[1]
|
A. C. ?okrak and A. Altuncu, “Gain and Noise Figure Performance of Erbium-Doped Fiber Amplifiers,” Journal of Electrical & Electronics Engineering, Vol. 4, No. 2, 2004, pp. 1111-1122.
|
[2]
|
B. Bouzid, B. M. Ali and M. K. Abdullah. “A High Gain EDFA Design Using Double Pass Amplification with a Band-Pass Filter,” Photonics Technology Letters, Vol. 15, No. 9, 2003, pp. 1195-1197.
doi:10.1109/LPT.2003.814901
|
[3]
|
Y. B. Lu and P. L. Chu, “Gain Flattening by Using Dual- Core Fiber in Erbium-Doped Fiber Amplifier,” IEEE Photonics Technology Letters, Vol. 12, No. 12, 2000, pp. 1616-1617 .
|
[4]
|
A. Mori, T. Sakamoto, K. Shikano, K. Kobayashi, K. Hoshino and M. Shimizu, “Gain Flattened Er3+-Doped Tellurite Fiber Amplifier for WDM Signals in the 1581 - 1616 nm Wavelength Region,” Electronics Letters, Vol. 36, No. 36, 2000, pp. 621-622.
|
[5]
|
C. Yang, “Design and Simulation of Gain-Flattened Ultra Wideband Fiber Amplifiers Covering S-, C-, and L- bands,” Ph. D Thesis, The University of North Carolina at Charlotte, Charlotte, 2003.
|
[6]
|
M. A. Mahdi, K. A. Khairi, B. Bouzid, and M. K. Abdul- lah “Optimum Pumping Scheme of Dual-Stage Triple- Pass Erbium-Doped Fiber Amplifier,” IEEE Photonics Technology Letters, Vol. 16, No. 2, 2004, p. 419.
doi:10.1109/LPT.2003.821059
|
[7]
|
A. Sellami, K. Al-Khateeb and B. Belloui, “The Influence of EDFA’s Configuration on the Behavioral Trends of Gain,” International Conference on Computer and Man- agement, Kuala Lumpur, 9-11 May 2006, pp. 853-856.
|
[8]
|
B. Bouzid, “High-Gain and Low-Noise-Figure Erbium- Doped Fiber Amplifier Employing Dual Stage Quadruple Pass Technique,” Optical Review, Vol. 17, No. 3, 2010, pp. 100-102.
|