-4147. doi:10.1002/app.23441
[10] M. A. Khan, M. M. Hassan and L. T. Drzal, “Effect of 2-Hydroxyethyl Mathacrylate(HEMA) on the Mechanical and Thermal Properties of Jute-Polycarbonate Composites,” Composites Part A: Applied Science and Manu-facturing, Vol. 36, No. 1, 2005, pp. 71-81. doi:10.1016/j.compositesa.2004.06.027
[11] M. A. Khan, G. Hinrichsen and L. T. Drzal, “Influence of Novel Coupling Agents on Mechanical of Jute Reinforced Polypropylene Com-posite,” Journal of Material Science Letters, Vol. 20, No. 18, 2001, pp. 1711-1713. doi:10.1023/A:1012489823103
[12] H. U. Zaman, M. A. Khan, R. A. Khan, M. A. Rahman, L. R. Das and A. Mamun, “Role of Potassium Permanganate and Urea on the Improvement of the Mechanical Properties of Jute Polypropylene Composites,” Fibers and Polymers, Vol. 11, No. 3, 2010, pp. 455-463. doi:10.1007/s12221-010-0455-4
[13] M. M. I. Khalil, M. E.-S. Naeem and A. E.-S. Gamil, “γ- Irradiation Effects on the Thermal and Structural Characteristics of Modified, Grafted Polypropylene,” Journal of Applied Polymer Science, Vol. 102, No. 1, 2006, pp. 506- 515. doi:10.1002/app.24236
[14] A. C. Karmaker and G. Hinrichen, “Processing and Characterization of Jute Fiber Reinforced Thermoplastic Polymers,” Polymer-Plastic Technology and Engineering, Vol. 30, No. 5-6, 1991, pp. 609-618. doi:10.1080/03602559108019223
[15] M. A. Khan, G. Hi-nrichsen and L. T. Drzal, “Influence of Noble Coupling Agents on Mechanical Properties of Jute Reinforced Polypropylene Composites,” Journal of Materials Science Letters, Vol. 20, No. 18, 2001, pp. 1211- 1713. doi:10.1023/A:1012489823103
[16] R. A. Khan, M. A. Khan, S. Sultana, M. N. Khan, Q. T. H. Shubhra and F. G. Noor, “Mechanical, Degradation and Interfacial Properties of Synthetic Degradable Fiber Reinforced Polypropylene Composites,” Journal of Reinforced Plastics and Composites, Vol. 29, No. 3, 2010, pp. 466-476. doi:10.1177/0731684408100699
[17] A. K. Mohanty and M. Misra, “Studies on Jute Composites a Literature Review,” Polymer Plastic Technology and Engi-neering, Vol. 34, No. 5, 1995, pp. 729-792. doi:10.1080/03602559508009599
[18] M. A. Khan, C. Kopp and G. Hinrichsen, “Effect of Vinyl and Silicon Monomer on Mechanical and Degradation Properties of Bio-Degradable Jute-Biopol? Composite,” Journal of Reinforced Plastics and Composites, Vol. 20, No. 16, 2001, pp. 1414-1429. doi:1106/RH67-0JVE-XX65-D39U
[19] A. A. Kafi, M. Z. Abedin, M. D. H. Beg, K. L. Pickering and M. A. Khan, “Study on the Mechanical Properties of Jute/Glass Fiber-Reinforced Unsaturated Polyester Hybrid Composite: Effect of Surface Modification by Ultraviolet Radiation,” Journal of Reinforced Plastics and Composites, Vol. 25, No. 6, 2006, pp. 575-588. doi:10.1177/0731684405056437
[20] S. Mishra, A. K. Mo-hanty, L. T. Drzal, M. Misra, S. Parija, S. K. Nayak and S. S. Tripathy, “Studies on Mechanical Performance of Biofibre/Glass Reinforced Polyester Hybrid Composites,” Composite Science and Technology, Vol. 63, No. 10, 2003, pp. 1377-1385. doi:10.1016/S0266-3538(03)00084-8

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.