Cation Distribution in Lithium Ferrite (LiFe5O8) Prepared via Aerosol Route

DOI: 10.4236/jemaa.2010.21008   PDF   HTML   XML   7,704 Downloads   14,756 Views   Citations


Nano size lithium ferrite was prepared through aerosol route and characterized using TEM, XRD, magnetic measurements and Mössbauer spectroscopy. The particle size of as obtained samples were found to be ~10 nm through TEM, that increases upto ~80 nm on annealing at 1200 oC. The unit cell parameter ‘a’ calculated using XRD, confirms the formation of ?-LiFe5O8. Room temperature Mössbauer spectra of as obtained sample of all the ferrites exhibited broad doublet suggesting super paramagnetic nature. This doublet further resolved into two doublets and assigned to the surface region atoms and internal region atoms of the particles. The annealed samples (1200 oC) show broad sextets, which were fitted with two sextets indicating different local environment of both tetrahedrally and octahedrally coordinated Fe-cation. Cation distribution obtained from the X-ray, magnetic and Mössbauer data confirms that the three fifth of the iron atom goes in to the octahedral site.

Share and Cite:

S. Singhal and K. Chandra, "Cation Distribution in Lithium Ferrite (LiFe5O8) Prepared via Aerosol Route," Journal of Electromagnetic Analysis and Applications, Vol. 2 No. 1, 2010, pp. 51-55. doi: 10.4236/jemaa.2010.21008.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] P. D. Baba and G. M. Argentina, “Microwave lithium ferrites: An overview,” IEEE Transactions Microwave Theory and Techniques, Vol. 22, pp. 652–658, June 1974.
[2] H. M. Widatallah, C. Johnson, F. J. Berry, and M. Pekala, “Synthesis, structural, and magnetic characterisation of magnesium-doped lithium ferrite of composition Li0.5Fe2.5 O4,” Solid State Communications, Vol. 120, pp. 171–175, October 2001.
[3] V. Berbenni, A. Mariniand, and D. Capsoni, “Solid state reaction study of the system Li2CO3/Fe2O3,” Z. Naturforsch, Vol. 53(a), pp. 997–1003, November 1998.
[4] J. S. Baijal, S. Pehanjoubam and D. Kothari, “Hyperfine interactions and magnetic studies of Li-Mg ferrites,” Solid State Communications, Vol. 83, pp. 679–681, September 1992.
[5] H. M. Widatallah and F. J. Berry, “The influence of mechanical milling and subsequent calcination on the formation of lithium ferrites,” Journal of Solid State Chemistry, Vol. 164, pp. 230–236, March 2002.
[6] N. K. Gill and R. K. Puri, “D.C. resistivity of Cr3+ substituted lithium ferrites,” Journal of Materials Science Letters, Vol. 4, pp. 396–398, April 1985.
[7] H. Yang, Z. Wang, M. Zhao, J. Wang, D. Han. H. Luo, and L. Wang, “A study of the magnetic properties of nanocrystalline LiFe5O8 and Li0.5Fe2.3Cr0.2O4 particles,” Materials Chemistry and Physics, Vol. 48, pp. 60–63, March 1997.
[8] A. Ahniyaz, T. Fujwara, S. Song, and M. Yoshimura, “Low temperature preparation of β-LiFe5O8 fine particles by hydrothermal ball milling,” Solid State Ionics, Vol. 151, pp. 419–423, November 2002.
[9] R. Laishram, C. Prakash, S. Phanjoubam, and H. N. K. Sarma, “M?ssbauer effect studies on lithium ferrite substituted with chromium and antimony,” Modern Physics Letters, Vol. B17, pp. 67–73, January 2003.
[10] E. J. Cukauskas, L. H. Allen, H. S. Newman, R. L. Henry, and P. K. Van Damme, “The properties of Y1Ba2Cu3O7?δ thin films with silver doping prepared by spray pyrolysis,” Journal of Applied Physics, Vol. 67, pp. 6946–6952, June 1990.
[11] M. J. Hampden-Smith and T. T. Kodas,” Chemical aspects of aerosol synthesis of inorganic materials,” Journal of Aerosol Science, Vol. 26, S547–S548, September 1995.
[12] S. Singhal, A. N. Garg and K. Chandra, “Evolution of the magnetic properties during the thermal treatment of nanosize BaMFe11O19 (M=Fe, Co, Ni and Al) obtained through aerosol route,” Journal of Magnetism and Magnetic Materials, Vol. 285, pp. 193–198, January 2005.
[13] S. Singhal, S. K. Barthwal, and K. Chandra, “Preparation and characterization of nanosize nickel-substituted cobalt ferrites (Co1?xNixFe2O4),” Journal of Solid State Chemistry, Vol. 178, pp. 3183–3189, October 2005.
[14] S. Singhal, S. K. Barthwal, and K. Chandra,” Structural, magnetic and M?ssbauer spectral studies of nanosize aluminum substituted Nickel-zinc ferrites,” Journal of Magnetism and Magnetic Materials, Vol. 296, pp. 94–103, January 2006.
[15] A. C. F. Costa, E. Tortella, M. R. Morelli, E. F. Neto, and R. H. G. A. Kiminami, “Sintering of Ni-Zn ferrite nano- powders by the constant heating rate (CHR) method, Materials Research,” Vol. 7, pp. 523–528, December 2004.
[16] H. P. Klug and L. E. Alexander, “X-ray diffraction procedures for poly crystalline and amorphous materials,” Second Edition, Wiley, 1974.
[17] M. G. Buerger, “Crystal structure analysis,” Wiley Interscience, New York, 1960.
[18] Y. G. Ma, M. Z. Jin, M. L. Liu, G. Chen, Y. Sui, Y. Tian, G. J. Zhang, and Y. Q. Jia, “Effect of high pressure on M?ssbauer spectra of NiFe2O4 ultrafine particles with different grain sizes, ” Materials Chemistry and Physics, Vol. 65, pp. 79–84, June 2000.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.