Journal of Transportation Technologies

Volume 7, Issue 3 (July 2017)

ISSN Print: 2160-0473   ISSN Online: 2160-0481

Google-based Impact Factor: 2.29  Citations  

Suitability of the Euler’s Spiral for Roadside Clearance in Order to Provide Stopping Sight Distances

HTML  XML Download Download as PDF (Size: 4717KB)  PP. 221-239  
DOI: 10.4236/jtts.2017.73016    2,074 Downloads   2,938 Views  Citations
Author(s)

ABSTRACT

The AASHTO’s guideline for geometric design, also known as the green book, requires that the inside of horizontal curves be cleared of obstructions to sight lines in order to provide sufficient sight distances. Recently, innovative use of Euler’s spiral for determination of clearance offsets has been proposed. However, suitability of the offsets as minimum criteria has not been evaluated. This paper presents comparison between the proposed offsets and minimum offsets determined with the computational method suggested in the green book. Results of comparison show that offsets determined with innovative use of the Euler’s spiral are always longer than minimum values determined with the computational method. The differences in lengths of the two sets of offsets increase with decrease in curve radii. Therefore, on sites with large radii offsets determined through innovative use of the Euler’s spiral may be implemented in the field since the offsets are only slightly longer than minimum offsets. On sites with short radii some offsets on tangent sections are very long such that they result in extra cleared areas that will not accommodate sightlines. The areas that do not accommodate sightlines may result in unnecessary extra earthwork costs where highways are located in cut zones. Additionally, it has been suggested in this paper that designers also consider other curves, including elliptical arcs, for roadside clearance envelopes. One advantage of elliptical arcs is that they are flexible to align with boundaries of clear zones on tangent sections regardless of sizes of radii of horizontal curves. Besides, most offsets to elliptical arcs are comparable to those determined with the green book’s computation method. An example of design chart has been presented for practitioners to use. The chart is for minimum offsets needed to provide a given sight distance while gradually transitioning clearance from boundaries of clear zones on tangent sections.

Share and Cite:

Mauga, T. (2017) Suitability of the Euler’s Spiral for Roadside Clearance in Order to Provide Stopping Sight Distances. Journal of Transportation Technologies, 7, 221-239. doi: 10.4236/jtts.2017.73016.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.